VQZ**2*, serie 1000 / 2000 / 3000, elettrovalvola a 5 vie, attacchi su corpo (VQZ2120-5LO1-C4-Q)

5-Port Solenoid Valve VQZ1000/VQZ2000/VQZ3000 Series, Body-Ported Type, Plug Lead Unit, Single Unit Specifications

VQZ1000/VQZ2000/VQZ3000 Series external appearance

Series			Metal Seal	Rubber Seal
Usable Fluids			Air
Maximum Operating Pressure (MPa)			0.7 (High-pressure type: 1.0	0.7
Minimum Operating Pressure MPa	2 Position	Single	0.1 VQZ3000, 3 position only 0.15	0.15
				0.1
	3 Position	Double		0.2
Ambient Temperature and Operating Fluid Temperature °C			-10 to 50 (no freezing)
Maximum Operating Frequency Hz	2 Position Single, Double		20	5
	3 Position		10	3
Manual			Non-locking push type, locking type (tool required)
Pilot Exhaust Method			Individual exhaust type
Lubrication			Not required
Mounting Orientation			Single: free Double / 3 position: main valve must be horizontal	Free
Impact Resistance / Vibration Resistance: m/s2 *1:			150/30
Protective structure*3			Dust-proof (DIN terminal: IP65 *2:)

*1: Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
*2: VQZ2/3□21□-□Y□□W1-□-□ when IP65 compatible DIN terminal is selected
*3: Based on IEC60529.

Solenoid Specifications

• *The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
• For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.

Structure Drawing

Metal seal type

2 position single structure drawing

2-position single connection drawing

2-position double structure drawing

2-position double connection drawing

Rubber seal type

2 position single structure drawing

2-position single connection drawing

2-position double structure drawing

2-position double connection drawing

Component Parts

Dimensional Outline Drawings / VQZ1000

2-position single

(Unit: mm)

Grommet (G): VQZ1120/1-□G□1-C3, C4, C6 dimensional drawings

Precautions

• *Use the standard (DC) specification for continuous duty.
• *See the manufacturer's catalog for models of single-action fittings and silencers that mount to this valve.
• *Manifold mounting screws and gaskets are not included when ordering single unit body ported type solenoid valves. Please order separately if required. (See the manufacturer's catalog for details.)
• *See the manufacturer's catalog for information other than the above.