Griffa morbida HO1MA (per HOWA)【2-3 Pezzi per confezione】
· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
| Codice componente |
Prezzo unitario standard
| Numero di pz. inclusi per conf. | Quantità minima d'ordine | Sconto volumi elevati | Details Type | Chuck diameter (Inch) | Pitch (mm) | Height (mm) | Length (mm) | Width (mm) | Trusco Code | Mass (g/group) | Features | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
54.72 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 4 | 1.5 | 25 | 54 | 23 | 114-0574 | 600 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
55.15 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 5 | 1.5 | 25 | 58.5 | 23 | 114-0582 | 650 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
69.92 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 6 | 1.5 | 40 | 72 | 31 | 114-0591 | 1700 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
69.92 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 6 | 3 | 40 | 72 | 31 | 114-0604 | 1700 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
82.42 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 8 | 1.5 | 40 | 90 | 34 | 114-0612 | 2300 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
82.42 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 8 | 3 | 40 | 90 | 34 | 114-0621 | 2300 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
107.92 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 10 | 1.5 | 40 | 110 | 40 | 114-0639 | 3500 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
107.92 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 10 | 3 | 40 | 110 | 40 | 114-0647 | 3500 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
169.47 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 12 | 1.5 | 50 | 129 | 50 | 114-0655 | 6700 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
169.47 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 12 | 3 | 50 | 129 | 50 | 114-0663 | 6700 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
303.76 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | For HO1MA | 15 | 3 | 70 | 156 | 64 | 114-0671 | 13600 | S45C steel, which can be easily cut for modification and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw. | ||
71.79 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 6 | 1.5 | 30 | 70.5 | 30 | 114-0787 | 1200 | - | ||
91.35 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 8 | 1.5 | 35 | 90 | 32 | 114-0795 | 1900 | - | ||
140.83 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 8 | 1.5 | 60 | 90 | 32 | 112-9571 | 3300 | - | ||
149.82 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 8 | 1.5 | 90 | 90 | 32 | 112-9589 | 5400 | - | ||
114.66 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 10 | 1.5 | 40 | 90 | 35 | 114-0809 | 2400 | - | ||
137.20 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 10 | 1.5 | 60 | 90 | 35 | 112-9597 | 3600 | - | ||
188.61 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 10 | 1.5 | 90 | 90 | 35 | 112-9601 | 5300 | - | ||
190.27 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 12 | 1.5 | 50 | 105 | 40 | 114-0817 | 4200 | - | ||
72.84 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 6 | 1.5 | 30 | 70.5 | 30 | 114-0833 | 1200 | - | ||
117.07 € | 3 Pezzi per confezione | 1 conf. | 10 giorni | - | 8 | 1.5 | 40 | 90 | 35 | 114-0841 | 2400 | - | ||
56.04 € | 2 Pezzi per confezione | 1 conf. | 6 giorni | - | 6 | 1.5 | 30 | 70.5 | 30 | 114-0680 | 840 | - | ||
88.56 € | 2 Pezzi per confezione | 1 conf. | 6 giorni | - | 8 | 1.5 | 40 | 90 | 35 | 114-0698 | 1670 | - | ||
146.28 € | 2 Pezzi per confezione | 1 conf. | 6 giorni | - | 10 | 1.5 | 50 | 105 | 40 | 114-0701 | 2780 | - | ||
88.30 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 6 | 1.5 | 35 | 66.5 | 35 | 114-0868 | 1500 | - | ||
106.88 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 8 | 1.5 | 40 | 85.5 | 40 | 114-0876 | 2500 | - | ||
158.79 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 10 | 1.5 | 45 | 108 | 45 | 114-0884 | 4300 | - | ||
141.78 € | 3 Pezzi per confezione | 1 conf. | 6 giorni | - | 12 | 1.5 | 60 | 111 | 50 | 114-0892 | 6400 | - |
Loading...
Configura
Proprietà di base
-
Details Type
- For HO1MA
-
Chuck diameter(Inch)
-
Pitch(mm)
- 1.5
- 3
-
Height(mm)
-
Length(mm)
-
Width(mm)
-
Trusco Code
-
Tipo
- HO1MA-1.5
- HO1MA-3.0
- HO22M
- HO24M
- HO27M
- HO7MA
- HO7MA-60
- HO7MA-90
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 6 giorni o meno
- 10 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.