PSE20*, regolatore multicanale del sensore di pressione

PSE20*, regolatore multicanale del sensore di pressione
Multi-Channel Digital Pressure Sensor Controller PSE200 Series that can monitor 4 pressure sensors from a single controller.
[Features]
· Auto-shift function / Auto-preset function / Auto-identification function / Copy function / Channel scan function
· Zero clear function / Keylock function / Peak and bottom values hold and display function / Unit switching function.
· Display value calibration function / Anti-chattering function.
[Applications]
· Used for suction confirmation / leak testing / ejector supply pressure check / placement verification / hydraulic cylinder crimp check.
· Cleaning line supply pressure check / suction verification of work pieces containing moisture.

(i)Nota

  • See catalog for specification details.
  • Product images may be representative images. Refer to the catalog for details.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Multi-Channel Digital Pressure Sensor Controller PSE200 Series Details

Multi-Channel Digital Pressure Sensor Controller PSE200 Series product image

Multi-Channel Digital Pressure Sensor Controller PSE200 Series product image

Multi-Channel Digital Pressure Sensor Controller PSE200 Series Specifications

Model Number Notation

Model number example

Model number example

ModelPSE200PSE201
Power supply voltage12 to 24 V DC ±10%, Ripple (p-p) 10% or less (with reverse connection protection)
Current Consumption55 mA or less (Current consumption for sensor is not included)
Power supply voltage for sensor[Power supply voltage] -1.5 V
Power supply current for sensorNote 1)Maximum 40 mA (100 mA maximum for the total power supply when 4 sensors are input)
Sensor input-1 to 5 V DC (Input impedance: approx. 800 kΩ)
Number of inputs4 inputs
Input protectionWith excess voltage protection (Up to 26.4 V)
Switch output-NPN open collector output: 5 outputs
(Sensor input 1CH: 2 outputs, 2 to 4CH: 1 output)
PNP open collector output: 5 outputs
(Sensor input 1CH: 2 outputs, 2 to 4CH: 1 output)
Max Load Current80 mA
Maximum applied voltage30 V-
Residual Voltage1 V or less (with load current of 80 mA)
Response time5 ms or less (Response time selections with anti-chattering function: 20 ms, 160 ms, 640 ms)
Short-circuit protectionEquipped
Repeat accuracy±0.1% F.S. ±1 digit
HysteresisHysteresis modeAdjustable (can be set from 0)
Window comparator modeFixed (3 digits)
Display MethodFor measured value display: 4-digit 7-segment display, Display color: orange (Sampling frequency: 4 times / sec)
For channel display: 1-digit 7-segment display, Display color: red
Display accuracy (at an operating temperature of 25°C)±0.5% F.S. ±1 digit
Status LEDsRed (lights up when output is turned ON)
Auto-shift inputNon-voltage input (reed or solid state), Input 10 ms or more, Independently controllable auto-shift function ON/OFF
Auto-identification functionWith auto-identification functionNote 2)
Environmental resistanceEnclosureFront face: IP65 (when panel mounted), Others: IP40Note 3)
Ambient temperature rangeDuring operation: 0 to 50°C, During storage: -10 to 60°C (No condensation or freezing)
Ambient humidity rangeWhen operating/stored: 35 to 85% RH (no condensation)
Temperature characteristics±0.5% F.S. (25°C reference)
ConnectionPower supply / output connection: 8P connector, Sensor connection: e-con
MaterialHousing: PBT, Display: transparent nylon, Back rubber cover: CR
Weight60 g (excluding power supply / output connection cable)
Power supply / Output connection cableHeat-resistant heavy-duty cable, 8 cores ø4.8 (4.8‑mm diameter) 2 m, Conductor area: 0.15 mm2 Insulator O.D.: 0.9 mm
StandardCE / CSA

Note 1) If the Vcc and 0 V side of the sensor input connector are short circuited, the inside of the controller will be damaged.
Note 2) Auto-identification function comes with the "PSE53□ Series" only. Other series made by the same manufacturer (PSE540, 560, 570) are not equipped with this function.
Note 3) IP40 specification when using the □48 conversion adapter.

Internal Circuits and Wiring Examples

PSE200-(M)□

PSE200-(M)□

  • NPN open collector 5 outputs + Auto-shift 1 input specification
PSE201-(M)□

PSE201-(M)□

  • PNP open collector 5 outputs + Auto-shift 1 input specification

Multi-Channel Digital Pressure Sensor Controller PSE200 Series Dimensions

PSE200/PSE201

 

(Unit: mm)

 

PSE200/PSE201 dimensional drawing

PSE200/PSE201 dimensional drawing

Front Protective Cover + Panel-Mount Adapter

Multi-Channel Digital Pressure Sensor Controller PSE200 Series (Front Protective Cover + Panel-Mount Adapter) dimensional drawing

Multi-Channel Digital Pressure Sensor Controller PSE200 Series (Front Protective Cover + Panel-Mount Adapter) dimensional drawing

Codice componente
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Details Type

Loading...

Informazioni di base

Tipo Raccordi in metallo

Supporto tecnico