Confermato
- Funzione aggiuntiva
- Portata consumo di aria(L/min)
- 60
- Profilo attacco di collegamento apertura vuoto
- Altro
- G1/8
- Profilo attacco di collegamento porta di mandata aria
- Applicazione
- Flusso di aspirazione(L/min)
- 38
- Diam. ugello
- 1.0mm
- Combinazione di valvola di mandata e valvola di rilascio
- Ingresso elettrico
- LED / circuito di protezione
- Tipo interruttore per vuoto
- Posizione ingresso porta per vuoto
- Tensione nominale elettrovalvola
- Ingresso elettrico interruttore per vuoto
- Ago di regolazione portata di rottura vuoto
- Specifiche personalizzate
- Con contrassegno CE
- Pressione di mandata standard(MPa)
- 0.35
- Tipo
- CAD
- 2D
- 3D
- Giorni di spedizione est.
- Tutti
- Entro 26 giorni lavorativi
ZM, eiettore per il vuoto con valvola e commutatore (sistema metrico) (ZM101MF-A5G-Q)
Informazioni sul prodotto
Vacuum Ejector With Valve And Switch, ZM Series Specifications
Vacuum Ejector With Valve And Switch, ZM Series external appearance
Ejector system circuit
Display symbols
The air suction volume has been increased by 40% thanks to its 2-stage nozzle construction
ZM Series example applications
Vacuum Ejector Specifications
| Usable Fluids | Air | |
|---|---|---|
| Maximum Operating Pressure | 0.7 MPa | |
| Maximum Vacuum Pressure | -84 kPa | |
| Supply Pressure Range | Air Pressure Supply (P) Port (Without Valve) | 0.2 to 0.55 MPa |
| Air Pressure Supply (P) Port (With Valve) | 0.25 to 0.55 MPa | |
| Pilot Supply Ports For Supply And Release (PA, PB) Note: | P port pressure to 0.55 MPa | |
| Operating Temperature Range | Without Valve | 5 to 60°C |
| With Valve | 5 to 50°C | |
| Air Supply Valve Vacuum Release Valve | Main valve – poppet type Pilot valve – V114, V124 | |
| Vacuum Pressure Switch | Electronic type – ZSE1-00-□□ Diaphragm type – ZSM1-0□□ | |
| Suction Filter | Filtration degree: 30 μm, Material: Polyethylene | |
Note: Supply/release valve combinations P5 and Q5.
The product's supply and release valves have been designed to operate using the pressure from the air pressure supply (P) port. The pressure supplied to the pilot supply ports for supply and release (PA and PB) should be as high or higher than the pressure of the air pressure supply port (P) but no higher than 0.55 MPa.
Valve Specifications
| Operation Method | Pilot method |
|---|---|
| Main Valve | Poppet |
| Effective Sectional Area | 3 mm2 |
| Cv Value | 0.17 |
| Operating Pressure | 0.25 to 0.7 MPa |
| Electrical Entry | Plug connector, grommet (DC only) |
| Maximum Operating Frequency | 5 Hz |
| Voltage | 24/12/6/5/3 V DC, 100/110 V AC (50/60 Hz) |
| Power Consumption | DC: 0.35 W (0.4 W with lamp), 100 V AC: 0.78 W (0.81 W), 110 V AC: 0.86 W (0.89 W) |
Drawing / System Circuit
(Unit: mm)
Single Unit / Without Valve, Basic Type
ZM□2□□H/M/S□ system circuit
ZM□2□□H/M/S□ dimensional drawing
- *Silencer: The sound damping type and standard type share the same dimensions.
- *Vacuum port (V): Side entry types are equipped with plugs.
Single Unit / Without Valve, Basic Type With Switch
ZM□2□□H/M/S□-□□ system circuit
ZM□2□□H/M/S□-□□ dimensional drawing
- *Silencer: The sound damping type and standard type share the same dimensions.
- *Vacuum port (V): Side entry types are equipped with plugs.
Structural Drawing / ZM□1□-□□L-E□
ZM□1□-□□L-E□ structural drawing
Components
| Number | Part Name | Material | Note |
|---|---|---|---|
| 1 | Body | Aluminum die-casted | - |
| 2 | Valve Cover | Resin | - |
| 3 | Adapter Plate | Resin | - |
| 4 | Cover | Zinc die-casted | Without switch: ZM-HCA, With switch: ZM-HCB |
| 5 | Tension Bolt | Stainless steel / polyacetal | - |
Replacement Parts
| Number | Part Name | Material | Note |
|---|---|---|---|
| 6 | Vacuum Break Flow Adjusting Needle | Brass / electroless nickel plating | ZM-NA (with lock nut: ZM-ND-L) |
| 7 | Filter Cover Assembly | - | ZM-FCB-0 |
| 8 | Diffuser Assembly | - | ZM nozzle diameter 0 standard supply pressure-0 |
| 9 | Suction Filter | Polyethylene | ZM-SF |
| 10 | Silencer Assembly | - | ZM-SA (high noise reduction specification: ZM-SA-D) |
| 11 | Pilot Valve | - | Z1-V114-□□□□ V124-□□□□ |
| 12 | Poppet Valve Assembly | - | ZMA-PV2-0 |
| 13 | Vacuum Pressure Switch | - | ZSE1-00-□□ ZSM1-015 ZSM1-021 |
| 14 | Check Valve | NBR | ZM-CV |
Notes
- When the pilot valve for air supply is turned ON, air flows to the diffuser assembly, generating a vacuum. When the pilot valve for vacuum release is turned ON, air flows to the vacuum port side and the vacuum is immediately released. The release speed can be adjusted by regulating the flow rate adjustment screw. When the supply valve is turned OFF, the atmospheric pressure causes the air to flow back from the silencer, thus releasing the vacuum. However, in order to properly release a vacuum, a vacuum release valve must be used.
- *Because the filter cover is made of polycarbonate, do not use it with or expose it to the following chemicals: paint thinner, carbon tetrachloride, chloroform, acetic ester, aniline, cyclohexane, trichloroethylene, sulfuric acid, lactic acid, water-soluble cutting oil (alkalinic), etc. Also, do not expose it to direct sunlight.
- *Turning the release flow rate adjustment screw 4 full turns from the fully closed position renders the valve fully open. Do not turn more than 4 times, as turning excessively may cause the screw to fall off. In order to prevent the screw from loosening and falling off, a vacuum break flow rate adjusting needle with lock nut is also available.
- *Refer to the manufacturer's catalog for product information not detailed above.
- *The product images may be representative images only.
Ulteriori informazioni
Informazioni di base
An ejector manufactured by SMC.
[Features]
· All-in-one.
· Capable of manifolding.
· Maximum suction flow rate increased by 40%.
· Maximum vacuum pressure -84 kPa.
· Compact and lightweight.
· Air-operated type.
Attenzione
- Le immagini dei prodotti possono essere solo immagini rappresentative. Fare riferimento al catalogo del produttore per i dettagli sulla forma.
Catalogo
Loading...
Il codice componente è stato confermato