• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

AS*1F-T, regolatore di flusso, anti manomissione (AS1211F-M5-06T)

AS*1F-T, regolatore di flusso, anti manomissione AS1211F-M5-06T
  • In Offerta fino al 30/11/2024

SMC

SMC

Dettagli del prodotto:

Codice articolo del costruttore: AS1211F-M5-06T

Marca: SMC

Prezzo: 8.61 €

Tempi di consegna: 26 giorni


Dati Tecnici:

Profilo corpo principale: [Gomito] Gomito

Metodo di controllo: Misurazione - Ingresso

Temperature ambiente e fluido: -5～ 60 °C

Gamma di pressioni d'esercizio: 0.1～ 1.0 MPa

Portata: 100 L/min


(i)Nota

  • ■ SMC Product Line
    Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
    Click here for a quotation or to make an order if you have a model number.

    ■ Products Planned for Online Release
    Air cylinder-related product pages will be released on this site on an ad-hoc basis.
    CQ2, MG types, etc., are already available. Click here to check.
    *Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
    *The information above is correct as of December 2018.
  • See catalog for specification details.
  • Product images may be representative images. Refer to the manufacturer's catalog for shape details.

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

AS1211F-M5-06T

Tamper Proof Speed Controller With One-Touch Fitting, Elbow Type / Universal Type, AS□□□1F-T Series Specifications

AS□□□1F-T Series Elbow Type external appearance

AS□□□1F-T Series Elbow Type external appearance

AS□□□1F-T Series Universal Type external appearance

AS□□□1F-T Series Universal Type external appearance

AS□□□1F-T Series JIS symbol

AS□□□1F-T Series JIS symbol

Flow Rate and Sonic Conductance

Model AS12□1F
AS13□1F 		AS22□1F-□01
AS23□1F-□01
Tube outer diameter Metric Size øø3.2 (diameter 3.2 mm), ø4 (diameter 4 mm), ø6 (diameter 6 mm) øø3.2 (diameter 3.2 mm), ø4 (diameter 4 mm) øø6 (diameter 6 mm), ø8 (diameter 8 mm), ø10 (diameter 10 mm)
Inch Size øø1/8" (diameter 1/8 inch), ø5/32" (diameter 5/32 inch)
øø3/16" (diameter 3/16"), ø1/4" (diameter 1/4") 		øø1/8" (diameter 1/8 inch), ø5/32" (diameter 5/32 inch) øø3/16" (diameter 3/16 inch), ø1/4" (diameter 1/4 inch), ø5/16" (diameter 5/16 inch)
Controlled flow
Free flow 		Flow rate L/min (ANR) 100 180 230
Sonic conductance
dm3/(s·bar) 		0.3 0.54 0.7
Critical pressure ratio Controlled flow 0.2 0.25
Free flow 0.4 0.2
Model AS22□1F-□02
AS23□1F-□02 		AS32□1F
AS33□1F 		AS42□1F
AS43□1F
Tube outer diameter Metric Size øø4 (diameter 4 mm) øø6 (diameter 6 mm) øø8 (diameter 8 mm), ø10 (diameter 10 mm) øø6 (diameter 6 mm) øø8 (diameter 8 mm) øø10 (diameter 10 mm), ø12 (diameter 12 mm) øø10 (diameter 10 mm) ø12 (diameter 12 mm)
Inch Size øø5/32" (diameter 5/32 inch) øø3/16" (diameter 3/16") øø1/4" (diameter 1/4 inch), ø5/16" (diameter 5/16 inch), ø3/8" (diameter 3/8 inch) øø1/4" (diameter 1/4 inch) øø5/16" (diameter 5/16 inch) øø3/8" (diameter 3/8 inch) øø3/8" (diameter 3/8 inch) øø1/2" (diameter 1/2 inch)
Controlled flow
Free flow 		Flow rate L/min (ANR) 260 390 460 660 790 920 1,580 1,710
Sonic conductance
dm3/(s·bar) 		0.8 1.2 1.4 2 2.4 2.8 4.8 5.2
Critical pressure ratio Controlled flow 0.3 0.25 0.25
Free flow 0.3 0.2 0.3

*1: Flow rate at a pressure of 0.5 MPa and a temperature of 20°C.

Structure drawing

Elbow Type

Meter-out type structure drawing

Meter-out type structure drawing

M5 type and U10/32 type structure drawing

M5 type and U10/32 type structure drawing

Meter-in type structure drawing

Meter-in type structure drawing

Number Description Material Note
1 Body A PBT -
2 Body B Brass Electroless nickel plated
3 Needle Brass Electroless nickel plated
4 Seat ring Brass Electroless nickel plated
5 Spring *1Steel wire -
6 U seal HNBR -
7 Cassette - -
8 Seal NBR -
9 O-ring NBR -
10 O-ring NBR -
11 O-ring NBR -
12 O-ring NBR -
13 Gasket NBR / stainless steel -
14 C type retaining ring for hole Tool steel -

*1: Stainless steel for M5 and U10/32 types only.

Universal Type

Meter-out type structure drawing

Meter-out type structure drawing

M5 type and U10/32 type structure drawing

M5 type and U10/32 type structure drawing

Meter-in type structure drawing

Meter-in type structure drawing

Number Description Material Note
1 Body A PBT -
2 Elbow body PBT -
3 Body B Brass Electroless nickel plated
4 Needle Brass Electroless nickel plated
5 Seat ring Brass Electroless nickel plated
6 Spring *1Steel wire -
7 U seal HNBR -
8 Cassette - -
9 Seal NBR -
10 O-ring NBR -
11 O-ring NBR -
12 O-ring NBR -
13 O-ring NBR -
14 O-ring NBR -
15 Spacer - -
16 Gasket NBR / stainless steel -
17 C type retaining ring for hole Tool steel -

*1: Stainless steel for M5 and U10/32 types only.

Drawings

Elbow Type

AS□□□1F-T Series, Elbow Type dimensional drawing

AS□□□1F-T Series, Elbow Type dimensional drawing

Dimensions for metric sizes

 

(Units: mm)

 

Model d T H D1 D2 D3 L1 L2 L3 L4 L5 A* M1 Weight (g)
AS12□1F-M5-23T 3.2 M5 ×; 0.8 8 8.4 9.6 4.5 17.3 22.1 12.3 31 0.7 27.4 12.7 10
AS12□1F-M5-04T 4 9.3
AS12□1F-M5-06T 6 11.6 18.1 22.9 11.7 13.5
AS22□1F-01-23ST 3.2 R 1/8 12 8.4 14.2 7 20.4 27.5 13.4 34.7 1.5 31.6 12.7 20
AS22□1F-01-04ST 4 9.3 21
AS22□1F-01-06ST 6 11.6 13.5
AS22□1F-01-08ST 8 15.2 25.3 32.4 18.5 23
AS22□1F-01-10ST 10 18.5 33.1 40.2 15.3 21 25
AS22□1F-02-04ST 4 R 1/4 17 10.4 18.5 7 25.2 34.4 17.7 40.2 1.5 34.7 16 40
AS22□1F-02-06ST 6 12.8 17
AS22□1F-02-08ST 8 15.2 27.2 36.4 18.5 42
AS22□1F-02-10ST 10 18.5 35.3 44.5 18.3 21 44
AS32□1F-02-06ST 6 R 1/4 19 12.8 23 9.5 27.8 39.3 21.3 54.8 1.5 49.3 17 73
AS32□1F-02-08ST 8 15.2 29.5 41 18.5 76
AS32□1F-02-10ST 10 18.5 31.8 43.3 21 80
AS32□1F-02-12ST 12 20.9 32.8 44.3 22 82
AS32□1F-03-06ST 6 R 3/8 19 12.8 23 9.5 27.8 39.3 19.8 52.6 1.5 47.4 17 77
AS32□1F-03-08ST 8 15.2 29.5 41 18.5 79
AS32□1F-03-10ST 10 18.5 31.8 43.3 21 81
AS32□1F-03-12ST 12 20.9 32.8 44.3 22 83
AS42□1F-04-10ST 10 R 1/2 24 18.5 28.6 12 33.6 47.9 24.5 62.9 1.5 55.8 21 141
AS42□1F-04-12ST 12 20.9 35.2 49.5 22 142

*Reference dimensions of M5 ×; 0.8 and R thread after installation

Precautions

  • *Prior to use, always refer to the manufacturer's catalog on safety precautions as well as drive control equipment and common precautions.
  • *The images are representative images. The appearance may differ from the actual product.
  • *See the manufacturer's catalog for information other than the above.
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
AS1211F-M5-06T
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Profilo corpo principale Metodo di controllo Temperature ambiente e fluido
(°C) 		Gamma di pressioni d'esercizio
(MPa) 		Portata
(L/min) 		Connection Dia. Option Types of Screw Applicable Tube O.D. mm
(mm) 		Applicable Tube O.D. inch size
(inch) 		Body Size Specifiche su ordinazione

8.61 €

1 26 giorni [Gomito] GomitoMisurazione - Ingresso-5～ 600.1～ 1.01005 × 0.8Senza guarnizioneM6-M5 standardAssente

Loading...

  1. 1
 

Informazioni di base

Tipo Regolatore di velocità Tipo giunto Filettatura maschio + attacchi a innesto rapido Materiale corpo principale PBT/ottone + nichelatura chimica
Ambiente d'esercizio, applicazioni Standard Materiale filettatura Acciaio inox (EN 1.4305 Equiv.) Con manopola Antimanomissione
Opzione controdado blocco a forma dado

Si trova sulla pagina di AS*1F-T, regolatore di flusso, anti manomissione, il codice articolo è il seguente: AS1211F-M5-06T.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto AS1211F-M5-06T.

Configura

Ripristina

1Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Applicable Tube O.D. inch size(inch)

    • 1/2
    • 1/4
    • 1/8
    • 3/8
    • 5/16
    • 5/32

    Ripristina

  • Tipo

    • AS1□□1F
    • AS2□□1F
    • AS3□□1F
    • AS4□□1F

    Ripristina

  • Profilo corpo principale

    • Gomito
      • Gomito
    • Universale

    Ripristina

  • Metodo di controllo

    • Misurazione - Ingresso
    • Misurazione - Uscita

    Ripristina

  • Connection Dia.

    • 1/2
    • 1/4
    • 1/8
    • 3/8
    • 5 × 0.8
    • 10-32

    Ripristina

  • Option

    • Con guarnizione
    • Senza guarnizione

    Ripristina

  • Types of Screw

    • M
    • NPT
    • R
    • UNF

    Ripristina

  • Applicable Tube O.D. mm(mm)

    • 3.2
    • 4
    • 6
    • 8
    • 10
    • 12

    Ripristina

  • Body Size

    • 1/2 standard
    • 1/8, 1/4 standard
    • 3/8 standard
    • M5 standard

    Ripristina

  • Specifiche su ordinazione

    • Assente
    • Senza grasso (guarnizione con rivestimento al fluoro) + valvola a farfalla (nessuna valvola di ritegno)
    • Throttle valve (no check valve)

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • Stesso giorno
    • 4 giorni o meno
    • 22 giorni o meno
    • 26 giorni o meno

    Ripristina

Attributi opzionali

Tipologia prodotto

Codice componente
AS1201F-M5-23T
AS1201F-U10/32-07T
AS1211F-M5-04T
AS1211F-M5-23T
AS1211F-U10/32-01T
AS1211F-U10/32-03T
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?		Profilo corpo principale Metodo di controllo Temperature ambiente e fluido
(°C) 		Gamma di pressioni d'esercizio
(MPa) 		Portata
(L/min) 		Connection Dia. Option Types of Screw Applicable Tube O.D. mm
(mm) 		Applicable Tube O.D. inch size
(inch) 		Body Size Specifiche su ordinazione

8.85 €

1 26 giorni [Gomito] GomitoMisurazione - Uscita-5～ 600.1～ 1.01005 × 0.8Senza guarnizioneM3.2-M5 standardAssente

8.69 €

1 26 giorni [Gomito] GomitoMisurazione - Uscita-5～ 600.1～ 1.010010-32Senza guarnizioneUNF-1/4M5 standardAssente

8.61 €

1 4 giorni [Gomito] GomitoMisurazione - Ingresso-5～600.1～1.01005 × 0.8Senza guarnizioneM4-M5 standardAssente

8.84 €

1 26 giorni [Gomito] GomitoMisurazione - Ingresso-5～ 600.1～ 1.01005 × 0.8Senza guarnizioneM3.2-M5 standardAssente

8.56 €

1 26 giorni [Gomito] GomitoMisurazione - Ingresso-5～ 600.1～ 1.010010-32Senza guarnizioneUNF-1/8M5 standardAssente

8.98 €

1 26 giorni [Gomito] GomitoMisurazione - Ingresso-5～ 600.1～ 1.010010-32Senza guarnizioneUNF-5/32M5 standardAssente

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.