Swivel ball joints
- In Offerta
- Sconto volumi elevati
Thanks to the efficient clamping mechanism, only small amounts of torque on the clamping screw result in comparatively strong clamping pressure on the ball. This force is easily applied by the clamping lever (Identification no.1).
The ball joint can be mounted from below with the d5 internal thread or together with the GN 784.1 flange, available as an accessory, using three through-holes from above.
For a permanent high stop torque, the contact surfaces of the balls must be kept free of grease. Exceeding the recommended tightening torque increases the securing of the ball joint in its end position, but may result in increased wear and potential failure of the clamping mechanism.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
GN 784 / Swivel Ball Joints, Aluminum
Information
GN 784 Swivel ball joints allow precise and variable adjustment of the ball pivot within the rotation range. This is a particular advantage when adjusting scanners, cameras, lighting, monitors, etc.
Thanks to the efficient clamping mechanism, only small amounts of torque on the clamping screw result in comparatively strong clamping pressure on the ball. This force is easily applied by the clamping lever (Identification no. 1).
The ball joint can be mounted from below with the d5 internal thread or together with the GN 784.1 flange, available as an accessory, using three through-holes from above.
For a permanent high stop torque, the contact surfaces of the balls must be kept free of grease. Exceeding the recommended tightening torque increases the securing of the ball joint in its end position, but may result in increased wear and potential failure of the clamping mechanism.
see also...
• Flanges GN 784.1
How to Order
How to order (with female thread) | 1 | d1 |
| 2 | d3 (d2) | |
| 3 | Type | |
| 4 | Identification no. | |
| 5 | Finish |
How to order (with male thread) | 1 | d1 |
| 2 | d4 | |
| 3 | Type | |
| 4 | Identification no. | |
| 5 | Finish |
Specification 
Aluminum
anodized black ELS
• Base plate, ball
Aluminum, blank
• Adjustable hand lever (Identification no. 1)
- Zinc die casting
plastic coated
silver, RAL 9006, textured finish
- Threaded stud and retaining screw
Stainless Steel AISI 303
• Set screw (Identification no. 2)
Stainless Steel AISI 304
• Stainless Steel characteristics
• RoHS compliant
On request
Dimensions
 |  | | | ||||||
| d1 | d2* | r1 | d3** | r2 | d4 | r1 | l1 | ||
| Type A | Type A | Type B | |||||||
| Inch thread | Inch thread | ||||||||
| 23 | M 4 | 17.3 | M 5 | - | 24.8 | M 5 | - | 17.3 | 8 |
| 23 | - | - | - | 1/4 (≙ 1/4-20) | 24.8 | M 6 | 1/4 (≙ 1/4-20) | 17.3 | 10 |
| 31 | M 5 | 21.5 | M 6 | 1/4 (≙ 1/4-20) | 32.5 | M 6 | 1/4 (≙ 1/4-20) | 21.5 | 10 |
| 31 | - | - | - | - | 32.5 | M 8 | - | 21.5 | 12 |
| 39 | M 5 | 25.5 | M 6 | - | 36.2 | M 6 | - | 25.5 | 10 |
| 39 | - | - | M 8 | 3/8 (≙ 3/8-16) | 40.5 | M 8 | 3/8 (≙ 3/8-16) | 25.5 | 12 |
| 49 | M 8 | 30.8 | - | 3/8 (≙ 3/8-16) | 44.8 | M 8 | 3/8 (≙ 3/8-16) | 30.8 | 12 |
| 49 | - | - | M 10 | - | 51.8 | M 10 | - | 30.8 | 15 |
| d1 | d5*** | d6 | d7 | d8 | h1 | h2 | h3 | k | l2 | m | A/F1 | A/F2 | recommended tightening torque of the clamping (Identification no.) in Nm ≈ | resulting stop torque on the ball in Nm ≈ |
| 23 | M 5 | 14 | 11 | 2.5 | 26.6 | 21.7 | 10.6 | 32 | 22 | 7 | 9 | 2.5 | 1.5 | 4.5 |
| 31 | M 6 | 18 | 14 | 3.5 | 35.5 | 29.6 | 14.9 | 36 | 22 | 9 | 12 | 3 | 2.5 | 6.5 |
| 39 | M 8 | 24 | 15 | 4.5 | 45 | 37.2 | 18.9 | 44 | 30 | 12 | 13 | 4 | 4 | 16 |
| 49 | M 8 | 28 | 19.5 | 4.5 | 56 | 46.1 | 24 | 49 | 30 | 16 | 17 | 4 | 4 | 20 |
| Codice componente | Relativo a |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Diameter d1 | Thread d2 (Type A) | Identification No. | Finish | Type | Diametro d1 | Filettatura d2 (tipo A) | N. identificazione | Finitura | Tipo | Filettatura d3 | Filettatura d4 | Filettatura d3 (tipo A) | Filettatura d4 (tipo B) | d5 | d6 | d7 | d8 | r1 | r2 | h1 | h2 | h3 | k | l1 | l2 | m | sw1 | x16 | x17 | r1 | Peso (kg) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
52.60 € 27.88 € | 1 | Disponibile |
Stesso giorno
Stock | - | - | - | - | - | 23 | - | 1, Serraggio con leva manuale regolabile | ELS, nero anodizzato | A, Sfera con filettatura femmina | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | - | - | M 5 | 14 | 11 | 2.5 | 17.3 | 24.8 | 26.6 | 21.7 | 10.6 | 32 | - | 22 | 7 | 9 | 1.5 | 4.5 | - | - | ||
52.90 € | 1 | Disponibile | 7 giorni | - | - | - | - | - | 23 | - | 1, Serraggio con leva manuale regolabile | ELS, nero anodizzato | B, Sfera con filettatura maschio | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | - | - | M 5 | 14 | 11 | 2.5 | 17.3 | - | 26.6 | 21.7 | 10.6 | 32 | 10 | 22 | 7 | 9 | 1.5 | 4.5 | - | 0.250 | ||
| - | 47.86 € | 1 | Disponibile | 7 giorni | 23 | M 4 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 49.26 € 26.11 € | 1 | Disponibile |
Stesso giorno
Stock | 23 | M 5 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
51.46 € | 1 | Disponibile | 7 giorni | - | - | - | - | - | 23 | - | 1, Serraggio con leva manuale regolabile | ELS, nero anodizzato | B, Sfera con filettatura maschio | - | - | - | M 5 | M 5 | 14 | 11 | 2.5 | 17.3 | - | 26.6 | 21.7 | 10.6 | 32 | 8 | 22 | 7 | 9 | 1.5 | 4.5 | 17.3 | 0.150 | ||
59.48 € 31.52 € | 1 | Disponibile |
Stesso giorno
Stock | - | - | - | - | - | 31 | - | 1, Serraggio con leva manuale regolabile | ELS, nero anodizzato | A, Sfera con filettatura femmina | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | - | - | M 6 | 18 | 14 | 3.5 | 21.5 | 32.5 | 35.5 | 29.6 | 14.9 | 36 | - | 22 | 9 | 12 | 2.5 | 6.5 | 21.5 | - | ||
58.90 € 31.22 € | 1 | Disponibile |
Stesso giorno
Stock | - | - | - | - | - | 31 | M 5 | 1, Serraggio con leva manuale regolabile | ELS, nero anodizzato | A, Sfera con filettatura femmina | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | - | - | M 6 | 18 | 14 | 3.5 | 21.5 | 32.5 | 35.5 | 29.6 | 14.9 | 36 | - | 22 | 9 | 12 | 2.5 | 6.5 | 21.5 | 0.160 | ||
| - | 55.20 € 29.26 € | 1 | Disponibile |
Stesso giorno
Stock | 31 | M 5 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
59.78 € 31.68 € | 1 | Disponibile |
Stesso giorno
Stock | - | - | - | - | - | 31 | - | 1, Serraggio con leva manuale regolabile | ELS, nero anodizzato | A, Sfera con filettatura femmina | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | M 6 | - | M 6 | 18 | 14 | 3.5 | 21.5 | 32.5 | 35.5 | 29.6 | 14.9 | 36 | - | 22 | 9 | 12 | 2.5 | 6.5 | 21.5 | 0.100 | ||
| - | 55.70 € | 1 | Disponibile | 7 giorni | 31 | M 6 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
59.18 € 31.37 € | 1 | Disponibile |
Stesso giorno
Stock | - | - | - | - | - | 31 | - | 1, Serraggio con leva manuale regolabile | ELS, nero anodizzato | B, Sfera con filettatura maschio | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | - | M 6 | M 6 | 18 | 14 | 3.5 | 21.5 | - | 35.5 | 29.6 | 14.9 | 36 | 10 | 22 | 9 | 12 | 2.5 | 6.5 | 21.5 | 0.100 | ||
| - | 55.20 € 29.26 € | 1 | Disponibile |
Stesso giorno
Stock | 31 | M 6 | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
59.18 € 31.37 € | 1 | Disponibile |
Stesso giorno
Stock | - | - | - | - | - | 31 | - | 1, Serraggio con leva manuale regolabile | ELS, nero anodizzato | B, Sfera con filettatura maschio | - | - | - | M 8 | M 6 | 18 | 14 | 3.5 | 21.5 | - | 35.5 | 29.6 | 14.9 | 36 | 12 | 22 | 9 | 12 | 2.5 | 6.5 | - | - | ||
| - | 55.20 € | 1 | Disponibile |
Stesso giorno
Stock | 31 | M 8 | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 69.20 € 36.68 € | 1 | Disponibile |
Stesso giorno
Stock | 39 | - | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 63.36 € 33.58 € | 1 | Disponibile |
Stesso giorno
Stock | 39 | - | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 67.36 € 35.70 € | 1 | Disponibile |
Stesso giorno
Stock | 39 | M 5 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 62.50 € | 1 | Disponibile | 7 giorni | 39 | M 6 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 67.70 € | 1 | Disponibile | 7 giorni | 39 | M 6 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 68.70 € | 1 | Disponibile |
Stesso giorno
Stock | 39 | M 8 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 77.96 € 41.32 € | 1 | Disponibile |
Stesso giorno
Stock | 49 | - | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 85.90 € 45.53 € | 1 | Disponibile |
Stesso giorno
Stock | 49 | - | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 84.90 € | 1 | Disponibile | 7 giorni | 49 | M 8 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 85.32 € 45.22 € | 1 | Disponibile |
Stesso giorno
Stock | 49 | M 8 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 79.70 € 42.24 € | 1 | Disponibile |
Stesso giorno
Stock | 49 | M 8 | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 80.88 € 42.87 € | 1 | Disponibile |
Stesso giorno
Stock | 49 | M 10 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 86.18 € | 1 | Disponibile | 7 giorni | 49 | M 10 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 80.48 € 42.65 € | 1 | Disponibile |
Stesso giorno
Stock | 49 | M 10 | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configura
Stock
-
- Indicare solo prodotti a magazzino
Proprietà di base
-
Diameter d1
- 23
- 31
- 39
- 49
-
Thread d2 (Type A)
- M 4
- M 5
- M 6
- M 8
- M 10
-
Identification No.
- 1-Clamping with adjustable hand lever (only for d1=39 and 49)
- 2-Clamping with set screw
-
Finish
- ELS-anodized black
-
Type
- A-Ball with female thread
- B-Ball with male thread
-
Diametro d1
- 23
- 31
-
Filettatura d2 (tipo A)
- M 5
-
N. identificazione
- 1, Serraggio con leva manuale regolabile
-
Finitura
- ELS, nero anodizzato
-
Tipo
- A, Sfera con filettatura femmina
- B, Sfera con filettatura maschio
-
Filettatura d3
- 1/4 (= 1/4-20)
-
Filettatura d4
- 1/4 (= 1/4-20)
-
Filettatura d3 (tipo A)
- M 6
-
Filettatura d4 (tipo B)
- M 5
- M 6
- M 8
-
d5
- M 5
- M 6
-
d6
- 14
- 18
-
d7
- 11
- 14
-
d8
- 2.5
- 3.5
-
r1
- 17.3
- 21.5
-
r2
- 24.8
- 32.5
-
h1
- 26.6
- 35.5
-
h2
- 21.7
- 29.6
-
h3
- 10.6
- 14.9
-
k
- 32
- 36
-
l1
- 8
- 10
- 12
-
l2
- 22
-
m
- 7
- 9
-
sw1
- 9
- 12
-
x16
- 1.5
- 2.5
-
x17
- 4.5
- 6.5
-
r1
- 17.3
- 21.5
-
Tipo
- 784
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- Stesso giorno
- 7 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.