• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Tronchesi ad aria per applicazione automatica (GT-NY03G)

Tronchesi ad aria per applicazione automatica GT-NY03G

VESSEL

VESSEL

Dettagli del prodotto:

Codice articolo del costruttore: GT-NY03G

Marca: VESSEL

Prezzo: 391.78 €

Tempi di consegna: 15 giorni


Dati Tecnici:

Capacità O/D Rame: - mm

Consumo d'aria: 37 cm³/count

Pressione atmosferica: Da 0,4 a 0,5 Mpa

Capacità O/D Plastica morbida: 2 mm

Capacità O/D Plastica dura: 1.3 mm


Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

GT-NY03G

No. GT-NY05/10/15/25 Sliding Air Nippers Horizontal-Type

Product Information


● The horizontal slide enables space to be utilized effectively.
● The low profile of the nipper body allows objects to be removed from the machine without obstructing the operations of the chuck plate.

Specification

Reference
Capacity φ (mm)Model No.Size (mm)Air Consumption
(cm3/str.)		Weight
(g)		Slide Distance
(mm)		Hose PortEDP No.
Soft
Plastic		Hard
Plastic		CopperSteelABCDEFGHIJKLM
3.02.01.61.0GT-NY058.675.940.925152347.64M43221.68.548155Pull 0～3W/hose nipple
Hose I.D . φ2.5 mm		360646
3.02.01.61.0GT-NY05R48155Pull 0～3360647
3.02.01.61.0GT-NY05-448155Pull 0～3W/hose nipple
Hose I.D . φ2.5 mm ×O.D. φ4mm		360648
3.02.01.61.0GT-NY05R-448155Pull 0～3360649
3.52.3  GT-NY108.882.142.130202851.66M45241.67.568210Pull 0～3W/hose nipple
Hose I.D . φ2.5 mm		360652
3.52.3  GT-NY10R68210Pull 0～3360656
3.52.3  GT-NY10-468210Pull 0～3W/hose nipple
Hose I.D . φ2.5 mm ×O.D. φ4mm		360660
3.52.3  GT-NY10R-468210Pull 0～3360664
4.02.6  GT-NY1510.29348352533588M452727.5136319Pull 0～3W/hose nipple
Hose I.D . φ2.5 mm		360672
4.02.6  GT-NY15R136319Pull 0～3360673
4.02.6  GT-NY15-4136319Pull 0～3W/hose nipple
Hose I.D . φ2.5 mm ×O.D. φ4mm		360674
4.02.6  GT-NY15R-4136319Pull 0～3360675
5.03.4  GT-NY2512.5108.554.5403042699M52312.510.5184580Pull 0～5W/hose nipple
Hose I.D . φ4 mm		360680
5.03.4  GT-NY25R184580Pull 0～5360681
5.03.4  GT-NY25-6184580Pull 0～5W/hose nipple
Hose I.D . φ2.5 mm ×O.D. φ6mm		360682
5.03.4  GT-NY25R-6184580Pull 0～5360683
※Capacity indication shows the reference value when a standard blade is mounted. Values vary depending on the blade shapes and type of cut objects.
※K (blade projection) and H (maximum blade opening) indicate the dimensions when a standard blade (AJ type) is mounted. ※Air Pressure…0.4～0.5MPa (NY25 type: 0.5～0.6)
※B refers to the distance from the cut position for PUSH style models, and the distance from the start position for PULL style models.

No. GT-NY03G/10G Sliding Air Nippers Horizontal-Type 

Product Information


● V-groove slide base ensures constant, stable positioning.
● The unit is not subject to inclined loads, and has achieved high precision gate cutting performance.

Specification

Reference
Capacity φ (mm)Model No.Size (mm)Air Consumption
(cm3/str.)		Weight
(g)		Slide Distance
(mm)		Hose PortEDP No.
Soft PlasticHard PlasticABCDEFGHIJKLM
2.01.3GT-NY03G8.674.529.530-1946.53M40211.67.537160Pull 0～3W/hose nipple360741
2.01.3GT-NY03GR37160Push 0～3Hose I.D . φ2.5mm360742
2.01.3GT-NY03G-437160Pull 0～3W/tube fitting360743
2.01.3GT-NY03GR-437160Push 0～3Hose I.D .φ2.5×O.D. φ4mm360744
3.52.3GT-NY10G8.882.629.6352028546M45241.67.568275Pull 0～3W/hose nipple360753
3.52.3GT-NY10GR68275Push 0～3Hose I.D . φ2.5mm360754
3.52.3GT-NY10G-468275Pull 0～3W/tube fitting360755
3.52.3GT-NY10GR-468275Push 0～3Hose I.D .φ2.5×O.D. φ4mm360756
※Capacity indication shows the reference value when a standard blade is mounted. Values vary depending on the blade shapes and type of cut objects. ※K (blade projection) and H (maximum blade opening) indicate the dimensions when a standard blade (AJ type) is mounted. ※Air Pressure…0.4～0.5MPa

No. GT-NY10S/25S Double Action Sliding Air Nippers 

Product Information 


● The springless slide construction of the main unit ensures smooth movement.
● V-groove slide base has been employed for high precision positioning.  

Specifications 

Reference
Capacity φ (mm)Model No.Size (mm)Air Consumption
(cm3/str.)		Weight
(g)		Slide Distance
(mm)		Hose PortEDP No.
Soft PlasticHard PlasticABCDEFGHIJKLMNO
3.52.3GT-NY10S8.884.538302032556M45241.67.56.2515.5683000～3.5W/tube fitting
Hose I.D .φ2.5×O.D. φ4mm		360731
5.03.4GT-NY25S12.5106.547403047729M52312.510.5720.51846950～5.0W/tube fitting
Hose I.D .φ4×O.D. φ6mm		360732
※Capacity indication shows the reference value when a standard blade is mounted. Values vary depending on the blade shapes and type of cut objects.
※K (blade projection) and H (maximum blade opening) indicate the dimensions when a standard blade (AJ type) is mounted.
※Air Pressure…NY10S: 0.4～0.5MPa / NY25S: 0.5～0.6MPa

No. GT-NF05/10/15 Type-F Air Nippers

Product Information


● These compact, lightweight nippers have been designed for easy mounting inside equipment and to enable secure mounting under high-density mounting conditions.

Specifications

Reference
Capacity φ (mm)Model No.Size (mm)Air Consumption
(cm3/str.)		Weight
(g)		Hose PortEDP No.
Soft
Plastic		Hard
Plastic		CopperSteelABCDEFGHIJKLMNO
3.02.01.61.0GT-NF058.659.921.917182339.54M33221.68.46.2516.443101W/hose nipple
Hose I.D . φ2.5×φ4 mm		360606
3.52.31.71.1GT-NF108.865.123.120222843.56M3.55241.67.46.2515.463143360607
42.61.81.2GT-NF1510.2732525263348.58M452727.46.2516.4128219360608
※Capacity indication shows the reference value when a standard blade is mounted. Values vary depending on the blade shapes and type of cut objects.
※K (blade projection) and H (maximum blade opening) indicate the dimensions when a standard blade (AJ type) is mounted. Mounting screw for NF10 (M3.5) is regarded as spare part.
※Air Pressure…0.4～0.5Mpa

List of Blade Springs

EDP No.Size (mm)MaterialApplicable Models
Wire Dia. x O/D x Free Length + Pitch (or No. of Turns)
859116φ0.4×φ3.6×10 No. of Turns7.5TSUSNY03G
859111φ0.5×φ3.8×11 P=1.5SWPNY05
859115φ0.4×φ3.6×16.5 No. of Turns11.5TSUSNY10,NY15
859114φ0.6×φ5.2×17 No. of Turns10.5TSUSNY25
859110φ0.5×φ3.8×14 P=1.5SWPNT03,NT05
859112φ0.8×φ5.2×17 P=2.0SWPNT10
859113φ0.8×φ5.5×23 P=2.0SWPNT20

No. GT-NT03/05/10/20 Sliding Air Nippers Vertical-type

Product Information


● Blade opening is adjustable, and fine adjustments are easy to make after mounting the nippers, ensuring clean, unblemished cut surfaces.
● Blade can be installed either with the cutting edge outside or inside.

Specification

Reference
Capacity φ (mm)Model No.Size (mm)Air Consumption
(cm3/str.)		Weight
(g)		Slide Distance
(mm)		Hose PortEDP No.
Soft PlasticHard PlasticABCDEFGHIJK
1.51.0GT-NT03962743141968.11.5～3M32527178Pull 0～3W/hose nipple360601
1.51.0GT-NT03R27178Push 0～3Hose I.D φ2.5mm360611
1.51.0GT-NT03-427178Pull 0～3W/tube fitting360621
1.51.0GT-NT03R-427178Push 0～3Hose I.D φ2.5×O.D. φ4mm360631
2.51.5GT-NT05964745203271.13～6M42547325Pull 0～3W/hose nipple360602
2.51.5GT-NT05R47325Push 0～3Hose I.D φ2.5mm360612
2.51.5GT-NT05-447325Pull 0～3W/tube fitting360622
2.51.5GT-NT05R-447325Push 0～3Hose I.D φ2.5×O.D. φ4mm360632
3.52.3GT-NT101173853243888.14～7M42582515Pull 0～3W/hose nipple360603
3.52.3GT-NT10R82515Push 0～3Hose I.D φ2.5mm360613
3.52.3GT-NT10-682515Pull 0～3W/tube fitting360623
3.52.3GT-NT10R-682515Push 0～3Hose I.D φ4×O.D. φ6mm360633
5.03.4GT-NT201410310802844102.14.5～9M526203930Pull 0～8W/hose nipple360604
5.03.4GT-NT20R203930Push 0～8Hose I.D φ4mm360614
5.03.4GT-NT20-6203930Pull 0～8W/tube fitting360624
5.03.4GT-NT20R-6203930Push 0～8Hose I.D φ4×O.D. φ6mm360634
※Capacity indication shows the reference value when a standard blade is mounted. Values vary depending on the blade shapes and type of cut objects.
※Blade opening adjustment limit ( H)is the dimension adjusted for standard blade (AJ type). ※Air Pressure…0.4～0.5MPa (NT20 type: 0.5～0.6)
Numero di dati da visualizzare
30
45
60
  1. 1
Codice componente
GT-NY03G
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
Capacità O/D Rame
(mm) 		Consumo d'aria
(cm³/count) 		Pressione atmosferica
(Mpa) 		Capacità O/D Plastica morbida
(mm) 		Capacità O/D Plastica dura
(mm) 		Tubo I/D
(mm) 		Materiali Capacità O/D Acciaio
(mm) 		Intervallo di scorrimento
(mm) 		Direzione di scorrimento

391.78 €

1 15 giorni -37Da 0,4 a 0,521.3I / D 2.5--Da 0 a 3Tirare

Loading...

  1. 1
 

Informazioni di base

Porta tubo Con raccordo per tubo

Si trova sulla pagina di Tronchesi ad aria per applicazione automatica, il codice articolo è il seguente: GT-NY03G.
Ulteriori dettagli concernenti specifiche e dimensioni si trovano sotto il codice prodotto GT-NY03G.

Configura

Ripristina

1Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Capacità O/D Rame(mm)

    • 1.7
    • 1.8

    Ripristina

  • Materiali

    • Acciaio legato speciale

    Ripristina

  • Capacità O/D Acciaio(mm)

    • 1.1
    • 1.2

    Ripristina

  • Tipo

    • GT-NT03
    • GT-NY10R

    Ripristina

  • Consumo d'aria(cm³/count)

    • 27
    • 37
    • 47
    • 63
    • 68
    • 82
    • 128
    • 136
    • 184
    • 203
    • 237

    Ripristina

  • Pressione atmosferica(Mpa)

    • Da 0,4 a 0,5
    • Da 0,5 a 0,6

    Ripristina

  • Capacità O/D Plastica morbida(mm)

    • 1.5
    • 2
    • 2.5
    • 3.5
    • 4
    • 5

    Ripristina

  • Capacità O/D Plastica dura(mm)

    • 1
    • 1.3
    • 1.5
    • 2.3
    • 2.6
    • 3.4

    Ripristina

  • Tubo I/D(mm)

    • I / D 2,5 x O/D 4
    • I / D 2.5
    • I / D 4
    • I / D 4 x O/D 6

    Ripristina

  • Intervallo di scorrimento(mm)

    • Da 0 a 3
    • Da 0 a 3.5
    • Da 0 a 5
    • Da 0 a 5,0
    • Da 0 a 8

    Ripristina

  • Direzione di scorrimento

    • Doppia azione
    • Spingere
    • Tirare

    Ripristina

Filtrare per giorni di spedizione standard

    • Tutti gli articoli
    • 5 giorni o meno
    • 6 giorni o meno
    • 15 giorni o meno
    • 18 giorni o meno

    Ripristina

Attributi opzionali

Tipologia prodotto

Codice componente
GT-NT03-4
GT-NT03R
GT-NT03R-4
GT-NY03G-4
GT-NY03GR
GT-NY03GR-4
Codice componentePrezzo unitario standardQuantità minima d'ordineSconto volumi elevatiGiorni
spedizione standard
?		Capacità O/D Rame
(mm) 		Consumo d'aria
(cm³/count) 		Pressione atmosferica
(Mpa) 		Capacità O/D Plastica morbida
(mm) 		Capacità O/D Plastica dura
(mm) 		Tubo I/D
(mm) 		Materiali Capacità O/D Acciaio
(mm) 		Intervallo di scorrimento
(mm) 		Direzione di scorrimento

430.96 €

1 15 giorni -27Da 0,4 a 0,51.51I / D 2,5 x O/D 4Acciaio legato speciale-Da 0 a 3-

430.96 €

1 15 giorni -27Da 0,4 a 0,51.51I / D 2.5Acciaio legato speciale-Da 0 a 3-

430.96 €

1 15 giorni -27Da 0,4 a 0,51.51I / D 2,5 x O/D 4Acciaio legato speciale-Da 0 a 3-

391.78 €

1 18 giorni -37Da 0,4 a 0,521.3I / D 2,5 x O/D 4--Da 0 a 3Tirare

391.78 €

1 15 giorni -37Da 0,4 a 0,521.3I / D 2.5--Da 0 a 3Spingere

391.78 €

1 15 giorni -37Da 0,4 a 0,521.3I / D 2,5 x O/D 4--Da 0 a 3Spingere

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.