Registrati
Confermato
SMC

SQ1*3*, serie 1000, elettrovalvola a 5 vie, tipo ad innesto (Nuovi Prodotti) (SQ1330-51-C4-Q)

SQ1*3*, serie 1000, elettrovalvola a 5 vie, tipo ad innesto (Nuovi Prodotti) SQ1330-51-C4-Q

Codice componente:

SQ1330-51-C4-Q
Cancella
Quantità:
Loading...

Informazioni sul prodotto

Plug-In Unit SQ1000 Series Specifications

Plug-in unit SQ1000 Series external appearance

Plug-in unit SQ1000 Series external appearance

The single-action fittings can be replaced without removing the valve

The single-action fittings can be replaced without removing the valve

The connector entry direction can be changed with a single push

The connector entry direction can be changed with a single push

Valve Specifications Valve Construction Metal Seal Rubber Seal
Fluid Air
Maximum Operating Pressure 0.7 MPa (high-pressure type *3: 1.0 MPa)
Minimum Operating Pressure Single 0.1 MPa 0.15 MPa
Double (double solenoid) 0.1 MPa 0.1 MPa
3 position 0.1 MPa 0.2 MPa
4 Position Type - 0.15 MPa
Ambient Temperature and Operating Fluid Temperature -10 to 50°C *1
Lubrication Not required
Pilot Valve – Manual Operation Push type / locking type (tool required)
Vibration-Resistance / Impact-Resistance *2 30/150 m/s2
Enclosure Dust-proof
Solenoid Specifications Coil Rated Voltage 12, 24 V DC
Allowable Voltage Fluctuation ±10% of rated voltage
Coil Insulation Type Class B or equivalent
Power Consumption
(Current) 		24 V DC DC 0.4 W (17 mA), DC 0.95 W (40 mA) *4
12 V DC DC 0.4 W (34 mA), DC 0.95 W (80 mA) *4

*1: Use dry air when operating at low temperatures. No condensation.
*2: Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state).
*3: Metal-seal type only.
*4: Values for high-speed response type and high-pressure type.

Model

Series Switching Method Sealing Method Model Flow Rate Characteristics *1 Response Time [ms] *2 Weight
(g)
1 → 4/2 (P → A/B) 4 → 5 (A → R1) Standard (0.4 W) High Speed Response (0.95 W)
C (dm3/ [s·bar]) b Cv C (dm3/ [s·bar]) b Cv
SQ1000 2 Position Single Metal Seal SQ1130 0.62 0.10 0.14 0.63 0.11 0.14 26 or less 12 or less 80
Rubber Seal SQ1131 0.79 0.20 0.19 0.80 0.20 0.19 24 or less 15 or less 80
Double Metal Seal SQ1230D 0.62 0.10 0.14 0.63 0.11 0.14 13 or less 10 or less 95
Rubber Seal SQ1231D 0.79 0.20 0.19 0.80 0.20 0.19 20 or less 15 or less 95
3 Position Closed
Center 		Metal Seal SQ1330 0.58 0.12 0.14 0.63 0.11 0.14 44 or less 29 or less 100
Rubber Seal SQ1331 0.64 0.20 0.15 0.58 0.26 0.16 39 or less 25 or less 100
Exhaust
Center 		Metal Seal SQ1430 0.58 0.12 0.14 0.60 0.14 0.14 44 or less 29 or less 100
Rubber Seal SQ1431 0.64 0.20 0.15 0.80 0.20 0.19 39 or less 25 or less 100
Pressure
Center 		Metal Seal SQ1530 0.62 0.12 0.14 0.63 0.14 0.14 44 or less 29 or less 100
Rubber Seal SQ1531 0.79 0.21 0.19 0.59 0.20 0.14 39 or less 25 or less 100
4 Position Dual
3-Port Valve 		Rubber Seal SQ1A31 SQ1B31 SQ1C31 0.59 0.28 0.15 0.59 0.28 0.15 27 or less 14 or less 95

*1: Values for cylinder connection port diameter C6, CYL. → EXH. 2 → 3 (B → R2) is reduced approx. 30% compared to 4 → 5 (A → R1).
*2: Based on JIS B 8419:2010. (Value at supply pressure of 0.5 MPa and with light and surge voltage suppressor. The values may change depending on the pressure and air quality.)

Product JIS Symbol

JIS symbol for 2 position single

JIS symbol for 2 position single

JIS symbol for 3 position closed center

JIS symbol for 3 position closed center

JIS symbol for 4 position dual 3 port valve (B)

JIS symbol for 4 position dual 3 port valve (B)

With/Without Manifold Block

Without manifold block external appearance

Without manifold block external appearance

  • When ordering together with manifolds
  • When only valve is required
With manifold (built-in back pressure check valve) external appearance

With manifold (built-in back pressure check valve) external appearance

  • When adding stations

*Lead wire not included.

*The valve is a 4 port specification [5 (R1) and 3 (R2) are common]. As such, back pressure cannot be prevented within the same valve when using dual 3-port valves.

Manual Operation Method

Non-locking push type (tool required) external appearance

Non-locking push type (tool required) external appearance

Locking type (tool required) external appearance

Locking type (tool required) external appearance

Precautions

  • *When energizing valves for a long period of time, heat generated by the coil will cause the temperature to rise, decreasing valve performance, decreasing the lifespan and adversely affecting nearby peripheral equipment.
  • *When energizing a valve continuously, be sure to use the standard type (0.4 W) at an ambient temperature of 40°C or less and pay attention to discharging heat.
  • *Temperature increases are particularly high when simultaneously energizing 3 or more neighboring stations for a long-period continuously or when simultaneously energizing the A side and B side of a dual 3-port valve for an extended period.
  • Be sure to read the individual product cautions before use.
  • See the SMC catalog for product information other than that detailed above.

Elenco numeri di parte

Numero di articoli
  • 1
    • Codice componente
    SQ1330-51-C4-Q

    Applicazione

    Numero di attacchi

    Metodo di installazione

    Caratteristiche

    Numero di solenoidi

    A commutazione

    Stato allo spegnimento

    Tensione

    Tipo di attacco tubo

    Filettatura tubazione nominale

    Valore CV

    Diametro tubo di collegamento

    Con tenuta

    Pressione nominale

    (MPa)

    Mandata aria pilota

    Interruttore manuale

    Manuale

    Conformità CE

    Specifiche tubazioni

    Funzioni

    Valvola di controllo contropressione

    Specifiche comuni

    Raccordo di montaggio spina raccordo

    With/Without Manifold Block

    		Quantità minima d'ordine
    Unità di montaggio collettore
    Valvola a 5 porte
    Base collettore
    Standard / Senza lubrificazione
    Tipo doppio
    3 posizioni a centro chiuso
    Autoreset (ritorno molla)
    24 V DC
    Tubazioni ad attacco rapido
    -
    0.14
    Ø4
    Standard
    0.1–0.7
    Circuito
    Senza bloccaggio
    Non bloccabile, a pressione (con utensile)
    Sì
    Raccordo laterale
    Tipo standard (0.4W)
    Assente
    -
    Assente
    -
    1 pezzi
    Prezzo unitario (IVA esclusa)(Prezzo unitario IVA inclusa)
    Giorni spedizione standard
    106.06 €
    ( 126.21 € )
    26 giorni lavorativi
  • 1

    • Ulteriori informazioni

    Informazioni di base

    SMC Solenoid Valve.
    [Features]
    · Clip type one-touch fittings for easy replacement of fittings
    · The connector entry direction can be changed with a single push
    · 4 position, dual 3-port valve
    · Built-in back pressure check valve

    Attenzione

    • Le immagini dei prodotti possono essere rappresentative. Fare riferimento al catalogo del produttore per i dettagli.
    Il codice componente è stato confermato