ITV00**, regolatore elettropneumatico compatto
[Features]
· Stepless control of air pressure proportional to an electrical signal.
· ITV1000, 2000 and 3000 Series are compatible with various input specifications including serial communications.
· Compact and lightweight (integrated communications).
· Straight and right angle types available.
· With error indication LED.
· Flat bracket and L-bracket types available.
(i)Nota
- Le immagini dei prodotti possono essere solo immagini rappresentative. Fare riferimento al catalogo del produttore per i dettagli sulla forma.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Compact Vacuum Regulator ITV009□ Series Specifications
Compact Vacuum Regulator ITV009□ Series external appearance
Specifications
| Model | ITV009□ | ||
|---|---|---|---|
| Minimum Supply Pressure | Set pressure -1 kPa | ||
| Maximum Supply Pressure | -101 kPa | ||
| Set Pressure Range | -1 to -100 kPa | ||
| Power Supply | Voltage | 24 V DC ±10%, 12 to 15 V DC | |
| Current Consumption | Power supply voltage 24 V DC type: 0.12 A or less Power supply voltage 12 to 15 V DC type: 0.18 A or less | ||
| Input Signal | Voltage Type | 0 to 5 V DC, 0 to 10 V DC | |
| Current Type | 4 to 20 mA DC, 0 to 20 mA DC (sink type) | ||
| Input Impedance | Voltage Type | Approx. 10 k Ω | |
| Current Type | Approx. 250 Ω | ||
| Output Signal Note 4: | Analog Output | 1 to 5 V DC (output impedance: approx. 1 kΩ) Output accuracy ±6% F.S. or less | |
| Linearity | ±1% F.S. or less | ||
| Hysteresis | 0.5% F.S. or less | ||
| Repeatability | ±0.5% F.S. or less | ||
| Sensitivity | 0.2% F.S. or less | ||
| Temperature Characteristics | ±0.12% F.S. / °C or less | ||
| Operating Temperature Range | 0 to 50°C (no condensation) | ||
| Enclosure | IP65 equivalent * | ||
| Connection Type | Built-in one-touch fittings | ||
| Connection Size | For Single Unit | Metric Size | [1], [2], [3]: ø4 mm |
| Inch Size | [1], [2], [3]: ø5/32" | ||
| Manifold | Metric Size | [1], [3]: ø6 mm, [2]: ø4 mm | |
| Inch Size | [1], [3]: ø1/4", [2]: ø5/32" | ||
| Weight Note 1: | 100 g or less (without options) | ||
Note 1: Indicates the weight of a single unit.
For IITV00-n,
Total weight (g) ≤ number of stations (n) ×; 100 + 130 (weight of end block A and B assemblies) + DIN rail weight (g).
Note 2: When there is a downstream flow consumption, the pressure may become unstable depending on the tubing conditions.
Note 3: While the power is on, the solenoid valve may make noise when operating. This noise is normal and does not indicate a fault.
Note 4: When measuring ITV analog output from 1 to 5 V DC, if the load impedance is less than 100 kΩ, the analog monitor output accuracy of ±6% F.S. or less may not be achievable. If an accuracy within ±6% is required, contact the manufacturer for further assistance. Output pressure remains unaffected.
*When using under conditions equivalent to IP65, connect the fitting or tube to the breathing hole prior to use.
(Refer to the manufacturer's catalog for details.)
Operating Principles
When the input signal rises, the vacuum pressure solenoid valve (1) turns ON. Due to this, part of the vacuum pressure (VAC.) supply passes through the vacuum pressure solenoid valve (1) and becomes vacuum pressure. This vacuum pressure feeds back to the control circuit (4) via the pressure sensor (3). Here, pressure corrections continue through alternate operation of the vacuum pressure solenoid valve and atmospheric pressure solenoid valve until the vacuum pressure becomes proportional to the input signal, thus supplying vacuum pressure that is consistently proportional to the input signal.
Operating principle drawing
Block diagram
Drawing
(Unit: mm)
Single unit dimensional drawing 1
Single unit dimensional drawing 2
Single unit dimensional drawing 3
Single unit dimensional drawing 4
Port Positions
| No. | [1] | [2] | [3] |
|---|---|---|---|
| ITV009□ | VAC | OUT | ATM |
Note: When using under conditions equivalent to IP65, connect the fitting or tube to the breathing hole prior to use. (Refer to the manufacturer's catalog for details.)
Single unit for manifold dimensional drawing
- When using under conditions equivalent to IP65, connect the fitting or tube to the breathing hole prior to use. (Refer to the manufacturer's catalog for details.)
- *Refer to the manufacturer's catalog for cable connector dimensions.
Linearity, Hysteresis
Linearity and hysteresis graph
Repeatability
Repeatability graph (at 50% of signal input)
Notes
- *Refer to the manufacturer's catalog for product information not detailed above.
- *Product images are representative images only.
Codice componente
|
|---|
| ITV0090-3BL |
| ITV0090-3N |
| Codice componente | Relativo a |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Connettore cavo | Staffa | |
|---|---|---|---|---|---|---|---|
318.06 € | 1 | 4 giorni | Ad angolo retto 2m | Staffa piatta | |||
295.44 € | 1 | 4 giorni | Senza connettore cavo | Senza staffa |
Loading...
Informazioni di base
| Tipo | Regolatore elettronico del vuoto | Metodo di controllo | Pilota interno | Profilo | Standard |
|---|---|---|---|---|---|
| Lato mandata, tipo di collegamento | Tubo ad azione singola | Lato di mandata, diametro tubo di collegamento | Ø4 | Lato controllo, tipi di collegamento | Tubo ad azione singola |
| Diametro tubo di collegamento lato di controllo | Ø4 | Gamma di pressioni regolate(kPa) | -1::-100 | Segnale di ingresso | 0–10V DC |
| Specifiche tubazioni | Per unità singola | Tensione di alimentazione | 24V DC |
Configura
Proprietà di base
-
Connettore cavo
- Ad angolo retto 2m
- Senza connettore cavo
-
Staffa
- Senza staffa
- Staffa piatta
-
Tipo
- ITV0090
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 4 giorni o meno
Attributi opzionali
- The product images may be representative images only. Refer to the manufacturer's catalog for shape details.
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.