ZH, eiettore per il vuoto, modello box / attacchi su corpo
· Lightweight and compact
· One-touch and screw-in connections can be combined
· Body can be mounted and secured
(i)Nota
- Le immagini del prodotto sono solo immagini rappresentative. Fare riferimento al catalogo del produttore per i dettagli sulle tipologie disponibili
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
ZH13BS-01-02
Box Type Vacuum Ejector (Built-In Silencer) ZH Series Specifications
Box type / B-type external appearance
Box Type (Built-In Silencer) ZH□□B Ejector display symbols
Box type (built-in silencer) structural drawing
| Model | Nozzle Diameter mm | Body Type | *Maximum Vacuum Pressure kPa | Maximum Suction Flow Rate L/min (ANR) | Air Consumption L/min (ANR) | Connection (One-touch/screw-in) | Weight (g) | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| S-Type | L-Type | S-Type | L-Type | S-type/L-type | SUP | VAC | EXH | ||||
| ZH05B□ | 0.5 | Box type (Built-in silencer) | -88 | -48 | 5 | 8 | 13 | ø6 mm, Rc 1/8 G 1/8 | ø6 mm, Rc 1/8 G 1/8 | - | 28 |
| ZH07B□ | 0.7 | 12 | 20 | 23 | 28 | ||||||
| ZH10B□ | 1.0 | 24 | 34 | 46 | 33 | ||||||
| ZH13B□ | 1.3 | 40 | 70 | 78 | ø8 mm, Rc 1/8 G 1/8 | ø10 mm, Rc 1/8 G 1/8 | 66 | ||||
*At a supply pressure of 0.45 MPa.
Fluid: air, Operating temperature: 5 to 50°C, Maximum operating pressure: 0.6 MPa, Standard supply pressure: 0.45 MPa
Box Type (Built-in Silencer) ZH□BS/L-□-□ dimensional drawing
(Unit: mm)
One-Touch Connection
One-touch connection dimensional drawing
| Model | A | øB | C | D | E | F | G | H |
|---|---|---|---|---|---|---|---|---|
| ZH05BS-06-06 | 60 | 6 | 22 | 16 | 16.8 | 28 | 5 | 47 |
| ZH05BL-06-06 | ||||||||
| ZH07BS-06-06 | ||||||||
| ZH07BL-06-06 | ||||||||
| ZH10BS-06-06 | 63 | 6 | 23 | 18 | 16.8 | 29 | 5 | 50 |
| ZH10BS-06-06 | ||||||||
| ZH13BS-08-10 | 78 | 8 | 27.5 | 23 | 18.7 | 35 | 7 | 61 |
| ZH13BS-08-10 |
| Model | I | J | øK | L | øM | øN | O | P |
|---|---|---|---|---|---|---|---|---|
| ZH05BS-06-06 | 57 | 16.8 | 3.2 | 24 | 6 | 5.8 | 2 | 31 |
| ZH05BL-06-06 | ||||||||
| ZH07BS-06-06 | ||||||||
| ZH07BL-06-06 | ||||||||
| ZH10BS-06-06 | 60 | 16.8 | 3.2 | 26 | 6 | 5.8 | 2 | 32 |
| ZH10BL-06-06 | ||||||||
| ZH13BS-08-10 | 75 | 21 | 4.2 | 28 | 10 | 7.5 | 3 | 38.5 |
| ZH13BL-08-10 |
One-Touch Connection + Screw-In Connection dimensional drawing
One-Touch Connection + Screw-In Connection dimensional drawing
| Model | A | øB | C | D | E | F | G | H |
|---|---|---|---|---|---|---|---|---|
| ZH05BS-06-01 | 60 | 6 | 29.5 | 16 | 16.8 | 28 | 5 | 47 |
| ZH05BL-06-01 | ||||||||
| ZH07BS-06-01 | ||||||||
| ZH07BL-06-01 | ||||||||
| ZH10BS-06-01 | 63 | 6 | 30.5 | 18 | 16.8 | 29 | 5 | 50 |
| ZH10BL-06-01 | ||||||||
| ZH13BS-08-02 | 78 | 8 | 38.5 | 23 | 18.7 | 35 | 7 | 61 |
| ZH13BL-08-02 | ||||||||
| ZH05BS-06-F01 | 60 | 6 | 29.5 | 16 | 16.8 | 28 | 5 | 47 |
| ZH05BL-06-F01 | ||||||||
| ZH07BS-06-F01 | ||||||||
| ZH07BL-06-F01 | ||||||||
| ZH10BS-06-F01 | 63 | 6 | 30.5 | 18 | 16.8 | 29 | 5 | 50 |
| ZH10BL-06-F01 | ||||||||
| ZH13BS-08-F02 | 78 | 8 | 39 | 23 | 18.7 | 35 | 7 | 61 |
| ZH13BL-08-F02 |
| Model | I | J | øK | L | M | øN | O | P |
|---|---|---|---|---|---|---|---|---|
| ZH05BS-06-01 | 57 | 12 | 3.2 | 24 | Rc 1/8 | 5.8 | 2 | 38.5 |
| ZH05BL-06-01 | ||||||||
| ZH07BS-06-01 | ||||||||
| ZH07BL-06-01 | ||||||||
| ZH10BS-06-01 | 60 | 12 | 3.2 | 26 | Rc 1/8 | 5.8 | 2 | 39.5 |
| ZH10BL-06-01 | ||||||||
| ZH13BS-08-02 | 75 | 17 | 4.2 | 28 | Rc 1/4 | 7.5 | 3 | 49.5 |
| ZH13BL-08-02 | ||||||||
| ZH05BS-06-F01 | 57 | 12 | 3.2 | 24 | G 1/8 | 5.8 | 2 | 38.5 |
| ZH05BL-06-F01 | ||||||||
| ZH07BS-06-F01 | ||||||||
| ZH07BL-06-F01 | ||||||||
| ZH10BS-06-F01 | 60 | 12 | 3.2 | 26 | G 1/8 | 5.8 | 2 | 39.5 |
| ZH10BL-06-F01 | ||||||||
| ZH13BS-08-F02 | 75 | 17 | 4.2 | 28 | G 1/4 | 7.5 | 3 | 50 |
| ZH13BL-08-F02 |
*Contact the manufacturer's support center for combinations other than those listed above.
Exhaust Characteristics / Flow Rate Characteristics
ZH05□S exhaust characteristics (left) / flow rate characteristics (right)
ZH05□L exhaust characteristics (left) / flow rate characteristics (right)
ZH07□S exhaust characteristics (left) / flow rate characteristics (right)
ZH07□L exhaust characteristics (left) / flow rate characteristics (right)
*Flow rate characteristics are with a supply pressure of 0.45 MPa.
How to Read Flow Rate Characteristics Graphs
Example flow rate characteristics
The flow rate characteristics show the relationship between the vacuum pressure and the suction flow rate of the ejector. It also shows that as the suction flow rate changes, so too does the vacuum pressure. Generally, the relationship shown is at the standard working pressure for the ejector.
In the diagram, Pmax denotes the maximum vacuum pressure, and Qmax denotes the maximum suction flow rate. These values are the values listed as the specifications in the manufacturer's catalog and elsewhere.
Changes in vacuum pressure are expressed in the order below.
- 1. When the ejector suction port is closed and sealed, the suction flow rate is 0 and the vacuum pressure is at its maximum (Pmax).
- 2. As the suction port is gradually opened and air begins to flow (leak), the suction flow rate increases and the vacuum pressure decreases. (State of P1 and Q1)
- 3. As the suction port opens further and on to the fully opened state, the suction flow rate reaches its maximum value (Qmax), and the vacuum pressure becomes close to 0 (atmospheric pressure). Thus, as the suction flow rate changes, so too does the vacuum pressure. In other words, if there is no leak in the vacuum port, the vacuum pressure will be at its highest level. As the leakage amount increases, the vacuum pressure decreases and becomes close to 0 when the leakage amount and the maximum suction flow rate become equal.
Be aware that when suctioning a workpiece that is breathable or has a leak, the vacuum pressure will not be very high.
Notes
- Mounting: Be careful not to apply an excessive load or generate moments to the ejector body via the connection port or by mounting.
- Exhaust piping: On the ZH□□B□ models, keep exhaust ports open on at least one side.
- Selection and sizing: Refer to the manufacturer's catalog for information on how to select vacuum equipment models.
- *Refer to the manufacturer's catalog for product information not detailed above.
Codice componente
|
|---|
| ZH13BS-01-02 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | |
|---|---|---|---|---|
48.38 € | 1 | 98 giorni |
Loading...
Informazioni di base
| Tipo | Unità | Funzione aggiuntiva | Silenziatori | Vuoto finale(kPa) | -88 |
|---|---|---|---|---|---|
| Portata consumo di aria(L/min) | 78 | Profilo attacco di collegamento apertura vuoto | Rc1/4 | Profilo attacco di collegamento porta di mandata aria | Rc1/8 |
| Applicazione | Elemento singolo | Gamma di pressioni d'esercizio(MPa) | 0.45::0.6 | Gamma di temperature di esercizio(°C) | 5:50:: |
| Flusso di aspirazione(L/min) | 40 | Diam. ugello | 1.3mm |
Si trova sulla pagina di ZH, eiettore per il vuoto, modello box / attacchi su corpo, il codice articolo è il seguente: ZH13BS-01-02.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto ZH13BS-01-02.
Configura
Proprietà di base
-
Tipo
- ZH13
-
Filtrare per tipo dati CAD
- 2D
- 3D
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 98 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.