JC, Giunto snodato, Tipo standard, leggero

JC, Giunto snodato, Tipo standard, leggero
[Features]
· Use of a lightweight aluminum case has reduced the weight by 30% (compared to JA40)
· Quality suitable for air cylinders
· Absorbs any misalignment between the workpiece and the cylinder
· Mounting is interchangeable with the current JA series

(i)Nota

  • Product images may be representative images. Refer to the catalog for details.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

JC Series Floating Joint, Light Weight Type For Light Load Specifications

JC Series Floating Joint external appearance

JC Series Floating Joint external appearance

JC Series Floating Joint operating range

JC Series Floating Joint operating range

Model Application
Cylinder tube
bore size (mm)
Compatible cylinder
nominal thread size
Maximum operating tension and compression force
(N)
Allowable eccentricity
U (mm)
Rotating angle
Basic type
Standard / Thread nominal size
JC20-8-125 20 M8 ×; 1.25 300 0.5 ±5 °
JC30-10-125 25, 32 M10 ×; 1.25 800 0.5
JC40-14-150 40 M14 ×; 1.5 1,250 0.75
JC63-18-150 50/63 M18 ×; 1.5 3,100 1
Semi-standard / Thread nominal size
JC20-8-100 20 M8 ×; 1 300 0.5 ±5 °
JC25-10-150 25 M10 ×; 1.5 800 0.5
JC32-10-100 32 M10 ×; 1 800 0.5
JC40-12-125 32/40 M12 ×; 1.25 1,250 0.75
JC40-12-150 40 M12 ×; 1.5 1,250 0.75
JC40-12-175 32/40 M12 ×; 1.75 1,250 0.75
JC50-16-150 50 M16 ×; 1.5 3,100 1
JC63-16-200 50/63 M16 ×; 2 3,100 1

(Standard Type / Pneumatic: Up to 1 MPa) Dimensions

 

(Unit: mm)

 

JC Series Floating Joint dimensional drawing

JC Series Floating Joint dimensional drawing

 
Model Application
cylinder bore size
M A B D E F G H Center of sphere
R
Maximum thread
depth
P
Allowable
eccentricity
U
Maximum operating tensile
and compressive force
N
Weight
kg
Nominal diameter Pitch
JC20-8-125 20 8 1.25 44 17.5 21 4.5 7 7 13 30.5 8 0.5 300 0.03
JC30-10-125 25/32 10 1.25 49.5 19.5 24 5 8 8 17 34 9 0.5 800 0.05
JC40-14-150 40 14 1.5 60 20 31 6 11 11 22 38 13 0.75 1,250 0.12
JC63-18-150 50/63 18 1.5 74.5 25 41 7.5 14 13.5 27 47.5 15 1 3,100 0.23

Diagram

JC Series Floating Joint Diagram

JC Series Floating Joint Diagram

Number Description Material Note
1 Stud Steel Manganese phosphate
2 Case Aluminum Chromate
3 Ring Steel -
4 Cap Steel Black zinc chromated
5 Dust cover Synthetic rubber -
6 Set screw Steel Zinc chromate
7 Rod end nut Steel Zinc chromate
8 Washer Steel -

Rod-end Nut (Accessory) dimensional drawing

 

(Unit: mm)

 

Rod-end nut dimensional drawing

Rod-end nut dimensional drawing

Model d: thread nominal size H B C
JC20-8-100 M8 ×; 1 5 13 15
JC20-8-125 M8 ×; 1.25 5 13 15
JC32-10-100 M10 ×; 1 6 17 19.6
JC30-10-125 M10 ×; 1.25 6 17 19.6
JC25-10-150 M10 ×; 1.5 6 17 19.6
JC40-12-125 M12 ×; 1.25 7 19 21.9
JC40-12-150 M12 ×; 1.5 7 19 21.9
JC40-12-175 M12 ×; 1.75 7 19 21.9
JC40-14-150 M14 ×; 1.5 8 22 25.4
JC50-16-150 M16 ×; 1.5 10 24 27.7
JC63-16-200 M16 ×; 2 10 24 27.7
JC63-18-150 M18 ×; 1.5 11 27 31.2

Precautions

  • *When screwing the male threads of the rod into the female threads of the socket or the case, make sure that the rod does not bottom out.
  • *The dust cover may stick to the stud. Move the dust cover at the base of the stud with your fingers, or twist the stud right and left gently to free it.
  • *When using a floating joint to connect the cylinder rod to a driven body, secure it in place by applying a torque that is appropriate for the thread size. Also, if there is a risk of loosening during operation, take measures to prevent loosening, such as using a locking pin or thread adhesive.
  • *This product is dedicated to linear motion. The threaded portion can be rotated, but this product is not a rotary joint. It cannot be used for rotational applications.
  • *Use the product at 25% or less of the allowable kinetic energy of the cylinder. *Be sure to use the cushion mechanism of the cylinder or a buffer mechanism such as a shock absorber to prevent impact force being applied to the floating joint when stopping the driven body. If there is no buffer mechanism, an impact force is generated that may cause the floating joint to exceed its maximum tensile and compressive force level, leading to breakage.
  • *Do not use if the product has been disassembled. High-strength adhesive is applied to the portion of the connection that is threaded to prevent it from loosening. The product must therefore not be disassembled. If the product is forcefully disassembled, it could lead to damage.
  • *See the manufacturer's catalog for product information other than the above.
Codice componente
JC20-8-100
JC20-8-125
JC25-10-150
JC30-10-125
JC32-10-100
JC40-12-125
JC40-12-150
JC40-12-175
JC40-14-150
JC50-16-150
JC63-16-200
JC63-18-150
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Filettatura di collegamento nominale M
(mm)
Filettatura di collegamento nominale p
(mm)
Max. Forza di trazione di esercizio
(kN)
Disallineamento U ammesso
(mm)
Dimensione foro applicabile
(ø)
Filettatura nominale cilindro applicabile

26.76 €

1 26 giorni M3–M81–1.750.30.520M8 × 1

26.76 €

1 4 giorni M3–M81–1.750.30.520M8 × 1.25

27.87 €

1 26 giorni M10–M181–1.750.80.525M10 × 1.5

27.87 €

1 4 giorni M10–M181–1.750.80.525/32M10 × 1.25

27.87 €

1 26 giorni M10–M181–1.750.80.532M10 × 1

35.69 €

1 26 giorni M10–M181–1.751.250.7532/40M12 × 1.25

35.69 €

1 26 giorni M10–M181–1.751.250.7540M12 × 1.5

35.69 €

1 26 giorni M10–M181–1.751.250.7532/40M12 × 1.75

36.81 €

1 4 giorni M10–M181–1.751.250.7540M14 × 1.5

50.18 €

1 4 giorni M10–M181–1.753.1150M16 × 1.5

50.18 €

1 26 giorni M10–M182–2.53.1150/63M16 × 2

51.31 €

1 4 giorni M10–M181–1.753.1150/63M18 × 1.5

Loading...

  1. 1

Informazioni di base

Tipo Giunti flottanti Cilindro usato Cilindro aria Tipo di attacco, lato cilindro Maschiati
Tipo di attacco, lato pezzo Filettature Materiale corpo principale Acciaio Testa metallica Non fornito
Materiale prigioniero Acciaio Gamma di temperature di esercizio(°C) -10::70 Disallineamento angolare V ammesso(deg) ±5

Supporto tecnico