- Applicazione
- Metodo di installazione
- Caratteristiche
- Numero di solenoidi
- Tipo singolo
- Tipo singolo
- A commutazione
- Tensione
- Tipo di attacco tubo
- G
- Filettatura tubazione nominale
- Tubazioni
- Valore CV
- 0.58
- Pressione nominale(MPa)
- Mandata aria pilota
- Interruttore manuale
- Specifiche bobina
- Ingresso elettrico conduttore
- Manuale
- Spia / circuito di protezione
- Staffa
- Specifiche su ordinazione
- Conformità CE
- Opzioni corpo
- Tipo
- CAD
- 2D
- 3D
- Giorni di spedizione est.
- Tutti
- Entro 26 giorni lavorativi
SYJ7000, elettrovalvola a 5 vie, montaggio su base e attacchi su corpo (SYJ7120-3YO-01F-Q)
Informazioni sul prodotto
5-Port Solenoid Valve, Rubber Seal, SYJ7000 Series Specifications
SYJ7000 Series body ported type external appearance
SYJ7000 Series base mounted type external appearance
| *1: Response Time ms (At 0.5 MPa) | 2 Position Single, Double | 30 or less |
|---|---|---|
| 3 Position | 60 or less | |
| Maximum Operating Frequency Hz | 2 Position Single, Double | 5 |
| 3 Position | 3 | |
| Manual Operation | Non-locking push type, push-turn locking type screwdriver-operated type, push-turn locking manual-operation type | |
| Pilot Exhaust Method | Pilot valve individual exhaust type, main valve / pilot valve common exhaust type | |
| Lubrication | Not required | |
| Mounting Orientation | Free | |
| *2: Impact Resistance / Vibration Resistance: m/s2 | 150/30 | |
| Enclosure | Dust-proof (*3) DIN terminal and M8 connector are IP65) | |
*1: Based on JIS B8419:2010 dynamic performance testing. (Coil temperature of 20°C, at rated voltage, with no surge voltage suppressor)
*2: Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
*3: Based on IEC60529.
Solenoid Specifications
| Electrical Entry | Grommet (G)/(H) L-type plug connector (L) M-type plug connector (M) DIN terminal (D)/(Y) M8 connector (W) | |||
|---|---|---|---|---|
| G, H, L, M, W | D, Y | |||
| Coil rated voltage (V) | DC | 24, 12, 6, 5, 3 | 24, 12 | |
| AC 50/60 Hz | 100, 110, 200, 220 | |||
| Allowable Voltage Fluctuation | ±10% of rated voltage* | |||
| Power Consumption W | DC | Standard | 0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)] | |
| With power saving circuit | 0.1 (only with light) * [Startup 0.4, holding 0.1] | |||
| *Apparent Power VA | AC | 100 V | 0.78 (with light: 0.81) | 0.78 (with light: 0.87) |
| 110 V 115 V | 0.86 (with light: 0.89) [0.94 (with indicator light: 0.97)] | 0.86 (with light: 0.97) [0.94 (with light: 1.07)] | ||
| 200 V | 1.18 (with light: 1.22) | 1.15 (with light: 1.30) | ||
| 220 V [230 V] | 1.30 (with light: 1.34) [1.42 (with light: 1.46)] | 1.27 (with light: 1.46) [1.39 (with light: 1.60)] | ||
| Surge Voltage Suppressor | Diode (varistor for DIN terminal and non-polar type are ) | |||
| Indicator Light | LED (neon bulb for DIN terminal AC) | |||
- *The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
- For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
- For details, see the SMC catalog.
Structure Drawing
2-position single structure drawing / connection drawing
2-position double structure drawing / connection drawing
3-position closed center / exhaust center / pressure center structure drawing / connection drawing
*Drawing shows closed center type
| Number | Part name | Material | Note | |
|---|---|---|---|---|
| 1 | Body | Die-cast aluminum | Urban white | |
| 2 | Piston Plate | Resin | Urban white | |
| 3 | End Cover | Die-cast aluminum | Urban white | |
| 4 | Piston | Resin | - | |
| 5 | Spool Valve Assembly | Aluminum/H-NBR | - | |
| 6 | Spool Spring | SUS | - | |
| 7 | Sub-plate * | - | 1/8 | Aluminum diecast |
| - | 1/4 | |||
| 8 | Pilot Valve | - | - | |
*Add "-Q" to the end of model numbers for CE compliance.
2-position single drawing
*Values in [ ] are for AC.
(Unit: mm)
Grommet (G), (H): SYJ7120-□G/H□□-01□ dimensional drawings
(Unit: mm)
With bracket: SYJ7120-□G/H□□-01□-F dimensional drawings
(Unit: mm)
Built-in single-action fitting type: SYJ7120-□G/H□□-C6/C7/C8/C9□ (-F) dimensional drawings
(Unit: mm)
L plug connector (L): SYJ7120-□L□□-01□ (-F) dimensional drawing
(Unit: mm)
M plug connector (M): SYJ7120-□M□□-01□ (-F) dimensional drawing
*See the manufacturer's catalog for information other than that above.
Ulteriori informazioni
Informazioni di base
SMC Solenoid Valve.
[Features]
· Improved pilot valve strength
Attenzione
- Le immagini dei prodotti possono essere rappresentative. Fare riferimento al catalogo del produttore per i dettagli.