Indicatori di livello

?* Informazioni su tempi di consegna e prezzi

• 

  Livelle a bolla d’aria a vite, viti di montaggio

  GANTER

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	50.76 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Screw-on levels

  GANTER

  Screw-on levels GN 2282 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.
  The spirit levels are aligned in relation to the finished reference surface so that the bubble is centered in the middle of the marking lines once the horizontal position of the contact surface in the longitudinal direction is reached.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	14.38 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Bull´s eye levels

  GANTER

  Bull´s eye levels GN 2280 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.
  The mounting threads offset by 120° allow the spirit levels to be aligned in relation to the mounting surface. An alignment ball at the bottom surface of the adjustment plate serves as tilting point. Specific tightening torques of the bolts allow to be achieved, so that the bubble is located inside the marking ring once the horizontal alignment is reached.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	15.32 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Bull´s eye levels

  GANTER

  Due to their cylindrical design, bull´s eye levels GN 2281 are suitable for installation in plates and housings where they serve to check the horizontal position of jigs, machines and devices.
  Bull´s eye levels are not aligned, i.e. there is no reference to the external outline of the level. The vertical position must be ensured by aligning the holding building element.
  The black housing of the version ALS creates a reflection at the edge of the bubble which significantly improves the readability. Version KT is available with contrast ring inside the air level housing(Identification no. 2) which creates the same effect.
  Alternatively, the contrast can also be improved by a dark surface inside the mounting bore hole.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.08 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Sbandometri, viti di montaggio

  GANTER

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	56.32 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

Loading...