ITV00**, regolatore elettropneumatico compatto

ITV00**, regolatore elettropneumatico compatto
Vacuum regulator with built-in one-touch tube fittings.
[Features]
· Stepless control of air pressure proportional to an electrical signal.
· ITV1000, 2000 and 3000 Series are compatible with various input specifications including serial communications.
· Compact and lightweight (integrated communications).
· Straight and right angle types available.
· With error indication LED.
· Flat bracket and L-bracket types available.

(i)Nota

  • Refer to the manufacturer's catalog for specifications and material details.
  • The product images may be representative images only. Refer to the manufacturer's catalog for shape details.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Compact Vacuum Regulator ITV009□ Series Specifications

Compact Vacuum Regulator ITV009□ Series external appearance

Compact Vacuum Regulator ITV009□ Series external appearance

Specifications

Model ITV009□
Minimum Supply Pressure Set pressure -1 kPa
Maximum Supply Pressure -101 kPa
Set Pressure Range -1 to -100 kPa
Power Supply Voltage 24 V DC ±10%, 12 to 15 V DC
Current Consumption Power supply voltage 24 V DC type: 0.12 A or less
Power supply voltage 12 to 15 V DC type: 0.18 A or less
Input Signal Voltage Type 0 to 5 V DC, 0 to 10 V DC
Current Type 4 to 20 mA DC, 0 to 20 mA DC (sink type)
Input Impedance Voltage Type Approx. 10 k Ω
Current Type Approx. 250 Ω
Output Signal Note 4: Analog Output 1 to 5 V DC (output impedance: approx. 1 kΩ)
Output accuracy ±6% F.S. or less
Linearity ±1% F.S. or less
Hysteresis 0.5% F.S. or less
Repeatability ±0.5% F.S. or less
Sensitivity 0.2% F.S. or less
Temperature Characteristics ±0.12% F.S. / °C or less
Operating Temperature Range 0 to 50°C (no condensation)
Enclosure IP65 equivalent *
Connection Type Built-in one-touch fittings
Connection Size For Single Unit Metric Size [1], [2], [3]: ø4 mm
Inch Size [1], [2], [3]: ø5/32"
Manifold Metric Size [1], [3]: ø6 mm, [2]: ø4 mm
Inch Size [1], [3]: ø1/4", [2]: ø5/32"
Weight Note 1: 100 g or less (without options)

Note 1: Indicates the weight of a single unit.
For IITV00-n,
Total weight (g) ≤ number of stations (n) ×; 100 + 130 (weight of end block A and B assemblies) + DIN rail weight (g).
Note 2: When there is a downstream flow consumption, the pressure may become unstable depending on the tubing conditions.
Note 3: While the power is on, the solenoid valve may make noise when operating. This noise is normal and does not indicate a fault.
Note 4: When measuring ITV analog output from 1 to 5 V DC, if the load impedance is less than 100 kΩ, the analog monitor output accuracy of ±6% F.S. or less may not be achievable. If an accuracy within ±6% is required, contact the manufacturer for further assistance. Output pressure remains unaffected.
*When using under conditions equivalent to IP65, connect the fitting or tube to the breathing hole prior to use.
 (Refer to the manufacturer's catalog for details.)

Operating Principles

When the input signal rises, the vacuum pressure solenoid valve (1) turns ON. Due to this, part of the vacuum pressure (VAC.) supply passes through the vacuum pressure solenoid valve (1) and becomes vacuum pressure. This vacuum pressure feeds back to the control circuit (4) via the pressure sensor (3). Here, pressure corrections continue through alternate operation of the vacuum pressure solenoid valve and atmospheric pressure solenoid valve until the vacuum pressure becomes proportional to the input signal, thus supplying vacuum pressure that is consistently proportional to the input signal.

 
Operating principle drawing

Operating principle drawing

Block diagram

Block diagram

Drawing

 

(Unit: mm)

 

Single unit dimensional drawing 1

Single unit dimensional drawing 1

Single unit dimensional drawing 2

Single unit dimensional drawing 2

Single unit dimensional drawing 3

Single unit dimensional drawing 3

Single unit dimensional drawing 4

Single unit dimensional drawing 4

Port Positions

No. [1] [2] [3]
ITV009□ VAC OUT ATM

Note: When using under conditions equivalent to IP65, connect the fitting or tube to the breathing hole prior to use. (Refer to the manufacturer's catalog for details.)

Single unit for manifold dimensional drawing

Single unit for manifold dimensional drawing

  • When using under conditions equivalent to IP65, connect the fitting or tube to the breathing hole prior to use. (Refer to the manufacturer's catalog for details.)
  • *Refer to the manufacturer's catalog for cable connector dimensions.

Linearity, Hysteresis

Linearity and hysteresis graph

Linearity and hysteresis graph

Repeatability

Repeatability graph (at 50% of signal input)

Repeatability graph (at 50% of signal input)

Notes

  • *Refer to the manufacturer's catalog for product information not detailed above.
  • *Product images are representative images only.
Codice componente
ITV0090-3BL
ITV0090-3N
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Connettore cavo Staffa

318.06 €

1 4 giorni Ad angolo retto 2mStaffa piatta

295.44 €

1 4 giorni Senza connettore cavoSenza staffa

Loading...

  1. 1

Informazioni di base

Tipo Regolatore elettronico del vuoto Metodo di controllo Pilota interno Profilo Standard
Lato mandata, tipo di collegamento Tubo ad azione singola Lato di mandata, diametro tubo di collegamento Ø4 Lato controllo, tipi di collegamento Tubo ad azione singola
Diametro tubo di collegamento lato di controllo Ø4 Gamma di pressioni regolate(kPa) -1::-100 Segnale di ingresso 0–10V DC
Specifiche tubazioni Per unità singola Tensione di alimentazione 24V DC

Supporto tecnico