Penetratore in diamante Rockwell, tipo standard
Mitutoyo indenters for Rockwell hardness test
As the interface between machine and material, the indenter must be of immaculate quality.
Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.
Constant development at our calibration partners secures an unmatched quality level.
Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18.
A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.
As the interface between machine and material, the indenter must be of immaculate quality.
Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.
Constant development at our calibration partners secures an unmatched quality level.
Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18.
A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
Informazioni di base
| Accreditation Body | DAkkS | Accreditation Standard | ISO 17025 | Calibration | with |
|---|---|---|---|---|---|
| Collar Diameter(mm) | 13 | Collar Thickness(mm) | 3 | Cone Angle(degree) | 120 |
| Descrizione | Dur. Rockwell | Function Test | without | Indenter Diameter(mm) | 10 |
| Materiale | diamond | Method | Rockwell | Product line | HR-100. HR-200. HR-300. HR-400. HR-500. HR-600. AR-10. AR-20ARK |
| Shaft Length(mm) | 11 | Shaft Diameter(mm) | 6,34 | Campioni | ISO 6508-2, senza "function test"ASTM E-18 "Function Test" |
| Tip Radius | 0,2 | Total Length(mm) | 27 | Tipo | Diamond cone indenter |
| Usable Length(mm) | 16 |
Configura
Proprietà di base
-
Tipo
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 60 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.