• A causa di motivi tecnici, il pagamento con carta di credito non è temporaneamente possibile. Ci scusiamo per l'inconveniente.

Pace Master

Pace Master

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente
BM-50
BM-50G
BM-50M
Codice componentePrezzo unitario standardSconto volumi elevatiGiorni spedizione?Product Type Probe diameter D
(mm)
Probe materials Method Mass
(g)
Measured pressure
(N)
Features Specifications Minimum Width of Measurement Tool
(mm)
Repeat accuracy
(μm)
Stroke H
(mm)
Touch Signal Battery Battery Life Height Accuracy
(mm)

341.98 €

5 giorni For conductive workpieces18CopperElectric current supply method2303Location of the blade tip is electrically detected. It uses an internal contact method that is compatible with various types of cutting tools and workpieces (BM-50G, BM-100G, BM-50M). The repeatability is ±1 μm (2σ). An embedded IC circuit enables secure detection. A cushioned structure that does not damage tools. Magnets at the bottom enable free attachment.LED Notice Supports conductive cutting tools and machined materials/machinesφ1±1(2σ)3LED lighting (Red)SR44X210 Hours Continuous Operation50+0.0050

357.96 €

Disponibile Stesso giorno

Stock

All compatible types14CeramicInternal contact type2402Location of the blade tip is electrically detected. It uses an internal contact method that is compatible with various types of cutting tools and workpieces (BM-50G, BM-100G, BM-50M). The repeatability is ±1 μm (2σ). An embedded IC circuit enables secure detection. A cushioned structure that does not damage tools. Magnets at the bottom enable free attachment.LED Notice Supports all cutting tools and machined materials/machinesφ1±1(2σ)3LED lighting (Red)SR44X210 Hours Continuous Operation50+0.0050

525.13 €

5 giorni All compatible types7CeramicInternal contact type2400.3Location of the blade tip is electrically detected. It uses an internal contact method that is compatible with various types of cutting tools and workpieces (BM-50G, BM-100G, BM-50M). The repeatability is ±1 μm (2σ). An embedded IC circuit enables secure detection. A cushioned structure that does not damage tools. Magnets at the bottom enable free attachment.LED Notice Supports all cutting tools and machined materials/machinesφ0.05±1(2σ)1LED lighting (Green)SR44X210 Hours Continuous Operation50+0.0050

Loading...

  1. 1

Informazioni di base

Product Category Measuring equipment

Ulteriori prodotti in questa categoria

Altri articoli che potrebbero interessarti

Supporto tecnico