Fascia poligonale A【10 Pezzi per confezione】
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Codice componente
|
|---|
| PGB2025-A-60 |
| PGB2025-A-80 |
| PGB2025-A-120 |
| PGB3030-A-120 |
| Codice componente |
Prezzo unitario standard
| Numero di pz. inclusi per conf. | Quantità minima d'ordine | Sconto volumi elevati | Width (mm) | Particle Size (#) | Max. Rotational Speed (min-1(r.p.m)) | Internal Diameter (mm) | Trusco Code | Order Code | |
|---|---|---|---|---|---|---|---|---|---|---|---|
47.15 € | 10 Pezzi per confezione | 1 conf. | Disponibile | 5 giorni | 25 | 60 | 20000 | 20 | 395-1723 | 468-27191 | |
47.15 € | 10 Pezzi per confezione | 1 conf. | 7 giorni | 25 | 80 | 20000 | 20 | 395-1731 | 468-27207 | ||
47.15 € | 10 Pezzi per confezione | 1 conf. | Disponibile | 6 giorni | 25 | 120 | 20000 | 20 | 395-1715 | 468-27225 | |
55.79 € | 10 Pezzi per confezione | 1 conf. | 7 giorni | 30 | 120 | 13000 | 30 | 395-1855 | 468-27304 |
Loading...
Informazioni di base
| Application | Lucidatura | Type | Fascia | Details Type | A Type |
|---|---|---|---|---|---|
| Application | Deburring after drilling; fine adjustment of inner diameters etc. and inner surface polishing of curved surfaces and pipes etc.; weld bead removal; removal of rust caused by machinery maintenance, etc. for sputtering equipment; paint peeling, finishing work, and deburring after cutting, etc.; and hairline, etc. order finishing as a substitute for work done using a grinding wheel with a shaft or a carbide bar, such as aluminum casting parting line removal, and deburring, etc. | Packaging Quantity(units/sheets) | 10 | Caution | * Never use beyond the maximum usage rotation number. * Be sure to insert the red finished surface of the polygon band facing in front of the drum shaft before use. * Please securely affix the dedicated drum shaft by inserting the rotation tool (grinder, drill, etc.) 2/3 of the shaft length. * When performing polishing work, please wear protective glasses, a dust mask, gloves, and a hat. * Please store away from direct sunlight, extreme aridity, and/or high humidity conditions. * Please read the handling instructions for the disk grinder to be used, and use only upon confirming that the product is in compliance. |
| Abrasive material | A | Features | Workpiece is regarded as a plane, not as a point, thus dramatically increasing work efficiency (approx. three times greater efficiency). Thanks to air cooling effect of multi-blade shape, less heat accumulates on the workpiece. By installing dedicated drum, one-touch conversion to required particle level is possible. Environmentally friendly, with 1/3 of industrial waste. Hairline finishing is easy and neat. No deep craving thanks to a soft touch. |
Configura
Proprietà di base
-
Width(mm)
-
Particle Size(#)
-
Max. Rotational Speed(min-1(r.p.m))
-
Internal Diameter(mm)
-
Trusco Code
-
Order Code
-
Tipo
- PGB
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 5 giorni o meno
- 6 giorni o meno
- 7 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.