- Tipo
- Corpo principale
- Corpo principale
- Tipo di presa
- Numero di dita di presa
- Profilo corpo principale
- Metodo di funzionamento
- Dimensioni in apertura(mm)
- 20.6
- Dimensioni in chiusura(mm)
- 14.6
- Forza di presa (con chiusura a 0.5Mpa)(N)
- 23
- Ambiente, applicazioni
- Funzione aggiuntiva
- Meccanismo di regolazione corsa
- Diametro interno cilindro(mm)
- 16
- Interruttore automatico
- Numero di interruttori
- Lunghezza filo conduttore
- Specifiche su ordinazione
- Tipo di connettore per apertura / chiusura pinza
- Materiale copertura antipolvere
- Specifiche
- Materiali nottolino
- Tipo
- CAD
- 2D
- 3D
- Giorni di spedizione est.
- Tutti
- Entro 26 giorni lavorativi
MHK, pinza pneumatica, guida su bronzine con azionamento su piano inclinato (MHK2-16SF)
Informazioni sul prodotto
MHK2 Series 2-Finger Type Wedge Cam Operation Slide Guide Air Gripper Features
| Fluid | Air | ||
|---|---|---|---|
| Operating pressure | Double acting | 0.1 to 0.6 MPa | |
| Single acting | Normally open | 0.25 to 0.6 MPa | |
| Normally closed | |||
| Ambient and fluid temperature | -10 to +60°C | ||
| Repeatability | ±0.01 mm | ||
| Lubrication | Non-lube | ||
| Action | Double acting / single acting | ||
| Auto switch (option) * | Solid state auto switch (3-wire, 2-wire) | ||
*See pp. 797–850 in the manufacturer's catalog for detailed specifications of auto switches.
Model
| Model | Action | Cylinder inner diameter mm | Maximum operating frequency c.p.m | Effective gripping force per finger *1 N | Opening/closing stroke mm (L2-L1) | Width at closing mm (L1) | Width at opening mm (L2) | Weight g | |
|---|---|---|---|---|---|---|---|---|---|
| MHK2-12D□ | Double acting | 12 | 120 | Outer-diameter grip: 15 Inner-diameter grip: 16 | 4 | 9 | 13 | 75 | |
| MHK2-16D□ | 16 | Outer-diameter grip: 31 Inner-diameter grip: 36 | 6 | 14.6 | 20.6 | 113 | |||
| MHK2-20D□ | 20 | Outer-diameter grip: 31 Inner-diameter grip: 56 | 10 | 16 | 26 | 235 | |||
| MHK2-25D□ | 25 | Outer-diameter grip: 80 Inner-diameter grip: 86 | 14 | 19 | 33 | 440 | |||
| MHK2-12S□ | Single acting | Normally open | 12 | 9 | 4 | 9 | 13 | 76 | |
| MHK2-16S□ | 16 | 23 | 6 | 14.6 | 20.6 | 114 | |||
| MHK2-20S□ | 20 | 34 | 10 | 16 | 26 | 237 | |||
| MHK2-25S□ | 25 | 58 | 14 | 19 | 33 | 443 | |||
| MHK2-12C□ | Normally closed | 12 | 12 | 4 | 9 | 13 | 76 | ||
| MHK2-16C□ | 16 | 25 | 6 | 14.6 | 20.6 | 115 | |||
| MHK2-20C□ | 20 | 44 | 10 | 16 | 26 | 237 | |||
| MHK2-25C□ | 25 | 73 | 14 | 19 | 33 | 443 | |||
*1 Values based on pressure of 0.5 MPa, gripping point L = 20 mm.
For the single acting normally open type, the outer-diameter gripping force applies. For the single acting normally closed type, the inner-diameter gripping force applies.
For the gripping force at each gripping point, refer to the data in "Gripping Point and Effective Gripping Force" on pp. 553–557 of the manufacturer's catalog.
Structure drawing
Double acting
Fingers open structure drawing
Fingers closed structure drawing
Single acting
Normally open structure drawing
Normally closed structure drawing
Component parts
| No. | Description | Material | Note |
|---|---|---|---|
| 1 | Body | Aluminum alloy | Hard anodizing |
| 2 | Piston | Aluminum alloy | Hard anodizing |
| 3 | Cam | Carbon steel | Heat treated, specially treated |
| 4 | Finger | Carbon steel | Heat treated, specially treated |
| Stainless steel SUS304 | Option | ||
| 5 | Cap | Aluminum alloy | Hard anodizing |
| 6 | Piston bolt | Stainless steel | - |
| 7 | Rubber magnet | Synthetic rubber | - |
| 8 | Needle ass’y | - | - |
| 9 | N.O. spring | Piano wire | - |
| 10 | Plug | Brass | Electroless nickel plating |
| 11 | Exhaust plug | Brass | Electroless nickel plating |
| 12 | N.C. spring | Piano wire | - |
| 13 | Plug ass’y | Brass | Electroless nickel plating |
| 14 | Exhaust plug A | Brass | Electroless nickel plating |
| 15 | Type C retaining ring | Carbon steel | Nickel plating |
MHK2 Replacement Parts
| Part name | MHK2-12□ | MHK2-16□ | MHK2-20□ | MHK2-25□ | Main parts | ||
|---|---|---|---|---|---|---|---|
| Gasket set | MHK12-PS | MHK16-PS | MHK20-PS | MHK25-PS | (16) (17) (18) (19) | ||
| Piston ass’y | MHK-A1201 | MHK-A1601 | MHK-A2001 | MHK-A2501 | (2) (6) (7) | ||
| Cam | P3318103 | P3318203 | P3318303 | P3318403 | (3) | ||
| Finger | Material | Carbon steel | P3318104 | P3318204 | P3318304 | P3318404 | (4) |
| Stainless steel | P3318104-1 | P3318204-1 | P3318304-1 | P3318404-1 | |||
| Needle ass’y | MHK-A1206 | (8) | |||||
| Dust cover | Material | CR | MHK2-J12 | MHK2-J16 | MHK2-J20 | MHK2-J25 | (20) |
| FKM | MHK2-J12F | MHK2-J16F | MHK2-J20F | MHK2-J25F | |||
| Silicone rubber | MHK2-J12S | MHK2-J16S | MHK2-J20S | MHK2-J25S | |||
- *Order 2 pieces per finger unit.
Replacement part / grease pack part number: MH-G01 (30 g)
External dimensional drawing
(Unit: mm)
MHK2-12□ / standard type external dimensional drawing
*In the case of single acting, one side port is a breathing hole. The finger speed adjustment needle is a plug.
(Unit: mm)
Groove position for auto switch mounting
(Unit: mm)
MHK2-16□ / standard type external dimensional drawing
*In the case of single acting, one side port is a breathing hole. The finger speed adjustment needle is a plug.
(Unit: mm)
Groove position for auto switch mounting
(Unit: mm)
MHK2-20□ / standard type external dimensional drawing
*In the case of single acting, one side port is a breathing hole. The finger speed adjustment needle is a plug.
(Unit: mm)
Groove position for auto switch mounting
- *For other specifications and dimensions, refer to the manufacturer's catalog.
Ulteriori informazioni
Informazioni di base
The wedge cam structure enables high-precision and high-rigidity.
Features a dust cover for improved load resistance and resistance to adverse environments.
[Features]
· Can be equipped with an auto switch.
· Includes a pinhole on the top surface for positioning.
· Features a built-in adjustment needle for adjusting the finger speed.
· High repeatability: ±0.01 mm.
· 2 types of finger material are available for use in different applications.
· 3 types of dust cover are available for use in different applications.
· Long stroke type now as standard.
Attenzione
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.