?* Informazioni su tempi di consegna

• 

  Custodie spine per connettori D-Sub (in plastica), serie CTF

  Hirose Electronic

  These are resin cases for D-sub connectors. Screw locks make them sturdy and secure.
  
  [Features]
  · Because the lock mechanism is a screw type mechanism, it is rugged and reliable.
  • Made of strong ABS resin, so they are lightweight and sturdy.
  • The plastic cases are divided at the center part of the cable guiding passage, making them easy to assemble and maintain, and requiring fewer screws.
  • Locking brackets are available in either rectangular or hex formats to match the way the panel is mounted.
  • 25-contact models are plug cases for modems as defined in JIS-C-6361.
  • Easily incorporated using solder (HD type) or crimping (CD type).

  • Sconto volumi elevati

  A partire da∗ ：	4.24 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore D-Sub (collegamento a saldare), serie HD

  Hirose Electronic

  A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
  
  [Features]
  · Small and lightweight connector due to metal shell.
  · The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
  · The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
  · CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

  • Sconto volumi elevati

  A partire da∗ ：	3.73 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore D-Sub (montaggio su scheda ad angolo retto), serie RD*D

  Hirose Electronic

  These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.
  
  [Features]
  · Has a metal shell and so has a small and lightweight connector.
  • They are integrated with RD-type molds and are of simple construction.
  • They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.
  • The connection and the board mounting areas are metal plated.
  • Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).
  • A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.
  • Various accessories can be employed to allow these connectors to be used in different applications.

  • Sconto volumi elevati

  A partire da∗ ：	4.20 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore D-Sub (collegamento con contatto a pressione su cavo a nastro, profilo basso) serie FD*D

  Hirose Electronic

  A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.
  
  [Features]
  • Metal shell makes it compact and sturdy.
  • Connectors can be mounted on the chassis, or on the front or back sides of the panel.
  • Height of the wiring side is greatly reduced to facilitate more compact sets.
  · The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
  • Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
  • Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

  • Sconto volumi elevati

  A partire da∗ ：	5.54 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore D-Sub (collegamento filo a pressione su cavo a nastro), serie FD

  Hirose Electronic

  A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.
  
  [Features]
  · Has a metal shell and so is small and lightweight.
  · Connector mounting can be performed on the chassis, front or back, or one of the sides.
  · The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
  · As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.
  · The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.
  · A connection press can also be used.

  • Sconto volumi elevati

  A partire da∗ ：	11.45 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore D-Sub (collegamento filo a crimpare) - Serie CD【1-100 Pezzi per confezione】

  Hirose Electronic

  A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
  
  [Features]
  · Has a metal shell and so is small and lightweight.
  · Connector mounting can be performed on the chassis, front or back, or one of the sides.
  · The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
  · The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

  • Sconto volumi elevati

  A partire da∗ ：	1.49 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore con terminale D serie DX*LM

  Hirose Electronic

  The D terminal connector is for digital broadcast devices.
  
  [Features]
  ・Compatible with 3 mm panel thickness: by pushing in the mating portion 1.5 mm, it is compatible with 3 mm housing panel thickness.
  ・All possible measures against static electricity: through independent construction, the order of metallic shell to lock piece circuit board ensures that static is grounded out.
  ・Temporary circuit board fixing mechanism: a hood-shaped boss is installed on the lower connector portion and designed to fall forward when mounted on the circuit board to prevent wobbling.
  ・Enhanced circuit board fixing power: by soldering the enlarged lock piece, lead portion circuit board fixation is widely improved.
  ・A sufficiently wide safety margin is taken to prevent damage in the case that mishandling or unexpected force is applied.
  ・Conforms to EIAJ standard RC-5237: conforms to D terminal connector requirements for digital broadcast video and image signal connections.

  • Sconto volumi elevati

  A partire da∗ ：	2.09 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Custodia di copertura per serie HIF3B

  Hirose Electronic

  This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.

  • Sconto volumi elevati

  A partire da∗ ：	4.70 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per cavo a nastro conforme allo standard MIL - Serie HIF3B【1-100 Pezzi per confezione】

  Hirose Electronic

  MIL Standard-compliant ribbon cable connector. A wide variety are available and are used broadly in numerous types of devices and equipment.
  
  [Features]
  · MIL Standard-compliant: The HIF3B Series was developed as a MIL standard-compliant product, and is used for a broad range of purposes.
  · Compatible with the HIF3 Series.
  · UL certified product: The HIF3B Series is UL-certified as a connector.
  · Mechanism for preventing incorrect insertion: Guiding method (MIL Standard) where guide keys are inserted in the pin header-side to create convex parts, which are fitted with the concave parts of sockets.
  · Guiding is achieved via insertion of a polarizing key into the socket hole.
  · Guiding achieved by fitting a convex element on the socket-side (HIF3A type) with a slot in the center of the pin-header side.
  · Compatible wire AWG #28: Compatible wiring corresponds to AWG #28 flat cabling (7 wires／0.127 mm, diameter of outer covering 0.9±0.1mm)
  Some in-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Sconto volumi elevati

  A partire da∗ ：	1.62 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore conforme a DeviceNet, serie HR31

  Hirose Electronic

  These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
  
  [Features]
  · DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
  · Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
  · Snap-lock: The snap-lock feature creates a tactile click when mating.
  · Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
  · Designed to allow for removal by ⌀1 mm pin when improperly wired.
  · Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

  • Sconto volumi elevati

  A partire da∗ ：	1.48 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore multifunzione in due pezzi a passo dimezzato serie FX2【1-35 Pezzi per confezione】

  Hirose Electronic

  Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

  • Sconto volumi elevati

  Consegna da ：	Stesso giorno

• 

  Connettore I/O a passo dimezzato (originale) serie DX

  Hirose Electronic

  I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.
  
  

  • Sconto volumi elevati

  A partire da∗ ：	5.44 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore I/O a passo dimezzato (per servoamplificatori Fanuc), serie FI

  Hirose Electronic

  This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.
  
  [Features]
  ・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
  ・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
  ・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
  ・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
  ・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

  • Sconto volumi elevati

  A partire da∗ ：	4.70 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore I/O a passo dimezzato (per usi generici) serie DX*M

  Hirose Electronic

  This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

  • Sconto volumi elevati

  A partire da∗ ：	3.24 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per rack e pannello serie QR/P1【1-100 Pezzi per confezione】

  Hirose Electronic

  Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
  
  [Features]
  · The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  · The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
  · Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
  · Guide pins are metallic to withstand coupling impact.
  · Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Sconto volumi elevati

  A partire da∗ ：	1.69 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per rack e pannello, serie QR/P4

  Hirose Electronic

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  • Sconto volumi elevati

  A partire da∗ ：	3.46 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per rack e pannello, serie QR/P6

  Hirose Electronic

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design crimp terminals divided for power supplies and signals with guide pins and insulation in a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles opposite each other on one side are distributed with 6.9-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  • Sconto volumi elevati

  A partire da∗ ：	3.26 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per rack e pannello, serie QR/P8

  Hirose Electronic

  • Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
  
  [Features]
  • Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
  • By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
  • In addition, terminals for signals are positioned with a 2-mm pitch.
  • The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
  • Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
  · The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
  • This product has obtained UL, CSA, and TUV certifications.

  • Sconto volumi elevati

  A partire da∗ ：	1.17 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore per rack e pannello, serie QR/P【1-100 Pezzi per confezione】

  Hirose Electronic

  Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
  • For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • Guide pins are made of metal for the durability to withstand coupling shocks.
  • Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.

  • Sconto volumi elevati

  A partire da∗ ：	1.43 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore di interfaccia quadrato, in miniatura con blocco - Serie ST

  Hirose Electronic

  While being small in size and low-profile in design with a height of 3 mm, the lock mechanism is powerful in this interface connector. Ideal for use with interfaces of small devices.
  
  [Features]
  · Powerful lock mechanism: The design enables resistance against tensive force of 49 N in vertical and horizontal directions, and in the direction of engagement, while the connector is in a mated state.
  · Protection is ensured even if sudden impact occurs unexpectedly, enabling worry-free use.
  · Prevents reverse entry and diagonal mating: The four upper and lower keys prevent reverse entry and diagonal mating of the connector.
  · If diagonal mating occurs, then the construction ensures protection from contact between the receptacle signal portion and the plug. Thus, this connector is ideal for use with peripherals that require frequent insertion and removal.
  · Ideal for use with interfaces included in small devices: The plug is 8 mm in thickness and 20 mm in length, making it a natural fit for use with small devices.
  · Receptacle is low-profile with a height of 3 mm, and the contact pitch is 0.5 mm. Product can be mounted with a small footprint, helping achieve device miniaturization.
  · Wide variety of offerings: Can be used with various types of peripheral device connections. A broad range of offerings includes a sealed plug for data communication, a non-sealed plug for charging, a reverse plug type which supports mounting, a cradle-type that can be used for cradle equipment, and more.
  · Cable type can be chosen by the user: Plugs are connected via soldering, so cables can be chosen by the user.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Sconto volumi elevati

  A partire da∗ ：	2.27 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore di interfaccia rettangolare piccolo di lunga durata, serie 3500

  Hirose Electronic

  This small interface connector includes a lock, and has excellent performance, holding up for 20,000 insertion and removal cycles in testing.
  
  [Features]
  • This connector has a long service life and can be inserted and removed up to 20,000 times.
  • The terminal structure has high reliability, and is a 2-point contact bellows type.
  • In response to forceful pulling on the lock, the unit unlocks utilizing the "snap lock method." This makes the connector resistant to damage from outside forces pulling on the cable unexpectedly.
  • By pushing the button on the left or right side of the plug, you can easily unlock the cable, and because there's an audible "clicking" sound when the cable locks in place, you can be absolutely sure that it is locked.
  • Small and lightweight (the 16-core receptacle is approximately 2 g), effective for size and reduction of terminal equipment.
  • The new boxes and metal shell bending structure utilized function as EMI measures, and the connector itself is durable.
  • Just push a button and EDS measures are complete through the utilization of an over-molded plug cover.
  • The circuit board implementation method uses a 0.8-mm pitch row with the SMT method, so implementation is easy.
  • Conforms to circuit board with t values of 0.81 to 1.6 mm, giving users an extensive selection of circuit boards.
  • Two types of wire connection methods on the plug side are available. One is a pressure welded type for wire connection labor reduction, and the other is a solder type with arbitrary cable type selection available.

  • Sconto volumi elevati

  A partire da∗ ：	3.92 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore scheda-cavo serie MDF51 per PCB con resistenza alta tensione (3000V) con blocco incluso【1-100 Pezzi per confezione】

  Hirose Electronic

  This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
  
  [Features]
  • Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
  • This also prevents accidents resulting from partial mating.
  • Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
  • Also, the mating surface has a large guiding area to make insert operations easier to perform.
  • Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
  • Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
  • Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
  • UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only)

  • Sconto volumi elevati

  A partire da∗ ：	1.27 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore piccolo per rack e pannello, serie QR/P15

  Hirose Electronic

  Construction is divided into main connector unit / cable connection portion. 8, 24 (4 pins for power source) and 40-pin configuration.
  
  [Features]
  ・Construction divided into main connector unit / cable connection portion: dividing the main body into main connector unit / cable connection portion parts enables product harness insertion from the back, increasing cable connection harness and set mounting workability.
  ・Sequence structure: the 40-pin type uses 2 pins for both terminals as a sequence terminal, taking safety into full consideration.
  ・Power supply compatibility: The 24-pin type incorporates power source terminal type.
  ・The power supply terminal connection uses MDF6 series 4-pin connectors (3.5-mm pitch, UL and CSA certified). Use of AWG16 ensures a 6A power supply capacity.
  ・Further, it is also possible to crimp using automated machines.
  ・Contact reliability: the main connector body contact portion uses a forked, double contact (tuning fork) shape in an effort to offer more stable contact.

  • Sconto volumi elevati

  A partire da∗ ：	2.83 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore di interfaccia rettangolare piccolo, serie 3200

  Hirose Electronic

  This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.
  
  [Features]
  • A receptacle connector board implementation surface with a height of the 2.9 mm.
  • The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.
  • This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.
  • This receptacle connector can also be prepared in an embossed packaging product format.
  • This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.
  • A latch lock is applied to both sides for mating processes.
  • This lock is implemented with the minimum space possible, and helps downsize your product set.
  • Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.
  • The wire connection of this plug connector use a solder attachment type applicable to all types of wires.
  • The number of pins available is either 8 or 10.

  • Sconto volumi elevati

  A partire da∗ ：	2.57 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore quadrato multipin (SUMICON) serie 1600【1-100 Pezzi per confezione】

  Hirose Electronic

  The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
  
  [Features]
  · The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
  · Connector units are available in soldering, wrapping, or crimping types.
  · Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.

  • Sconto volumi elevati

  A partire da∗ ：	1.47 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore di interfaccia rettangolare, a profilo ultra basso - Serie LX

  Hirose Electronic

  An ultra-low-profile interface connector with a mounting height of 2.0 mm. While being ultra low-profile, provides toughness and excellent contact reliability, contributing to the slimming of devices.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Sconto volumi elevati

  A partire da∗ ：	2.47 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore maschio per relè con saldatura a pressione, serie HIF3BA-*PD

  Hirose Electronic

  Can be used for cable-to-cable wiring inside machinery. The HIF3B series socket is also compatible with the HIF3A series.

  • Sconto volumi elevati

  A partire da∗ ：	7.15 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Custodia serie HCN

  HONDA TSUSHIN KOGYO

  An ultra-compact and space saving 0.8mm pitch interface connector case.

  A partire da∗ ：	3.49 €
  Consegna da ：	48 giorni

  *Prezzo unitario in configurazione base

• 

  Connettori serie HCN【1-10 Pezzi per confezione】

  HONDA TSUSHIN KOGYO

  An HCN Series connector.

  Consegna da ：	48 giorni

• 

  Adattatore per multi-drop serie HCN.【10 Pezzi per confezione】

  HONDA TSUSHIN KOGYO

  [Features]
  · An adapter for use with HCN Series multi-drops.

  A partire da∗ ：	53.04 €
  Consegna da ：	63 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore con saldatura a pressione - Serie HCN【10 Pezzi per confezione】

  HONDA TSUSHIN KOGYO

  [Features]
  · The HCN Series crimp connector.

  A partire da∗ ：	53.02 €
  Consegna da ：	89 giorni

  *Prezzo unitario in configurazione base

• 

  Tipo a crimpare serie 17DE

  FUJIKURA (DDK)

  Crimp connection connector for cable AWG22 to 30 (insulation outer diameter φ0.8 to φ1.4).

  • Sconto volumi elevati

  CAD ：

  2D

  Consegna da ：	3 giorni

• 

  Tipo DIP dritto serie 17JE

  FUJIKURA (DDK)

  Straight DIP type connector which can be mounted vertically on a PCB.

  CAD ：

  2D

  Consegna da ：	3 giorni

• 

  Cavo piatto saldato a pressione serie 57FE

  FUJIKURA (DDK)

  [Features]
  • The 57FE series is a flat cable pressure-welded connector that has fittings covered by a metal shell, which is a countermeasure for electromagnetic radiation that helps reduce noise.
  • Basic varieties include 10, 20, 30, and 40 types.

  • Sconto volumi elevati

  CAD ：

  2D

  Consegna da ：	3 giorni

• 

  Presa dritta per cavo a nastro DIP serie 57GE.

  FUJIKURA (DDK)

  [Features]
  ・The 57GE series consists of straight DIP-type connectors with fittings covered by a metal shell, which is a countermeasure against electromagnetic radiation that helps to reduce noise.
  ・Type 40 (receptacle for I/F).

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	6.23 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Presa ad angolo retto serie 57LE

  FUJIKURA (DDK)

  [Features]
  - An L-type DIP connector with fittings covered by a metal shell, blocking electromagnetic waves and reducing noise.

  • Sconto volumi elevati

  A partire da∗ ：	6.33 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Serie 57RE - Connettori presa ad angolo retto, leggeri, per cavo a nastro

  FUJIKURA (DDK)

  These connectors have fewer parts than 57LE series connectors and are lighter as well. (The shell and end disk latch are a single unit, as are the insert and locater.)
  
  [Features]
  • The 57RE series connectors have fewer parts than the 57LE series connectors, and are lighter as well.
  
  • Connectors on the other side fit plug connectors belonging to the 57, 57F, 57FE, and 57JE series.
  • UL application filed (File No. E72124).

  • Sconto volumi elevati

  Consegna da ：	3 giorni

• 

  Connettore DN per interfaccia piccola, a profilo basso

  Hirose Electronic

  This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
  
  [Features]
  · The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
  · The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
  · The single-action lock mechanism provides excellent operability.
  · The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
  · The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
  · The dip connector includes a snap (circuit board temporary joint) bracket.
  · Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
  · Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
  · Depending on the application, cable can be extracted in either the vertical or horizontal direction.

  • Sconto volumi elevati

  A partire da∗ ：	4.11 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  PCB saldato a pressione con connettore per cavo piatto con passo 1.27mm serie FRC-J.

  FUJIKURA (DDK)

  [Features]
  · The FRC-J Series is optimally suited for top connecting to PCBs and PCB-to-PCB connections.
  · The terminals are arranged in two-columns (2.54-mm grid).

  Consegna da ：	67 giorni

• 

  Connettore serie Han A (collegamento filo a vite)

  Harting

  This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

  • Sconto volumi elevati

  A partire da∗ ：	11.11 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore serie Han Q (collegamento filo a crimpare)

  Harting

  This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

  • Sconto volumi elevati

  A partire da∗ ：	10.03 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore serie Han D/DD (collegamento filo a crimpare)

  Harting

  Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Crimp connection for reliable connection (Models are separated using "-" rather than spaces).

  • Sconto volumi elevati

  A partire da∗ ：	6.84 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore serie Han E/EE (collegamento filo a vite/a crimpare)

  Harting

  Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Screw connection does not require special tools (Models are separated using "-" rather than spaces).

  • Sconto volumi elevati

  A partire da∗ ：	12.02 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Serie Han-Modular: Vari moduli【1-2 Pezzi per confezione】

  Harting

  It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).

  • Sconto volumi elevati

  A partire da∗ ：	8.01 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  CRC™ (Compact Robot Connector) (51233)

  MOLEX

  Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 51239/54332)

  A partire da∗ ：	4.54 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

Loading...