?* Informazioni su tempi di consegna

• 

  Telaio per connettori B serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · Frame for mounting edge board connectors, DIN connectors, etc.
  · φ3.2 holes drilled at 6.35 mm (1/4") pitch.
  · Insert a bar nut or M3 hex nut into the groove in guide frame B or C, then attach the frame so that the part marked "TOP" is up and "BOTTOM" is down and both can be seen when looking at it from the back of the card rack.
  · Align with the edge board type and DIN type connectors, slide them in the direction of the arrow until they hit the inner wall of the D frame and fix.

  A partire da∗ ：	31.38 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Telaio per connettori C serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · Frame for mounting edge board connectors, DIN connectors, etc.
  · φ3.2 holes drilled at 6.35 mm (1/4") pitch.
  · Insert a bar nut or M3 hex nut into the groove in guide frame B or C, then attach the frame so that the part marked "TOP" is up and "BOTTOM" is down and both can be seen when looking at it from the back of the card rack.
  · Align with the edge board type and DIN type connectors, slide them in the direction of the arrow until they hit the inner wall of the D frame and fix.

  A partire da∗ ：	31.68 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Telaio per connettori D serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · Frame for mounting edge board connectors, DIN connectors, etc.
  · φ3.2 holes drilled at 6.35 mm (1/4") pitch.
  · Insert a bar nut or M3 hex nut into the groove in guide frame B or C, then attach the frame so that the part marked "TOP" is up and "BOTTOM" is down and both can be seen when looking at it from the back of the card rack.
  · Align with the edge board type and DIN type connectors, slide them in the direction of the arrow until they hit the inner wall of the D frame and fix.

  A partire da∗ ：	34.24 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Telaio per connettori E serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · Frame for mounting edge board connectors, etc.
  · φ3.2 holes drilled at 6.35 mm (1/4") pitch.
  · Use for connectors whose mounting positions match the center of the card guide, such as edge board connectors.
  · Use the sub H frame to directly attach this frame to the sub rack.
  · Install the connector frame F so that the part marked "TOP" is up and "BOTTOM" is down and both can be seen when looking at it from the back of the sub-rack.

  A partire da∗ ：	37.10 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Telaio per connettori F serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · Frame for mounting DIN connectors, etc.
  · φ3.2 holes drilled at 6.35 mm (1/4") pitch.
  · Use for connectors whose mounting positions are displaced from the center of the card guide by 4.35 mm to the right, such as DIN connectors.
  · Use the sub H frame to directly attach this frame to the sub rack.
  · Install the connector frame F so that the part marked "TOP" is up and "BOTTOM" is down and both can be seen when looking at it from the back of the sub-rack.

  A partire da∗ ：	37.10 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Telaio per connettori G serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · Frame for mounting edge board connectors, DIN connectors, etc.
  · φ3.2 holes drilled at 6.35 mm (1/4") pitch.
  · When the mounting position of the connector matches the center of the card guide, such as with edge board connectors, attach the spacer with the "EDGE" engraved stamp and attach SHF brackets to both ends.
  · When the mounting position of the connector is displaced from the center of the card guide by 4.35 mm to the right, such as with DIN connectors, attach the spacer with the "DIN" engraved stamp and attach SHF brackets to both ends.
  · Looking at the sub rack from the back, use either the sub H or sub W frame accessories to directly attach this frame to the sub rack., making sure the part marked "TOP" is up and "BOTTOM" is down.
  · The strongest frame among the connector frames.

  A partire da∗ ：	45.57 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Telaio doppio per installazione connettori, serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU series.
  · Frame for mounting edge board connectors, two-piece right angle connectors, etc.
  · M3 threaded at 6.35 mm (1/4") pitch.
  · Use the sub H frame accessory attached to the left and right of the sub rack to directly attach this frame to the RKU series.

  A partire da∗ ：	19.80 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Piastra laterale serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · It also serves as internal protection that functions as a dust cover, and can be used as a desktop.
  · This plate has a flat plate shape that makes drilling holes easy.
  · The structure involves fitting into the H frame and D frame grooves.
  · Prevents vibration by pressing the side plate from the inside of the RMU series with M3 screws.

  A partire da∗ ：	8.52 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Piastra laterale II serie RKP【2 Pezzi per confezione】

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · It serves as internal protection that functions as a dust cover, and can also be used as a desktop.
  · This plate has a flat plate shape that makes drilling holes easy.
  · The structure involves fitting into the H frame and D frame grooves.
  · Prevents vibration by pressing the side plate II from the inside with M3 screws.

  A partire da∗ ：	10.18 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Sottotelaio H serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU series.
  · When mounting the card guide, the front end is mounted to the front W frame, but the rear end is mounted to the card guide mounting W frame.
  This card guide mounting W frame is supported by the sub H frame.
  · An accessory also used when storing PCBs smaller than the applicable PCB size of the Subrack RKU Series.
  · Using this, the small PCB slides the card guide mounting W frame up and down to be fixed at an appropriate position according to the size of the PCB.
  · There are two grooves to the front and rear of the sub H frame for inserting M3 hex nuts, so the card guide mounting W frame and connector mounting W frame, etc., can be fastened.
  · Use the D frame on the left and right of the card rack to directly attach this frame to the RKU series.
  · There is a groove on the D frame into which the M3 hex nut can be inserted, to be fastened with the inserted nut.

  A partire da∗ ：	7.53 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Sottotelaio H serie II RKM

  SETTSU METAL INDUSTRIAL

  [Features]
  · Parts for the plug-in unit for sub rack RKU/RKU2 series.
  · When mounting the card guide for RKU series, the front end is mounted to the front W frame, but the rear end is mounted to the card guide mounting W frame.
  · Supports this card guide mounting W frame. Furthermore, it is a plug-in unit RKM Series Type I dedicated frame that can avoid electronic parts incorporated in the PCB. This solves the problems which may arise in particular at the right end of the internal subrack.
  · A frame for mounting the card guide mounting W frame and the connector mounting W frame.

  A partire da∗ ：	18.44 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Sottotelaio W serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU series.
  · A frame that is used when storing a PCB horizontally.
  · There are two grooves to the front and rear for inserting M3 hex nuts, so the card guide mounting frame and connector mounting frame can be tightened to the desired position.
  · Can be mounted by using the many holes drilled in the D frame of the RKU series.

  A partire da∗ ：	11.52 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Copertura superiore serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · It also serves as internal protection that functions as a dust cover, and can be used as a desktop.
  · Inserts to the W frame of the RMU series through use with the top board holder.
  · This cover is designed with a flat plate shape to make drilling easier.

  A partire da∗ ：	30.02 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Coperchio superiore/inferiore, serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · It serves as internal protection that functions as a dust cover, and can also be used as a desktop. Parts can be installed depending on the situation.
  · Because insertion is from the back in this structure, the feet can be removed and reinstalled after main unit assembly is complete.

  A partire da∗ ：	40.41 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Barra scanalata 399AN30-7Z serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · Punched bar the same as those included with the Sub Rack RKU2 series accessory connector frames B/C/D (RKP-43CWFB/C/D) and rear panel E (RKP-□□ERP).
  · Insert into the RKU2 unit, rear W frame, and RKU2 series accessory guide frame B/C (RKP-43GWFB/C) for use.

  A partire da∗ ：	7.68 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Barra scanalata da 400mm serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · A bar nut made to save the time and effort of attaching individual nuts when installing a DIN connector to the connector frame.
  · M2.5 threaded at 6.35 mm (1/4") pitch.
  · Use the connector frame to directly attach this bar nut to the RKU2 series.

  A partire da∗ ：	15.33 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Barra scanalata 400M3 serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · A bar nut made to save the time and effort of attaching individual nuts when installing an edge board connector to the connector frame.
  · M3 threaded at 6.35 mm (1/4") pitch.
  · Use the connector frame to directly attach this bar nut to the RKU2 series.

  A partire da∗ ：	15.94 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Set di viti serie ZM【10 Pezzi per confezione】

  SETTSU METAL INDUSTRIAL

  [Features]
  · A metric screw that fixes the card lock retainer or the card retainer to the PCB.

  A partire da∗ ：	5.90 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Set di viti serie ZU【10 Pezzi per confezione】

  SETTSU METAL INDUSTRIAL

  [Features]
  · An inch screw that fixes the card lock retainer, etc. to the PCB.

  A partire da∗ ：	9.00 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Serie RKP di cerniere

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · A hinge used for opening and closing front panels.
  · Attach the rotor side to the front panel and the stator to the RKU series W frame.
  · Depending on how the stator is attached, two functions can be performed: vertical and horizontal opening and closing.
  · In other words, the stator must face vertically for the horizontal open/close type, while it should face horizontally for the vertical open/close type.
  · Two knob screws and E rings each are included for fixing the front panel.
  · In the left and right opening/closing type, whether it opens right or left is determined depending on whether the stator is attached to left or right.
  · The front panel of the front and rear opening and closing type is made to stop at a roughly horizontal point when completely open.

  A partire da∗ ：	30.52 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Pannello frontale A serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · I/O connectors and other operation accessories can be attached to this fixed type front panel.
  · This panel has a flat plate shape that makes drilling holes easy.
  · Naturally, it can also be used for the rear section.
  · Mount to the front and rear part of the RMU series with M3 screws.

  A partire da∗ ：	17.51 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Pannello frontale B serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · I/O connectors and other operation accessories can be attached to this vertical open/close type front panel.
  · The panel will be stopped and kept in an approximately horizontal position when completely open.
  · This panel is used with the RKP-10AHG hinge accessory.
  · Flat plate shape makes drilling easier.
  · It can also be used at the rear part of the RMU series.
  · The separately sold hinge (RKP-10AHG) is attached to the W frame so that the pin on the stator side faces sideways.

  A partire da∗ ：	22.92 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Pannello frontale C serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · I/O connectors and other operation accessories can be attached to this horizontal open/close type front panel.
  · This panel is used with the RKP-10AHG hinge accessory.
  · Flat plate shape makes drilling easier.
  · It can also be used at the rear part of the RMU series.
  · The hinge is attached to the W frame so that the pin on the stator side is upright.
  · Can be set to open to the right or left depending on whether the stator is installed to the left or right side.

  A partire da∗ ：	21.87 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Pannello frontale D serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · I/O connectors and other operation accessories can be attached to this insertable fixed type front panel.
  · This panel has a flat plate shape that makes drilling holes easy.
  · Screw-fastening is not necessary because it slides into the groove in the front H frame of the main unit.

  A partire da∗ ：	21.96 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Estremità testa, serie RKP【20 Pezzi per confezione】

  SETTSU METAL INDUSTRIAL

  [Features]
  · The tip of card guide II. When mounting, this will be the front top or back bottom part.
  · The same item as the head end of card guide II RKP series (RKP-□□□CG□2).

  A partire da∗ ：	10.25 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Telaio D terminale, serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · A frame used when partitioning the inside of the sub rack RKU2 series into several blocks or when storing PCBs as in the application example.
  · There are two grooves to the left and right for inserting M3 hex nuts, so the sub H frame, etc. can be fastened to the desired position.
  · Shielding effects can be produced between the blocks by installing a shield plate.
  · Install this frame using the holes in the top and bottom of the W frame of this frame.
  · Includes 5 types according to the sub rack depth.

  A partire da∗ ：	9.25 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Copertura inferiore serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · It serves as internal protection that functions as a dust cover, and can also be used as a desktop. Parts can be installed depending on the situation.
  · The structure involves fitting into the W frame and D frame grooves.
  · This cover is designed with a flat plate shape to make drilling easier.

  A partire da∗ ：	31.69 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Pannello posteriore serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · Fixed-type rear panel to which parts (I/O connectors) can be installed at the back.
  · This panel has a flat plate shape that makes drilling holes easy.
  · Mount to the rear part of the RMU series with M3 screws.

  A partire da∗ ：	11.30 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Pannello posteriore E serie RKP

  SETTSU METAL INDUSTRIAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · Fixed-type rear panel to which parts (I/O connectors) can be installed at the back.
  · This panel has a flat plate shape that makes drilling holes easy.
  · Can be mounted to the rear W frame with M3 screws.

  A partire da∗ ：	13.88 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  TS Base/plinth component, 100mm

  RITTAL

  CAD ：

  2D / 3D

  A partire da∗ ：	1.00 €
  Consegna da ：	Preventivo

  *Prezzo unitario in configurazione base

• 

  TS Base/plinth component, 200mm

  RITTAL

  A partire da∗ ：	1.00 €
  Consegna da ：	Preventivo

  *Prezzo unitario in configurazione base

• 

  TS Trim panel, 100mm

  RITTAL

  A partire da∗ ：	1.00 €
  Consegna da ：	Preventivo

  *Prezzo unitario in configurazione base

• 

  TS Trim panel, 200mm

  RITTAL

  A partire da∗ ：	1.00 €
  Consegna da ：	Preventivo

  *Prezzo unitario in configurazione base

• 

  PC Handle adaptor for comfort handle

  RITTAL

  • Sconto volumi elevati

  A partire da∗ ：	8.00 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Comfort handle, for lock inserts

  RITTAL

  • Sconto volumi elevati

  A partire da∗ ：	36.88 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Comfort handle, for padlock and lock inserts

  RITTAL

  • Sconto volumi elevati

  A partire da∗ ：	42.08 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Comfort handle, with security lock insert E1 1)

  RITTAL

  • Sconto volumi elevati

  A partire da∗ ：	47.43 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Comfort handle, for semi-cylinder

  RITTAL

  • Sconto volumi elevati

  A partire da∗ ：	36.88 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Comfort handle, prepared for ASSA lock system

  RITTAL

  • Sconto volumi elevati

  A partire da∗ ：	39.05 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  PC Enclosure accessories - Lock Insert【1-2 Pezzi per confezione】

  RITTAL

  • Sconto volumi elevati

  CAD ：

  2D / 3D

  A partire da∗ ：	2.37 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  PS Utility lectern, for door width 600mm

  RITTAL

  • Sconto volumi elevati

  A partire da∗ ：	123.78 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  PS Utility lectern, for door width 800mm

  RITTAL

  • Sconto volumi elevati

  A partire da∗ ：	137.97 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  TS Partial mounting plate

  RITTAL

  • Sconto volumi elevati

  A partire da∗ ：	34.71 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  TS punched section with mounting flange, for the inner mounting level or for tubular door frames【4 Pezzi per confezione】

  RITTAL

  • Sconto volumi elevati

  CAD ：

  2D / 3D

  A partire da∗ ：	29.06 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  TS punched section with mounting flange, for the outer mounting level【4 Pezzi per confezione】

  RITTAL

  • Sconto volumi elevati

  A partire da∗ ：	28.78 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

Loading...