Interruttore automatico a stato solido, stile con attacco diretto, D-M9N(V) / D-M9P(V) / D-M9B(V) (D-M9NSAPC)

Interruttore automatico a stato solido, stile con attacco diretto, D-M9N(V) / D-M9P(V) / D-M9B(V) D-M9NSAPC
  • In Offerta fino al 30/11/2024

Dettagli del prodotto:

Codice articolo del costruttore: D-M9NSAPC

Marca: SMC

Prezzo: 40.16

Tempi di consegna: Stesso giorno


Dati Tecnici:

Tipo cablaggio: A 3 fili

Tipo di uscita: Tipo NPN

Direzione ingresso elettrico: In linea

Lunghezza filo conduttore: 0.5 m

Tipo di connettore: M8-3 Poli


(i)Nota

  • ■ SMC Air Cylinder Product Selection and Technical Information
    The featured products page can be found here.

    ■ SMC Product Line
    Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
    Click here for a quotation or to make an order if you have a model number.
  • Refer to the manufacturer's catalog for specification and material details.
  • Product images may be representative images. Refer to the manufacturer's catalog for shape details.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

D-M9NSAPC

Solid State Switch, Direct Mounting Style, D-M9N(V)/D-M9P(V)/D-M9B(V) Specifications

• Lower load current
• Lead free solder
• Using UL certified (style 2844) lead wire

Auto Switch Specifications

D-M9□, D-M9□V (With indicator light)
Auto switch modelD-M9ND-M9NVD-M9PD-M9PVD-M9BD-M9BV
Electrical entry directionIn-linePerpendicularIn-linePerpendicularIn-linePerpendicular
Wiring type3-wire2-wire
Output typeNPNPNP-
Applicable loadIC circuit, Relay, PLC24 VDC relay, PLC
Power supply voltage5, 12, 24 VDC (4.5 to 28 V)-
Current consumption10 mA or less-
Load voltage28 VDC or less-24 VDC (10 to 28 VDC)
Load current40 mA or less2.5 to 40 mA
Internal voltage drop0.8 V or less4 V or less
Leakage current100 μA or less at 24 VDC0.8 mA or less
Indicator lightRed LED lights when ON.
Lead wire — Oil resistant vinyl heavy-duty cord, ø2.7 x 3.2 ellipse 0.15 mm2, 2 cores (D-M9B), 3 cores (D-M9N, D-M9P)
Note 1) Regarding the common specifications of the solid-state switches, refer to catalog.
Note 2) Regarding the lead wire length, refer to page catalog.

Dimensions

D-M9□
D-M9□V

Auto Switch Internal Circuit

D-M9N, D-M9NV
D-M9P, D-M9PV
D-M9B, D-M9BV
Operating range shortened, compared to conventional types.
When replacing conventional types, dependant upon application, the shortened operating range may cause auto switch imperceptive.
• When the range of stroke is wider than the operating range. Example) Stamping, press-fitting, clamping, etc.
• When used to detect intermediate position. (Detection output time is shortened.)
Note) Please consult with SMC regarding details of operation range by each actuator.

Since short circuit protection circuit is not built-in, the auto switch will be immediately damaged when the load is short-circuited. Be careful not to exchange the power cable (brown) with the output cable (black).

Caution

  • Over-current protection is not equipped with this product series. When it is wired incorrectly or a load is short-circuited, a switch may be damaged or burned.
  • In the event of stripping cable sheath, use caution for the stripping direction. Its insulation may be torn or damaged, depending on the direction.
  • Below is given as the recommended tool.
    MakerProduct’s namePart no.
    VESSEL Co., Inc.Wire stripperNo 3000G
    Tokyo Ideal Co., Ltd.Stripmaster45-089
    As for 2-wire, a stripper for round shape cord (ø2.0) is usable.
  • Fix the switch with appropriate screw installed on the switch body. If using other screws, switch may be damaged.
Codice componente
D-M9NSAPC
Codice componenteRelativo a
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Tipo cablaggio Tipo di uscita Direzione ingresso elettrico Lunghezza filo conduttore
(m)
Tipo di connettore
-

40.16 €

28.11 €

1 Stesso giorno

Stock

A 3 filiTipo NPNIn linea0.5M8-3 Poli

Loading...

  1. 1

Si trova sulla pagina di Interruttore automatico a stato solido, stile con attacco diretto, D-M9N(V) / D-M9P(V) / D-M9B(V), il codice articolo è il seguente: D-M9NSAPC.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto D-M9NSAPC.

Tipologia prodotto

Codice componente
D-M9BMAPC
D-M9BMBPC
D-M9BMDPC
D-M9NSBPC
D-M9NSDPC
D-M9NV
Codice componenteRelativo a Prezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?
Tipo cablaggio Tipo di uscita Direzione ingresso elettrico Lunghezza filo conduttore
(m)
Tipo di connettore
-

40.89 €

1 26 giorni A 2 filiAssenteIn linea1M8 3 pin
-

40.89 €

1 98 giorni A 2 filiAssenteIn linea1M8 4 pin
-

40.89 €

1 26 giorni A 2 filiAssenteIn linea1M12 4 pin
-

40.16 €

1 26 giorni A 3 filiTipo NPNIn linea0.5M8 4 pin
-

40.16 €

1 26 giorni A 3 filiTipo NPNIn linea0.5M12 4 pin

35.68 €

1 7 giorni A 3 filiTipo NPNPerpendicolare0.5Assente

Supporto tecnico