Filiera

Numero di dati da visualizzare
30
45
60
Ordina
Giorni spedizione
  • Tutti gli articoli
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  1. 1
Marchio
Serie prodotto
A partire da
Consegna da
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)
  • Raccomandazione

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

  • Raccomandazione

Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

    Planet Cutter Series NC-Planet Cutters WX-PNC

      Planet Cutter Series Super Planet DR-PNAC

        DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

          TS Coated Carbide Threading Cutter, for Internal Metric Threads

            TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

              TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                Micro Screw Cutting Tools

                  Planet Cutter Series MC-Planet Cutters PNGT

                    Planet Cutter Series Super Hard Planet Cutters OT-PNGT

                      Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC

                        Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC

                          Planet Cutter Series NC Planet Cutters for Steel WX-ST-PNC

                            Planet Cutter Series Spiral Super Hard Planet Cutters OT-SFT-PNGT

                              Carbide MC-Helical Cutter MC-CSLC

                              Marchio

                              MISUMI

                              OSG

                              OSG

                              OSG

                              MISUMI

                              MISUMI

                              MISUMI

                              MISUMI

                              NS TOOL

                              OSG

                              OSG

                              OSG

                              OSG

                              OSG

                              OSG

                              YAMAWA MFG

                              Serie prodotto

                              TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                              Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

                              Planet Cutter Series NC-Planet Cutters WX-PNC

                              Planet Cutter Series Super Planet DR-PNAC

                              DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                              TS Coated Carbide Threading Cutter, for Internal Metric Threads

                              TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                              TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                              Micro Screw Cutting Tools

                              Planet Cutter Series MC-Planet Cutters PNGT

                              Planet Cutter Series Super Hard Planet Cutters OT-PNGT

                              Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC

                              Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC

                              Planet Cutter Series NC Planet Cutters for Steel WX-ST-PNC

                              Planet Cutter Series Spiral Super Hard Planet Cutters OT-SFT-PNGT

                              Carbide MC-Helical Cutter MC-CSLC

                              A partire da

                              77.16 €

                              *Prezzo unitario in configurazione base

                              Sconto volumi elevati

                              67.09 €

                              *Prezzo unitario in configurazione base

                              Sconto volumi elevati

                              162.99 €

                              *Prezzo unitario in configurazione base

                              318.52 €

                              *Prezzo unitario in configurazione base

                              84.42 €

                              *Prezzo unitario in configurazione base

                              Sconto volumi elevati

                              113.17 €

                              *Prezzo unitario in configurazione base

                              Sconto volumi elevati

                              176.42 €

                              *Prezzo unitario in configurazione base

                              Sconto volumi elevati

                              137.50 €

                              *Prezzo unitario in configurazione base

                              Sconto volumi elevati

                              67.14 €

                              *Prezzo unitario in configurazione base

                              216.50 €

                              *Prezzo unitario in configurazione base

                              238.65 €

                              *Prezzo unitario in configurazione base

                              349.42 €

                              *Prezzo unitario in configurazione base

                              184.35 €

                              *Prezzo unitario in configurazione base

                              168.60 €

                              *Prezzo unitario in configurazione base

                              251.48 €

                              *Prezzo unitario in configurazione base

                              238.33 €

                              *Prezzo unitario in configurazione base

                              Consegna da 3 giorni 4 giorni 4 giorni 6 giorni 3 giorni 3 giorni 5 giorni 5 giorni 4 giorni 4 giorni 6 giorni 6 giorni 6 giorni 6 giorni 6 giorni 6 giorni
                              Screw TypesMeterMeter / unifiedMeter / unified / Taper for PipeMeterMeterMeterMeterMeterOtherMeter / Taper for Pipe / Parallel for PipesMeter / Taper for Pipe / Parallel for PipesMeterMeterMeterMeterMeter / Taper for Pipe / Parallel for Pipes
                              Screw size (Nominal)M3 ~ M20--M6 ~ M12M3 ~ M16M3 ~ M12M2 ~ M12M1.4 ~ M20S0.1 ~ S1.4--M6 ~ M12---06510X28R ~ 200505N300M
                              Pitch (P), Number of Threading(mm)0.5 ~ 2.50.25 ~ 321 ~ 281 ~ 1.750.5 ~ 20.5 ~ 1.750.4 ~ 1.750.3 ~ 2.50.025 ~ 0.31 ~ 191 ~ 281 ~ 1.750.5 ~ 31 ~ 1.751 ~ 30.5 ~ 3
                              Chamfer threads (Lcf)----------------
                              Tool Material TypeCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCobalt HSSCarbideCarbideCarbideCarbideCarbideCarbide
                              work materialLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]
                              Tap TypeThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutter
                              Hole typeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind hole-For through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind hole
                              Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable
                              Coating TypeTiAlNFor High Hardness (Silicon Group) / OtherTiAlNTiAlNDLCFor High Hardness (Silicon Group)TiAlNTiAlNTiAlNTiNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlN
                              Overall Length (L)(mm)57 ~ 1154060 ~ 12062 ~ 8957 ~ 9248 ~ 7458 ~ 7339 ~ 1054580 ~ 21060 ~ 14562 ~ 8960 ~ 12060 ~ 10560 ~ 14570 ~ 140

                              Loading...

                              1. 1

                              Categorie relative a Filiera