?* Informazioni su tempi di consegna

• 

  Connettore coassiale TNC - Serie TNC

  Hirose Electronic

  A small, locking type screw coupling coaxial connector. This connector is optimally suited to connecting to mobile radio equipment antennas due to its mechanical robustness.
  
  [Features]
  · 1. Mechanically robust due to center locking contact.
  · 2. The center wire is connected by solder and the outer wires are connected by crimped terminal connectors.
  · 3. Optimally suited to connecting to mobile radio equipment antennas.

  • Sconto volumi elevati

  A partire da∗ ：	13.40 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale N serie N

  FUJIKURA (DDK)

  [Features]
  • The N series are 50 Ù-type 7-mm coaxial connectors (inner diameter of outer conductor) with an excellent track record.
  • A wide variety is offered to fit various types of cable.
  (Note): This is not compatible with the NC series (75-Ω series), so please be careful.

  • Sconto volumi elevati

  Consegna da ：	4 giorni

• 

  Connettore coassiale serie TNC

  YUETSU SEIKI

  TNC is about the same size as the BNC connector, but employs a screw coupling method and is used for applications including wireless LAN antennae, various communication devices, and mobile base stations where vibration resistance is needed.

  • Sconto volumi elevati

  A partire da∗ ：	9.66 €
  Consegna da ：	33 giorni

  *Prezzo unitario in configurazione base

• 

  Attenuatore fisso (SMA)

  Hirose Electronic

  A fixed attenuator with SMA connector shape mating components. An abundant selection of products featuring various plug and jack combinations and attenuation volume variations is available.
  
  [Features]
  • Abundant variations of all kinds of attenuation volume: Attenuation is available in ranges from 0 - 4 dB in 0.5 dB steps, 4 - 10 dB in 1 dB steps, and 12, 13, 14, 15, 20, 26, and 30 dB models with fine level adjustment options, for an abundant selection of variations.
  • SMA type: The mating shape features a combination of plug and jack components, and the exterior is made from stainless steel with a small and durable structure.
  • Highly adjustable with high reliability: The attenuation element design uses a constant distribution circuit and metal film resistance, and V.S.W.R. provides a high level of adjustability as shown in the separate table.
  • Also, this unit has stable operation properties in a variety of different environments in terms of temperatures, humidity levels, gas conditions and other factors.

  • Sconto volumi elevati

  A partire da∗ ：	90.15 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  CN-5-J

  SATO PARTS

  [Features]
  ▪ Receptacle part of CN-5.
  · A product that is identical to CN-7017-J, CN-7041-J, and CN-7042-J.

  • Sconto volumi elevati

  A partire da∗ ：	5.96 €
  Consegna da ：	19 giorni

  *Prezzo unitario in configurazione base

• 

  Spine per cavi con connettore SMA

  TO-CONNE

  [Features]
  · A high performance compact connector for microwaves which is usable over a wide frequency range, and features superior durability.
  · The body is made of stainless steel but less expensive brass is also available

  • Sconto volumi elevati

  A partire da∗ ：	7.69 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie DIN41626

  YUETSU SEIKI

  Slide-on/slide-off type connector, compliant with DIN41626. Suitable for joining multiple coaxial lines on the backplane of communication devices and equipment.
  
  [Features]
  · This series is a Slide-on/slide-off type, coaxial connector, compliant with DIN41626.
  · Compatible with housing in compliance with DIN41626 (T8), and suitable for joining multiple coaxial lines on the backplane of communication devices and equipment.
  · In addition, a connector compliant with DIN41626 (T1) is also available for use with direct currents.

  • Sconto volumi elevati

  A partire da∗ ：	18.75 €
  Consegna da ：	48 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie MMCX

  YUETSU SEIKI

  The MMCX Connector is a compact connector featuring snap-on/pull-off attachment. Primarily used for surface-mount type connection systems, the MMCX connector is compatible with taping packages as well.
  
  [Features]
  · A compact connector featuring snap-on/pull-off attachment. Can be used in frequencies ranging up to DC 6 GHz.
  · Primarily intended for use in surface-mount type connection systems, the MMCX connector is also compatible for taping packages for such systems.
  · Straight and L-angle shaped connectors, and connectors for flexible cables, for semi-rigid cables, and for PCB mounts are available.

  • Sconto volumi elevati

  A partire da∗ ：	9.57 €
  Consegna da ：	33 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie N

  YUETSU SEIKI

  [Features]
  · N-type connectors are medium-sized screw-on connectors that are used in an extensive range of communication devices.
  · In particular, stainless steel connectors are also available for use in devices that require weatherproofing, such as the base stations of communication systems.
  · There is a type with nominal impedance of 50 Ω and one with 75 Ω, but they are not mutually interchangeable.

  • Sconto volumi elevati

  A partire da∗ ：	15.36 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale, serie SMA

  YUETSU SEIKI

  The SMA coaxial connector is a compact, high-performance connector for microwaves. The SMA connector demonstrates superior performance, with excellent reliability, stability, and mechanical characteristics. It can be used at frequencies ranging up to DC–18 GHz.
  
  [Features]
  · The SMA coaxial connector is a compact, high-performance connector for microwaves. The SMA connector demonstrates superior performance, with excellent reliability, stability, and mechanical characteristics.
  · It can be used at frequencies ranging up to DC–18 GHz. However, a model is also available that can be used for particularly high frequencies up to 25 GHz.
  · We offer compatible cables, including semi-rigid cables, semi-flexible cables, and flexible cables for supporting a wide variety of applications.
  · Available in both standard and affordable items depending on the type of body material and surface treatment.

  • Sconto volumi elevati

  A partire da∗ ：	4.63 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie 7/16

  YUETSU SEIKI

  [Features]
  · This series offers connectors with excellent toughness and waterproofing performance, and is suitable for connections in communication infrastructures (GSM, WCDMA, etc.).
  · Compatible cables can be used in high-power applications, utilizing heavy flexible coaxial lines and corrugated coaxial lines.

  • Sconto volumi elevati

  A partire da∗ ：	42.84 €
  Consegna da ：	48 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie BNC

  YUETSU SEIKI

  The BNC connector features a bayonet lock connection system that can be easily attached and detached. It is utilized in a wide range of communication and measurement applications. Nominal impedance = 50 Ω.
  
  [Features]
  · BNC connector is a connector with a bayonet lock connection system that is easy to attach and detach. The connector is available with a nominal impedance of 50 Ω and 75 Ω (BNCC type).
  · The cable length is also very adaptable for use in a wide range of communication and measurement applications.

  • Sconto volumi elevati

  A partire da∗ ：	3.39 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie BNC75Ω

  YUETSU SEIKI

  The BNC connector features a bayonet lock connection system which is easily attached and detached, and is used in a wide range of communication and measurement applications. Nominal impedance is 75 Ω.
  
  [Features]
  · The BNC connector has a bayonet lock connection system which is easy to attach and detach, and is available with a nominal impedance of 50 Ω and 75 Ω (BNCC model).
  · The cable size is also very adaptable and is being used for a wide range of communication and measurement applications.

  • Sconto volumi elevati

  A partire da∗ ：	4.48 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie LPM

  YUETSU SEIKI

  The frequency characteristics are almost identical to that of an SMA connector, and the mounting pitch is suitable for small spaces.
  
  [Features]
  · The LPM coaxial connector is approximately the same size as the SMA connector, and features a snap-on / pull-off system for attachment.
  · The frequency characteristics are almost identical to that of an SMA connector. Mounting pitch is narrow, making it suitable for cases where if a conventional SMA connector were to be used, a tightening wrench would not fit.

  • Sconto volumi elevati

  A partire da∗ ：	19.18 €
  Consegna da ：	48 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie MCX

  YUETSU SEIKI

  [Features]
  · The MCX connector is a compact connector featuring snap-on/pull-off attachment, and can be used in frequencies ranging up to DC 6 GHz.
  · Designed such that it requires smaller space than SMB connector, and can be used for various applications such as information and communication systems and cell phones.
  · Straight, L-angle shaped, for flexible cables, for semi-rigid cables, and for PCB mount are available.

  • Sconto volumi elevati

  A partire da∗ ：	8.19 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie MCX75Ω

  YUETSU SEIKI

  [Features]
  · The MCX connector (75Ω) is a compact connector featuring snap-on/pull-off attachment, and can be used in frequencies ranging up to DC 6 GHz.
  · Designed such that it requires smaller space than SMB connector, and can be used for various applications such as information and communication systems and cell phones.
  · Straight, L-angle shaped, for flexible cables, for semi-rigid cables, and for PCB mount are available.

  • Sconto volumi elevati

  A partire da∗ ：	9.57 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale, N, serie 75Ω

  YUETSU SEIKI

  [Features]
  · The N-type coaxial connector is a medium-sized connector attached by screws, and is used broadly in the field of communication equipment.
  · Stainless steel connectors are also available for use in system base stations, where endurance under harsh weather conditions is a particularly important requirement.
  · There is a type with nominal impedance of 50 Ω and one with 75 Ω but they are not mutually interchangeable.

  • Sconto volumi elevati

  A partire da∗ ：	19.82 €
  Consegna da ：	48 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie SMB

  YUETSU SEIKI

  [Features]
  ▪ The SMB connector is a compact connector featuring a snap-on/ pull-off attachment system, and can be utilized in frequencies ranging up to DC 4 GHz.
  ▪ The SMB series is suitable for applications such as GPS, mobile communications, and wireless LAM.
  ▪ Straight, L-angle, connectors for ultra-thin flexible cables, connectors for semi-rigid cables, and more are available.

  • Sconto volumi elevati

  A partire da∗ ：	3.62 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale serie SMZ

  YUETSU SEIKI

  [Features]
  · The SMZ connector can be used at frequencies up to DC 3 GHz, and is a compact connector with a nominal impedance of 75 Ω, featuring a snap-on/pull-off attachment system.
  · The SMZ connector is suitable for applications requiring low distortion rates that transfer video signals.
  · SMZ connectors do not offer compatibility for attachment with conventional SMB connectors.

  • Sconto volumi elevati

  A partire da∗ ：	13.42 €
  Consegna da ：	33 giorni

  *Prezzo unitario in configurazione base

• 

  Connettori BNC

  Hirose Electronic

  Coaxial connector and BNC connector can be used with a wide variety of devices. · There is a rich selection of product types.
  
  [Features]
  ・The most common 50Ø-type cable: BNC series is the most widely used 50Ø cable (there is also the 75Ø type).
  ・Bayonet lock for quick attachment and detachment: bayonet lock mechanism for easy attachment and detachment.
  ・Applicable cables: complete coaxial cables with an outer diameter of Ø3 - Ø8 (RG-55・58/U, etc.)
  ・Applicable regulations: Japan Defense Agency (DSPC6202).
  ▪ Japanese Industrial Regulations (JISC5412): based on MIL regulations.

  • Sconto volumi elevati

  A partire da∗ ：	6.68 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale C05, serie UM

  Hirose Electronic

  This is a quick-lock type coaxial connector. · There is a rich selection of product types.
  
  [Features]
  · Optimized for ultra-thin coaxial cables: ultra-small coaxial connector optimized for ultra-thin coaxial cables with high reliability.
  · Lock system: The lock system is the quick lock type system.
  · The quick lock type is regulated by Japan Defense Agency Standard DSPC6205.
  · Connection system: The connection system is the extremely easy-to-use and reliable crimp attachment system.

  • Sconto volumi elevati

  A partire da∗ ：	3.54 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Connettori MMCX

  Hirose Electronic

  The MMCX connector is a small push-on lock coaxial connector.
  
  [Features]
  · Simple push-on format used for easy insertion and extraction.
  · Able to load PCMCIA type II cards: MMCX-LR-SMT (40) have a thickness of 3.51 mm and can be loaded to the back side of type II cards.
  · Moreover, if a 0.36 mm degree of eccentricity from the central card line is used when mounting a card on the circuit board mounting surface, the central card axis and central connector axis will be aligned.
  · Ultra-thin cable compatibility: RG type high frequency coaxial cable... RG-178B/U (⌀1.8), ... RG-316/U (⌀2.59MAX), ⌀1.48 (single layer shield) fluorine resin coaxial cable, ⌀1.32 (double layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.13 (single layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.37 (single layer shield) ultra-thin fluoride resin coaxial cable.
  · Dual terminal connection with other series: Capable of dual terminal connection with U.FL, N, BNC, HRM, and TNC series.
  · Highly coordinated: high frequency traits are realized with a voltage standing wave ratio (V.S.W.R.) of less than 1.2 at a frequency of up to DC 6 GHz (possessing representative value and not compatible with all products).
  ・Compatibility: the opening is standard, allowing for mating with MMCX connectors.

  • Sconto volumi elevati

  A partire da∗ ：	5.75 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore SMA serie HRM

  Hirose Electronic

  This is a MIL standard coaxial connector, SMA connector. We were the first company to successfully develop this . With high reliability and different variations, it is used with a wide range of equipment.

  • Sconto volumi elevati

  A partire da∗ ：	3.97 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale piccolo SMT, serie E.FL

  Hirose Electronic

  This small coaxial cable occupies a circuit board area of 9.4 mm².
  
  [Features]
  ・Occupied circuit board area: Compared to the manufacturer of the H.FL series, the occupied circuit board area is reduced by approximately 49% - 56% with an occupied area of 9.2 mm².
  ・Ultra-thin fluorine resin cable: bendable Ø0.81 and Ø1.32 ultra-thin fluorine resin cables are used in an effort to make laying cable easier.
  ・High coordination: the ability to handle high-frequency waves up to DC 2 GHz and a V.S.W.R. of 1.3 or less.
  ・Automatic mount compatibility: the receptacle's embossed packaging allows for automatic mounting.
  ・Easy connector removal: connectors can be easily removed using a removal tool.
  ・Easy mate confirmation: a definite lock feel can be used to confirm mating, even with ultra small models.

  • Sconto volumi elevati

  A partire da∗ ：	0.76 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale piccolo SMT serie H.FL【100 Pezzi per confezione】

  Hirose Electronic

  This is a small coaxial connector for circuit board mounting. It is low-profile with a height of 3 mm on mating.

  • Sconto volumi elevati

  A partire da∗ ：	74.43 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale ultra-miniaturizzato con altezza di 1.4mm - Serie W.FL

  Hirose Electronic

  A low-profile, ultra-miniature coaxial connector with 1.4mm mating height. Supports up to DC 6 GHz.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Sconto volumi elevati

  A partire da∗ ：	1.21 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Interruttore coassiale (DC - 6GHz) piccolo per controllo, senza alogeni con altezza 1.6mm

  Hirose Electronic

  An ultra-small coaxial switch for circuit checking with a mount height of 1.6 mm. 2.7 mm × 2.7 mm space saving design. Corresponds to halogen-free specifications.
  
  [Features]
  · Low insertion losses: 6 GHz TYP when not mated. Low insertion losses of 0.1 dB.
  · Space-efficient design: 2.7 mm × 2.7 mm space-efficient design.
  · Low profile: Working towards profile with height of 1.6 mm.
  · Lightweight: Lightweight, weighing 0.025 g.
  · Long life: Sufficient reliability ensured for 100 circuit insertions and extractions.
  · Wide range of use: Usable with frequencies up to DC 6 GHz.
  · Prevents solder oozing: signal terminals are plated and a nickel barrier is placed between the connection and mounting portions in order to prevent solder oozing for a variety of soldering styles.
  · Corresponds to automatic mounting: embossed tape allows for automatic mounting.
  · Also available with absorbent cap.
  · Halogen free: The receptacle does not use chlorine or bromine.

  • Sconto volumi elevati

  A partire da∗ ：	27.29 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Interruttore coassiale (DC - 10GHz) per interfaccia ultra piccola con altezza 2.5mm

  Hirose Electronic

  An ultra-small coaxial switch with a mount height of 2.5 mm. Can also be used as an external antenna connector in addition to circuit checking.
  
  [Features]
  · Wide range of use (compatible with up to DC 10 GHz): Usable with frequencies up to DC 10 GHz.
  · Low insertion losses: 1 GHz TYP 0.08 dB, 2 GHz TYP 0.12 dB when not mated.
  · Space saving: The outer dimensions are 3.5 mm x 3.1 mm to save space.
  · Low profile: Working towards profile with MAX height of 2.5 mm.
  · Lightweight: Lightweight, weighing 0.043g.
  · Long life: a life span of 12,000 insertions and extractions.
  · Compatible with automatic mounting: embossed tape allows for automatic mounting.
  · Self alignment: ±0.5 mm guide amount when mating with plug.
  · Beryllium and halogen free: the receptacle does not use beryllium, chlorine, or bromine.

  • Sconto volumi elevati

  A partire da∗ ：	16.79 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Interruttore coassiale (DC - 6GHz) per interfaccia piccola, altezza 3.9mm

  Hirose Electronic

  An ultra-small coaxial switch with a mount height of 3.9 mm. Can also be used as an external antenna connector in addition to circuit checking.
  
  [Features]
  · Low insertion losses: 1 GHz TYP when not mated. 0.08 dB 2GHz TYP. Low insertion losses of 0.10 dB.
  · Space saving: The outer dimensions are 5.8 mm x 5.4 mm to save space.
  · Low profile: Working towards profile with height of 3.9mm.
  · Lightweight: Lightweight, weighing 0.11g.
  · Long life: a life span of 12,000 insertions and extractions.
  · Supports automatic mounting: embossed tape allows for automatic mounting.
  · Wide range of use, corresponds to up to DC 6 GHz: Usable with frequencies up to DC 6 GHz.
  ・Lead free: both the receptacle and plug are lead free out of consideration for environmental issues.
  ・Furthermore, the construction takes flux oozing into consideration.
  · Self alignment: ±0.5 mm guide amount when mating with plug.

  • Sconto volumi elevati

  A partire da∗ ：	0.65 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale piccolo con blocco a scatto rapido, serie MSS

  Hirose Electronic

  Utilizing a slide snap lock method, both the internal and external conductors are in almost perfect contact, providing excellent durability. There are two types of wiring methods used: crimp wire connection and screw clamps. Compliant with Japan Defense Agency DSPC-6206.
  
  [Features]
  • The Japan Defense Agency has enacted a specifications document: DSPC-6206.
  • Every aspect of performance for mid-size connectors is specifically demonstrated, and although the size is exceedingly miniaturized, performance is comparable to mid-sized high frequency connectors.
  • A slide snap locking system is utilized within the external conductor, and this conductor has near complete contact and also demonstrates excellent vibration resistance.
  • Wire connection work can be conducted in a thoroughly simplified and assured manner using one of these two methods: the crimp wire connection method or the screw clamp method.

  • Sconto volumi elevati

  A partire da∗ ：	5.15 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale in miniatura, a profilo basso - Serie U.FL

  Hirose Electronic

  The de facto standard for low-profile miniature coaxial connectors. Used for various devices, including many types of antenna connections, wireless modules, and more.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Sconto volumi elevati

  A partire da∗ ：	0.53 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Terminale di estremità non riflettente (SMA), serie HRM-TM

  Hirose Electronic

  This is a highly functional and non-reflective end terminal using our independent high-frequency wave coordination technology. The opening is an SMA connector.
  
  [Features]
  · High performance: an end-terminal device that achieves an ultra wide range and ultra high frequency coordination without reflection using independent, high-frequency wave coordination technology.
  · With SMA connector: using externally-equipped stainless steel and a hard SMA connector (HRM series).

  • Sconto volumi elevati

  A partire da∗ ：	23.29 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Serie CN-5-P

  SATO PARTS

  [Features]
  ▪ Works with the plug of CN-5.
  · A product that is identical to CN-6-P.
  · The colors are red and black. Safety and reliability are assured because it is manufactured in Japan.

  A partire da∗ ：	9.72 €
  Consegna da ：	15 giorni

  *Prezzo unitario in configurazione base

• 

  Serie CN-6-J

  SATO PARTS

  [Features]
  ▪ Receptacle part of CN-6. Safe and reliable product made in Japan.

  • Sconto volumi elevati

  A partire da∗ ：	6.62 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Serie CN-6-P

  SATO PARTS

  [Features]
  ▪ Works with the plug of CN-6.
  ▪ CN-5-P and CN-6-P are identical products.
  · The colors are red and black. Safety and reliability are assured because it is manufactured in Japan.

  • Sconto volumi elevati

  A partire da∗ ：	9.72 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  CN-7017-J

  SATO PARTS

  [Features]
  ▪ Receptacle part of CN-7017.
  ▪ This is a product which is the same as CN-5-J, CN-7041-J, and CN-7042-J and it is reliable because it is made in Japan.

  • Sconto volumi elevati

  A partire da∗ ：	5.96 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  CN-7017-P

  SATO PARTS

  [Features]
  ▪ Works with the plug of CN-7017.
  · A safe and reliable product that is made in Japan and is identical to CN-7017-P, CN-7018-P.

  • Sconto volumi elevati

  A partire da∗ ：	8.20 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  CN-7018-J

  SATO PARTS

  [Features]
  ▪ Receptacle part of CN-7018. Safe and reliable product made in Japan.

  A partire da∗ ：	5.17 €
  Consegna da ：	15 giorni

  *Prezzo unitario in configurazione base

• 

  CN-7018-P

  SATO PARTS

  [Features]
  ▪ Works with the plug of CN-7018.
  · A safe and reliable product that is made in Japan and is identical to CN-7017-P, CN-7018-P.

  • Sconto volumi elevati

  A partire da∗ ：	8.20 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Serie CN-7041-P

  SATO PARTS

  [Features]
  ▪ Works with the plug of CN-7041.
  ▪ CN-7041-P and CN-7045-P are identical products.
  · The colors are red and black. Safety and reliability are assured because it is manufactured in Japan.

  A partire da∗ ：	3.10 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale N ‑ Serie N

  Hirose Electronic

  A medium-sized coaxial connector with a screw coupling lock for broadband (up to DC 10 GHz). We stock a wide array of variations, such as plugs, jacks, and adapters, etc.
  
  [Features]
  · 1. Constant Impedance Connector - 50 Ω Series
  · The N Series are medium-sized constant impedance connectors suitable for medium-sized coaxial cables (75 Ω Series is also available).
  · 2. Lock-type Screw Coupling.
  · A screw coupling with a locking mechanism for secure locking.
  · 3. Compatible Cables
  · RG-5/6/8/9/U, etc.
  · 4. Compatible Standards
  · Japan Defense Agency (DSPC6201).
  · Japan Industrial Standards (JISC5411).
  · MIL Standards Compliant.

  • Sconto volumi elevati

  A partire da∗ ：	10.15 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Connettore coassiale SMB da 75Ω serie 27CP

  FUJIKURA (DDK)

  [Features]
  · The 27CP series of connectors correspond to a 75 Ω version of the 27DP series of connectors (50 Ω type).
  · This connector, which is representative of small 75 Ω connectors, is frequently used in applications such as interfaces inside devices.
  · The push-on method makes it easy to connect or disconnect.
  · This part is not compatible with the 27DP series.

  • Sconto volumi elevati

  Consegna da ：	4 giorni

• 

  Serie 27DP - Connettori coassiali SMB

  FUJIKURA (DDK)

  Connectors are made to be compliant with the SMB type defined in MIL-PRF-39012. Can be used for miniaturization and increasing the density of communications equipment
  
  [Features]
  • The 27DP series correspond to connectors made to be compliant with the SMB (Sub-Miniature Type B) type defined in MIL-PRF-39012.
  · A 50 Ω connector for fine cabling that enables miniaturization and increased density of communications equipment.
  • The coupling mechanism is push-on, and cables are mounted by crimping or soldering.

  • Sconto volumi elevati

  A partire da∗ ：	7.16 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Serie 31 - Prese isolate BNC (montaggio a pannello)

  FUJIKURA (DDK)

  [Features]
  • These insulated receptacles are panel mounted and connected to BNC series (plug) connectors.
  · Reliable insulation is achieved between the external conductor of the connector and the panel.
  ▪ The ground terminal is connected to the external conductor and integrated with the mold adjacent to the central conductor. Hence, it is easy to handle.
  • The round-pin contact types (31-10-CF and 31-10-CAu-CF) are UL-listed (UL File No. E72124).

  • Sconto volumi elevati

  A partire da∗ ：	2.63 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Presa isolata BNC serie BNC-RD (montaggio su scheda stampata)

  FUJIKURA (DDK)

  [Features]
  ·This insulated receptacle is a printed circuit board mounting type that mates with the BNC series (plugs).
  ·Reliable insulation achieved between the external conductor of the connector and the panel.
  ▪ The ground terminal is connected to the external conductor and integrated with the mold adjacent to the central conductor. Hence, it is easy to handle.
  ·As a VA product, this receptacle's contact uses sound or shape (press contact).
  ·The receptacle can be mounted on a printed circuit board either vertically or horizontally.
  ·The height from the printed circuit board is low, at 14.0 mm when the receptacle is mounted horizontally on the printed circuit board.
  · The product can be used in an extensive range of applications, including computers, communication devices, and medical devices.

  • Sconto volumi elevati

  A partire da∗ ：	0.70 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

Loading...