"Chiave per rastrelliere a doppio inserto 2" (supporta 6 misure)
- Sconto volumi elevati
[Features]
· With a replacement socket, 1 piece supports 6 sizes.
· Suitable for mounting inner wire supporting fittings or various racks during electrical construction work.
· A combination of 13 and 17 mm frequently used sockets.
· A slide long socket.
· The 17 mm tool is dual-face machined to enter raceways.
· Suitable for work with facilities using water.
· With safety rope mounting holes.
[Applications]
· Suitable for mounting inner wire supporting fittings or various racks during electrical construction work.
· Suitable for work with facilities using water.
· With a replacement socket, 1 piece supports 6 sizes.
· Suitable for mounting inner wire supporting fittings or various racks during electrical construction work.
· A combination of 13 and 17 mm frequently used sockets.
· A slide long socket.
· The 17 mm tool is dual-face machined to enter raceways.
· Suitable for work with facilities using water.
· With safety rope mounting holes.
[Applications]
· Suitable for mounting inner wire supporting fittings or various racks during electrical construction work.
· Suitable for work with facilities using water.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
TRW-WS2
Informazioni di base
| Type | Chiave multifunzione | Ratchet mechanism | Disponibile | Swivel (flex) | N/A |
|---|---|---|---|---|---|
| Overall Length(mm) | 169 | Width across flat dimension(mm) | 13×17 / 8×10×12×14 | Single Product/Set Classification | Set prodotto |
| Set Content(Point) | 2 | Set Content | 8×10×12×14、13×17 | Trusco Code | 344-8860 |
| Mass(g) | 290 | Features | Comes with replacement socket, with one piece supporting 6 sizes. It is applicable to the support fitting for inner wires and mounting of various types of racks during electric construction work. It is a combination of 13/17 mm sockets that are frequently used. It is a long sliding socket. 2-surface machining at 17 mm with a raceway. It is suitable for work on plumbing equipment. It is a mounting hole for safety rope. | Material: Main body | Stainless steel (SUS 420J2) |
Si trova sulla pagina di "Chiave per rastrelliere a doppio inserto 2" (supporta 6 misure), il codice articolo è il seguente: TRW-WS2.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto TRW-WS2.
Configura
Proprietà di base
-
Tipo
- TRW-WS2
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 6 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.