?* Informazioni su tempi di consegna

• 

  Boccola SS【100 Pezzi per confezione】

  SHINOHARA ELECTRIC

  Can be used as an induction bushing for door opening and closing shaft.
  
  [Features]
  - The taper of the bushing smoothly guides the shaft into the locking aperture when locking the door.
  - Protects against noise caused by vibration.
  - Peeling of the coating around the lock aperture caused by opening and closing of the lock shaft is eliminated, preventing rust formation.
  - Mounting of the bushing can be performed in a single operation by simply pushing it in.

  CAD ：

  2D

  A partire da∗ ：	94.06 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Supporti【25-50 Pezzi per confezione】

  SHINOHARA ELECTRIC

  Can be used for conductor support inside a low-voltage apparatus.
  
  [Features]
  · Eliminates the time and effort that is required for manually processing conventional insulators.
  · Two types are available: one that includes nuts on both sides (S/T/D types), and one that includes nuts and bolts (SB/TB/DB types). Both types are available in a wide variety of different heights and diameters. Therefore, these supporters can be used for a variety of different applications.
  · Excellent insulation properties (creepage voltage: 2.5 kV or higher), lightweight, and will not crack.
  · Small type, H: 35 mm, ⌀: 20 mm (resin part) is also available as a conventional polypropylene supporter.
  · Small size stopper that does not interfere with adjacent screws, etc. Stopper is suited for use as intermediate support between bus bars.

  CAD ：

  2D

  A partire da∗ ：	63.01 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Barra per collegamento incrociato interruttori【100 Pezzi per confezione】

  SHINOHARA ELECTRIC

  Can be used for switch crossover wiring
  
  [Features]
  · Streamlining of wiring through use on transition wiring for common lines of switches.
  · The exposed part is insulation coated, and is therefore safe.
  · The insertion conformation is forked (Y-shaped).
  · Installation and removal are easy.
  · Final wiring result is particularly clean for operation panels, etc. with a large number of different switch types.

  CAD ：

  2D

  A partire da∗ ：	65.47 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Ampia mensola per scaffalatura a rack EIA, serie SRE

  TAKACHI ELECTRONICS ENCLOSURE

  Extensive EIA rack storage shelf (SRE)
  
  [Features]
  · Storage shelf for a 19” EIA standard rack.
  · Can also be installed in a 19” cabinet rack.
  · Wide, for effective use of storage surface.
  · Beige and black are available and can be selected in accordance with devices.
  · For SRE44-315/420, the shelf board and side boards are integrated.
  · On rare occasions, rack opening dimensions will differ by manufacturer, so confirm the dimensions before use.

  CAD ：

  2D

  A partire da∗ ：	54.76 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Tavolino scorrevole per rack EIA, serie NST

  TAKACHI ELECTRONICS ENCLOSURE

  EIA Rack Sliding Table (NST Series)
  
  [Features]
  - Reinforcing fixture for secure fixing.
  - Lock fixture to prevent falls when pulling out the table and to prevent table overhang.
  - If the table is turned upside down, it can be used as a drawer.
  - Attach the included protective sponge to the right and left side interiors before use.
  · Rack opening dimensions may differ by manufacturer, so confirm the dimensions before use.

  CAD ：

  2D

  A partire da∗ ：	123.69 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Accessori evaporatore scarichi per apparecchiatura di raffreddamento (staffe di installazione)

  OHM ELECTRIC

  Accessories for drain evaporator (installation brackets)

  • Sconto volumi elevati

  A partire da∗ ：	31.00 €
  Consegna da ：	43 giorni

  *Prezzo unitario in configurazione base

• 

  Barra fissa regolabile

  MIRAI INDUSTRY

  [Features]
  - Simple installation with single-sided mounting.
  - Use to mount a box to a lightweight partition wall.
  - No need to purchase accessories for different stud sizes or types; this is all you need to mount a box.
  - Convenient for locations with narrow stud spacing (can be used even when cut down).
  - Use the included double-sided tape for temporary fastening is possible; mounting to lightweight studs is also simple.
  - The manufacturer's slide box includes holes for mounting, so it can be easily mounted to the center (vertical) position of an adjustable fixed bar (exclusions apply).
  - The KGP-230 (total length 230 mm) can be mounted to any location, provided the studs are installed at an interval of 450 mm.
  - The slide box (thickness 36mm) will fit right in if you align the box with the stud end before mounting.

  A partire da∗ ：	2.65 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Staffa per montaggio a parete serie VBAP

  SETTSU METAL INDUSTRIAL

  [Features]
  · A dedicated bracket for the VBA Series.
  · Can be fixed to a wall using screws, enabling the VBA series to be attached with a single touch.

  A partire da∗ ：	7.87 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Chassis serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · Used for installing various electronic components. This chassis has a flat plate shape that makes drilling holes easy.
  · An aluminum phosphate treatment is applied for conductivity.
  · Place it on the front and rear W frames of the RMU series and fasten it with M4 screws from the bottom using the holes drilled in the W frame.

  A partire da∗ ：	35.07 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Supporto inclinato serie PS

  SETTSU METAL INDUSTRIAL

  [Features]
  · General purpose tilt stand.
  · Mount when tilting the case for use.
  · Specified holes can be provided on the case bottom and the like for installation using commercially available M3 screws and nuts.

  A partire da∗ ：	6.17 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Kit di fissaggio a parete serie VSO

  SETTSU METAL INDUSTRIAL

  [Features]
  · Kit for hanging on a wall.
  · To hang on walls, mount an H type wall hanging holder to the wall, attach the adapter to the bottom cover with the supplied screws, and hang the adapter on the hook of the wall hanging holder.

  A partire da∗ ：	16.78 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  HD Cam lock

  RITTAL

  • Sconto volumi elevati

  CAD ：

  2D / 3D

  A partire da∗ ：	35.14 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  HD Levelling foot【4 Pezzi per confezione】

  RITTAL

  • Sconto volumi elevati

  CAD ：

  2D / 3D

  A partire da∗ ：	209.55 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

Loading...