MHCM2, pinza pneumatica, tipo apertura a fulcro, tipo piccolo

MHCM2, pinza pneumatica, tipo apertura a fulcro, tipo piccolo

Dettagli del prodotto:

Codice articolo del costruttore: MHCM2-7S

Marca: SMC

Prezzo: 138.29

Tempi di consegna: 4 giorni


Dati Tecnici:

Specifiche su ordinazione: Assente


(i)Nota

  • Refer to the catalog for details on product specifications.
  • Product images may be representative. Refer to the manufacturer's catalog for details.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

MHCM2-7S

Angular Type Air Chuck, Compact Type, MHCM2-7S Series Specifications

MHCM2-7S Series JIS symbol (single acting normally open, external gripping)

MHCM2-7S Series JIS symbol (single acting normally open, external gripping)

Applicable fluids Air
Operating pressure 0.4 to 0.6 MPa
Ambient temperature and working fluid temperature -10 to +60°C
Repeat accuracy ±0.02 mm
Maximum operating frequency 180 c.p.m.
Lubrication Non-lube
Operating method Single acting (normally open)

Outline dimensional drawing

 

(Unit: mm)

 

MHCM2-7S dimensional drawing

MHCM2-7S dimensional drawing

Structural drawing

Single acting type / open condition structure drawing

Single acting type / open condition structure drawing

Closed condition structure drawing

Closed condition structure drawing

Component parts

Number Part name Material Note
1 Body Aluminum Alloy Hard anodizing
2 Finger Stainless steel Heat treated
3 Piston Stainless steel Heat treated
4 Pusher Stainless steel -
5 Spring Piano wire Zinc chromate
6 Needle roller High carbon chrome bearing steel -
7 Piston Gasket NBR -

Effective Gripping Force

Expressing the effective gripping force

The effective gripping force shown in the graphs below is expressed as F, which is the thrust of one finger when both fingers and attachments are in full contact with the workpiece as shown in the figure below.

Finger thrust: F diagram

Finger thrust: F diagram

L: Gripping point length dimensional drawing (external gripping)

L: Gripping point length dimensional drawing (external gripping)

Effective gripping force graph

Effective gripping force graph

*If there is an overhang, please consult with the manufacturer.

Precautions

Mounting

  1. *1Tighten the screw within the specified torque range when mounting the air chuck.
    Tightening with a torque above the limit can cause malfunction, while insufficient tightening can cause slippage and dropping.
  2. *2Do not scratch or dent the air chuck by dropping or bumping it when mounting.
    Even slight deformation can cause the deterioration of accuracy and operation failure.
  3. *3Tighten the screw within the specified torque range when mounting the attachment.
    Tightening with a torque above the limit can cause malfunction, while insufficient tightening can cause slippage and dropping.

Other precautions

  • *Note the risk of corrosion on the finger. Except for certain models, the finger uses martensitic stainless steel, whose corrosion resistance is inferior to austenitic stainless steel. In particular, rust may occur in environments where water droplets adhere to the unit due to condensation.
  • *See the manufacturer's catalog for product information other than the above.
Codice componente
MHCM2-7S
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Specifiche su ordinazione

138.29 €

1 4 giorni Assente

Loading...

  1. 1

Informazioni di base

Tipo Corpo principale Tipo di presa Presa a pinza, orientabile Numero di dita di presa 2 pz.
Profilo corpo principale Profilo quadrato Metodo di funzionamento Ad azione singola (Normalmente aperto) Forza di presa (con chiusura a 0.5Mpa)(N) 1.2
Ambiente, applicazioni Standard Funzione aggiuntiva Non in dotazione Meccanismo di regolazione corsa Non in dotazione
Diametro interno cilindro(mm) 7

Si trova sulla pagina di MHCM2, pinza pneumatica, tipo apertura a fulcro, tipo piccolo, il codice articolo è il seguente: MHCM2-7S.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto MHCM2-7S.

Tipologia prodotto

Codice componente
MHCM2-7S-X4
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?
Specifiche su ordinazione

161.05 €

1 26 giorni Termoresistenza (100°C)

Supporto tecnico