Set chiavi a brugola, testa a semisfera (semi lunga)
- Sconto volumi elevati
[Features]
· The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
· Half ball finish allows achievement of easy insertion and the same level of torque transferability.
· The screw can be turned from a maximum slope degree of 32°.
· It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
· In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
· The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
· Final tightening can be performed with a ballpoint wrench by using the pipe handle.
· Partial painting is done so that the size can be distinguished at a glance based on color.
· The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
· Half ball finish allows achievement of easy insertion and the same level of torque transferability.
· The screw can be turned from a maximum slope degree of 32°.
· It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
· In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
· The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
· Final tightening can be performed with a ballpoint wrench by using the pipe handle.
· Partial painting is done so that the size can be distinguished at a glance based on color.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
THBR-9S
Informazioni di base
| Type | Chiave esagonale profilo a L | Tip Type | Tipo a sfera | Single Product/Set Classification | Set prodotto |
|---|---|---|---|---|---|
| Set Content(mm) | 1.5、2、2.5、3、4、5、6、8、10 | Set Content(piece) | 10 | Mass(g/Set) | 474 |
| JAN Code | 4989999391558 | Trusco Code | 768-4207 | Accessory | ● Holder ● Pipe handle |
| Material | Special Alloy Chrome Vanadium Steel | Ordering Unit | 1S |
Si trova sulla pagina di Set chiavi a brugola, testa a semisfera (semi lunga), il codice articolo è il seguente: THBR-9S.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto THBR-9S.
Configura
Proprietà di base
-
Ordering Unit
- 1S
-
Tipo
- THBR
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 6 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.