Adesivi

?* Informazioni su tempi di consegna e prezzi

• 

  WEICON Helix Mixing Nozzle

  WEICON

  WEICON Helix Mixing Nozzle for Easy-Mix Metal

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	3.18 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Mixing Nozzles PE-PP 45

  WEICON

  WEICON Mixing Nozzles for Easy-Mix PE-PP 45

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	4.16 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Flex 310 M HT 200

  WEICON

  High temperature resistant
  WEICON Flex 310 M HT 200 adhesive and sealant is highly temperature resistant, overpaintable (wet in wet), sandable, has outstanding ageing resistance, and is free of silicone, isocyanate, halogens or solvents.
  Flex 310 M HT 200 is an elastic adhesive on an MS polymer basis which can be used for structural bonding in industrial applications.
  The high temperature resistance also makes it possible to bond and seal components needing to be subsequently thermal-coated.
  WEICON Flex 310 M HT 200 can be used in metal construction, in ventilation and air conditioning systems, carriage, container, wagon and vehicle construction and in all applications where silicones or products containing silicones are not suitable.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	22.50 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Thread Sealing Cord DF 175

  WEICON

  For metal and plastic threads
  WEICON DF 175 is a patented thread sealing cord made of 100% PTFE that seals almost all metal and plastic threads permanently and safely. WEICON DF 175 reliably compensates the intermediate space on the threads and creates a PTFE film in the required thickness during the screwing procedure. This film is extremely resistant to almost all chemicals, even the most aggressive solvents, caustic agents, and acids.
  WEICON DF 175 is non-flammable and operates reliably in a temperature range from -200°C (-328°F) to +240°C (+464°F). In contrast to other sealing materials, for which the fabric solely acts as a base for the actual sealant, WEICON DF 175 itself is the sealing material. A separation of the base material and the sealing material over the service life of the screw connection is thus excluded.
  WEICON DF 175 is very economical: 1 roll replaces up to 20 rolls of PTFE tape (12 mm x 0,1 mm x 12 m).
  WEICON DF 175 is durable for an unlimited period of time and stays permanently soft and elastic.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	21.00 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Quadro Mixing Nozzle

  WEICON

  WEICON Static Mixer Nozzle Quadro for all Easy-Mix types (except "Metal") 1:1 50 ml

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	3.05 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Hand Dispenser D50 E-Mix 1:1

  WEICON

  WEICON Easy-Mix Hand Dispenser D50 1:1 for 50 ml cartridge

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	57.51 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Piston for Hand Dispenser PE-PP 45

  WEICON

  WEICON Special Piston for Dispenser Pistol Easy-Mix PE-PP 45

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	9.77 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Easy-Mix PU 90

  WEICON

  High strength, extremely fast-curing, highly viscous, very short pot life of 90 seconds
  WEICON Easy-Mix PU-90 structural adhesive is high-strength, extremely fast-curing, highly viscous, and can be sanded and painted over after approx. 30 minutes. It is weather resistant, resistant to chemicals and temperature resistant from -55°C to +125°C (-67 to +257°F) and has a very short pot life of around 90 seconds.
  WEICON PU-90 can be used to bind numerous materials such as composite materials, plastics, polyurethane, epoxies, polyester, metals, wood and ceramics to themselves and among each other with high tensile, shear and peel strength.
  PU-90 can be used in plastic technology, machine construction, model and mould making, metal construction, ship and boat building, carriage and vehicle construction, trade show and exhibition construction and in many other applications.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	22.59 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Easy-Mix PU 240

  WEICON

  High strength, extremely fast-curing, highly viscous, very short pot life of 240 seconds
  WEICON Easy-Mix PU-240 structural adhesive is high-strength, extremely fastcuring, highly viscous, and can be sanded and painted over after approx. 30 minutes. It is weather resistant, resistant to chemicals and temperature resistant from -55°C to +125°C (-67 to +257°F) and has a very short pot life of around 240 seconds.
  PU-240 can be used to bind numerous materials such as composite materials, plastics, polyurethane, epoxides, polyester, metals, wood and ceramics to themselves and among each other with high tensile, shear and peel strength.
  WEICON PU-240 can be used in plastic technology, machine construction, model and mould making, metal construction, ship and boat building, carriage and vehicle construction, trade show and exhibition construction and in many other applications.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	22.59 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 20

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, low viscosity, very fast cure
  WEICON Contact VA 20 has low viscosity (< 20 mPa•s) and hardens very quickly. VA 20 is suited for the bonding of rubber and plastics and also for precisely fitted metal/plastic joints.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	9.21 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 100

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, medium viscosity, slightly longer cure
  WEICON Contact VA 100 is a universal type for the bonding of metals, plastic and rubber, both to and among each other.
  VA 100 is ideal for the "do-it-yourself" area, but can also be used in many areas of industry.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	5.58 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 110

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, medium viscosity, slightly longer curing
  The special feature of the product is its NSF approval in accordance with ANSI Standard 61 - Drinking Water System components. Thus, VA 110 also meets the highest standards and can be used in sensitive areas such as in the harmaceutical industry, in the manufacturing of cosmetics, in the food industry, in the manufacturing of toys or jewelry industry.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	21.13 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 1401

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, medium viscosity, fast-curing
  WEICON Contact VA 1401 has medium viscosity (100-150 mPa•s) and hardens quickly. It shows good results on fabric, paper, cardboard, cartons, foam rubber and large-pored elastomers.
  VA 1401 is a universal type for the bonding of metals, plastics and rubber, both to themselves and among each other.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	11.22 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 300

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, higher viscosity, longer curing
  WEICON Contact VA 300 has a higher viscosity (200-300 mPa•s) and a longer curing time. It is particularly suited for absorbent and porous products such as wood, cork, leather and ceramics.
  VA 300 is also suited for the bonding of metals, plastics and rubber, both to themselves and among each other.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	11.22 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 1500

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, high viscosity, slow-curing
  WEICON Contact VA 1500 is highly viscous (1000-1500 mPa•s) and has a slower curing time. The product is suited for the bonding of rubber and plastics and can also be used on absorbent and .porous materials such as wood, cork, leather and ceramics.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	9.21 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 8312

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, low viscosity, very fast-curing, ISEGA-certified
  WEICON Contact VA 8312 has low viscosity (20-40 mPa•s) and hardens very quickly. VA 8312 is suited for the bonding of various rubber materials such as solid rubber or cellular rubber, plastics and EDPM elastomers.
  In combination with WEICON CA-Primer, VA 8312 can also be used for polyolefines (PE-polyethylene, PP-polypropylene). In combination with WEICON Contact Filler, VA 8312 is suited for the instant bonding and filling of cracks, clefts, holes and uneven surfaces.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	9.21 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 8406

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics low viscosity, very fast-curing
  WEICON Contact VA 8406 has low viscosity (20-50 mPa•s) and hardens very quickly. It is is suited for the fast fixing and bonding of various rubber materials such as solid rubber or cellular rubber, plastics and EPDM elastomers requiring quick fixing.
  In combination with WEICON CA-Primer, VA 8406 can also be used for polyolefines (PE-polyethylene, PP-polypropylene) and for PTFE and silicones.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	11.22 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 1460

  WEICON

  Cyanoacrylate Adhesive for special requirements, medium viscosity, longer cuing, low odour and “blooming”
  VA 1460 has a medium viscosity (120-200 mPa•s) and a reduced “blooming” effect. It hardens less quickly, is low in odour when processing and less susceptible to moisture effects after curing.
  WEICON Contact VA 1460 is suited for the bonding of the most diverse products. The product can be used in numerous industrial applications.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	30.89 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 1403

  WEICON

  Cyanoacrylate Adhesive for special requirements, high viscosity, slow-curing, low odour and “blooming”
  WEICON Contact VA 1403 is highly viscous (1100-1800 mPa•s), low in odour when processing and has a reduced “blooming” effect. It hardens slowly and is less susceptible to moisture effects after curing.
  VA 1403 is suited for the clean and visually attractive bonding of the most diverse products.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	30.89 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 1408

  WEICON

  Cyanoacrylate Adhesive for special requirements, low viscosity, fast-curing, low odour and “blooming”
  WEICON Contact VA 1408 has a low viscosity (20-40 mPa•s) and a reduced “blooming” effect. It hardens quickly, is low in odour when processing and less susceptible to moisture effects after curing. The product is suited for the clean and visually attractive bonding of the most diverse products.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	30.89 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VM 20

  WEICON

  Cyanoacrylate Adhesive for metals, low viscosity, very fast-curing
  WEICON Contact VM 20 has a low viscosity (20-40 mPa•s) and hardens very quickly. It is suited for all types of metal bonds, especially for the bonding of precisely fitted parts in serial production.
  VM 20 can be used in the metalworking industry, in machine construction, in housing and apparatus engineering and in many other applications.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	19.50 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VM 120

  WEICON

  Cyanoacrylate Adhesive for metals, medium viscosity, slower curing, a short-term realignment of parts is possible
  WEICON Contact VM 120 has a medium viscosity (100-130 mPa•s) and a longer curing time allowing short-term position corrections of the parts to be bonded.
  WEICON Contact VM 120 is suited for all types of metal bonds.
  WEICON Contact VM 120 can be used in the metalworking industry, in machine construction, in housing and apparatus engineering and in many other applications.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	19.50 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VM 2000

  WEICON

  Cyanoacrylate Adhesive for metals, high viscosity, slow-curing, allows realignment of parts
  WEICON Contact VM 2000 is highly viscous (1700-2000 mPa•s) and hardens slowly, which enables position correction of the parts to be bonded.
  VM 2000 is suited for all types of metal bonds and can also be used on absorbent and porous products.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	19.50 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Contact GEL

  WEICON

  Cyanoacrylate Adhesive for special requirements, pasty (highly thixotropic), very slow-curing = position correction
  Contact Gel is pasty (highly thixotropic; 60000-90000 mPa•s) and hardens very slowly. By using WEICON Activator Spray, the cure time can be reduced.
  WEICON Contact Gel is suited for porous surfaces and higher tolerance gaps and can be used on vertical surfaces. Positioning is also possible after the parts have been joined.
  WEICON Contact Gel is suited for the bonding of the most diverse products.
  WEICON Contact Gel can be used both in the hobby sector and in model building. It can also be used in many different industrial applications.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	17.11 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 2500 HT

  WEICON

  Cyanoacrylate Adhesive for special requirements, high temperature resistant, high viscosity, slow-curing, residual elasticity after curing, high peel and impact resistance
  WEICON Contact VA 2500 HT is highly viscous (2000-3000 mPa•s) and temperature resistant between -50°C (-58°F) and +135°C (+275°F). It hardens slowly with residual elasticity and has high peel and impact
  strength. Thanks to its curing with residual elasticity, WEICON Contact VA 2500 HT is particularly suitable under changing climatic conditions. It is insensitive even under a longer influence of humidity. VA 2500 HT is suited for the bonding of the most diverse
  rubber materials and plastics and also for metal/plastic joints.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	19.50 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 250 Black

  WEICON

  Cyanoacrylate Adhesive for special requirements, rubber-filled, high temperature resistant, high viscosity, slow-curing, residual elasticity after curing, high peel and impact resistance
  VA 250 Black is highly viscous (2000-3000 mPa•s) and temperature resistant between -50°C (-58°F) and +135°C (+275°F). It hardens slowly and with residual elasticity, is rubberfilled and black, and has high peel and impact strength.
  Thanks to its curing with residual elasticity, WEICON Contact VA 250 Black is particularly suitable under changing climatic conditions. It is insensitive even under a longer influence of humidity. It is best suited for the bonding of diverse rubber materials such as solid rubber or cellular rubber, plastics and metal/plastic joints.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	19.50 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON VA 30 Black

  WEICON

  Cyanoacrylate Adhesive for special requirements, rubber-filled, high temperature resistant, medium viscosity, longer curing, residual elasticity after curing, high peel and impact resistance
  WEICON Contact VA 30 Black has medium viscosity (300 mPa•s) and is temperature resistant between -50°C (-58°F) and +135°C (+275°F). It has a longer curing time, is rubber-filled and black, hardens with residual elasticity and has high peel and impact strength. Thanks to its curing with residual elasticity, WEICON Contact VA 30 Black is particularly suitable under changing climatic conditions. It is insensitive even under a longer influence of humidity.
  VA 30 Black is ideally suited for the bonding of diverse rubber materials such as solid rubber or cellular rubber, plastics and metal/plastic joints.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	19.50 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Contact Filler

  WEICON

  Fillers for instant bonding and filling-in of clefts and cracks, holes as well as unlevelled surfaces in conjunction with WEICON Contact Adhesive VA 8312.
  Contact Filler should be applied in layers: adhesive - filler - adhesive
  After curing is completed, the material can be sanded and overpainted.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	8.58 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Dosing Tips size 0

  WEICON

  For exact, economic and point-to-point applications of WEICON Contact adhesives.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	2.58 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Dosing Tips Type A

  WEICON

  Dosing tip for all WEICON Easy-Mix types. WEICON RK-7000/-7100/-7200, RK 7300 for even finer dosing.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	2.58 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Silicone A

  WEICON

  Acetate cross-linking
  WEICON Silicone A adhesive and sealant contains no solvents, has acetate-crosslinking properties, is strong, permanently elastic, resistant to ageing and chemicals, temperature resistant up to +200°C (+392°F), extremely elastic (breaking elongation >500%) and can be used universally. Silicone A adheres very well to steel, aluminium, glass, ceramics, and many additional materials.
  WEICON Silicone A can be used in machine and system construction, ventilation and air conditioning systems, in the energy and electrical industry, in exhibition construction and shopfitting and in many additional industrial applications.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	9.76 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Silicone HT-300

  WEICON

  High temperature resistant
  WEICON HT 300 adhesive and sealant is red, high-temperature resistant (+300°C/+572°F), free of solvents, strong, and has acetatecross-linking properties. It is resistant to weathering, ageing and chemicals and is extremely elastic (breaking elongation of approx. 500%).
  HT 300 is particularly suitable for heatexposed bonds and seals and adheres very well to steel, aluminium, glass, ceramics and many additional materials.
  HT 300 can be used in industrial furnaces, flue gas systems, heating installations, exhaust gas routing, heating cabinets and in many additional areas.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	12.87 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Black-Seal

  WEICON

  Extremely resistant against oil and grease
  WEICON Black-Seal adhesive and sealant is black, high-temperature resistant (+280°C/+536°F), free of solvents, strong, oilresistant,
  grease-resistant, pressure-resistant, resistant to ageing and extremely elastic (breaking elongation of approx. 500%).
  Black-Seal is suitable for bonding and sealing in applications where particularly high oil and grease resistance is required.
  WEICON Black-Seal can be used on gearbox, valve and casing covers, oil sumps, water pumps, gears and axles, flanges, tanks and containers, and in many other areas.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	13.52 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Silicone F

  WEICON

  Liquid, self-levelling
  WEICON Silicone F casting and sealing compound is liquid, self-levelling, spreadable, free of solvents and has acetate-crosslinking properties. It is resistant to weathering and ageing, temperature resistant up to +180°C (+356°F), extremely elastic (breaking elongation of approx. 370%) and can be used universally.
  Silicone F can be specially used for elastic bonds, insulation and impregnation and even for the sealing and casting (max. 10 mm) of technical components. It adheres well to steel, aluminium, glass, ceramics, and many additional materials.
  Silicone F can be used in machine and system construction, in plastic processing, the energy and electrical industry, in exhibition construction and shopfitting and in many additional industrial areas.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	26.31 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Cartridge Gun “Standard”

  WEICON

  For low and medium viscosity adhesives. Suitable for standard cartridges up to 310 ml.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	19.91 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Cartridge Gun “Special”

  WEICON

  Professional quality. Recommended for medium and high viscosity adhesives. Suitable for standard cartridges up to 310 ml.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	60.50 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Compressed air cartridge gun

  WEICON

  For low and medium viscosity materials (310 ml cartridges). 1.45 kN thrust at 6.8 bar operating pressure.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	465.83 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Flex 310 PU

  WEICON

  Polyurethane
  WEICON Flex 310 adhesive and sealant is permanently elastic, strong, overpaintable, and resistant to weather, UV rays, freshwater
  and salt water. It is free of silicone.
  Flex 310 is an elastic adhesive and sealant on Polyurethane basis (PUR) for the bonding and sealing of numerous materials such as metals, plastics, ceramics, wood, glass and stone.
  WEICON Flex 310 can be used in tank and apparatus engineering, carriage, container and vehicle construction, in ventilation and air conditioning systems, the energy and electrical industry and in all applications where silicones or products containing silicones are not suitable.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	17.41 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Flex 310 M Classic

  WEICON

  Suitable for universal use
  WEICON Flex 310 M Classic adhesive and sealant is strong, overpaintable (wet in wet), sandable, has outstanding aging stability and good resistance to UV rays. It is resistant to freshwater and salt water and is free of silicone, isocyanate, halogens or solvents.
  The product has an ISEGA certificate and can be used as an adhesive in food technology.
  Flex 310 M Classic is an elastic adhesive on an MS polymer basis and is suitable for the bonding of metals, many plastics, ceramic, wood, glass and stone.
  WEICON Flex 310 M Classic can be used in metal construction, tank and apparatus engineering, carriage, vehicle and container construction, ventilation and air conditioning systems, in the electrical industry, yacht and boat construction and in all applications where silicones or products containing silicones are not suitable.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	19.91 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Flex 310 M 2K

  WEICON

  Fast-curing
  The WEICON Flex 310 M 2 K adhesive and sealant is very strong, non-corrosive, overpaintable (wet in wet), sandable, weather-resistant, resistant to UV rays and is free of silicone, isocyanate, or solvents.
  Flex 310 M 2 K is a strong 2-component system on a hybrid polymer basis which enables fullsurface bonding of larger parts and which can be used to fill gaps of up to ten millimetres. It is suitable for the bonding of almost all materials such as metal and many plastics.
  WEICON Flex 310 M 2 K can be used in metal construction, tank and apparatus engineering, machine and system construction, in the furniture industry, in ventilation and air conditioning systems, in the electrical industry, yacht and boat construction and in all applications where
  silicones or products containing silicones are not suitable.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	50.48 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Flex 310 M Crystal

  WEICON

  Crystal-clear curing
  WEICON Flex 310 M Crystal adhesive and sealant is transparent, strong, overpaintable (wet in wet), sandable, has outstanding aging stability and good resistance to UV rays. It is resistant to freshwater and salt water and contains no silicone, isocyanate, halogens or solvents.
  WEICON Flex 310 M Crystal has an ISEGA certificate and can be used as an adhesive in food technology. WEICON Flex 310 M Crystal is an elastic adhesive on an MS polymer basis and is suitable for the bonding of glass, PC*, PMMA* and acrylic glass* (* = tension-free bonding only), metals, many plastics, ceramics, wood and stone. The product is crystal clear after curing and is particularly suited for elastic joints where the adhesive should or must not be visible.
  Flex 310 M Crystal can be used in plastic processing, metal construction, tank and apparatus engineering, in ventilation and air conditioning systems, the electrical and lighting industry, in exhibition stand construction and shopfitting and in all applications where silicones or products containing silicones are not suitable.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	21.19 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Fast-Bond

  WEICON

  Fast-curing, one-component structural and assembly adhesive for universal use on polyurethane basis (PUR)
  Fast-Bond structural and assembly adhesive is strong, overpaintable, sandable, and resistant to weathering, UV rays, freshwater and salt water. It is free of silicone or solvents.
  WEICON Fast-Bond is suitable for the bonding of MDF panels, wood panels, chipboards, fibre and plaster boards, concrete, marble, natural and artificial stone, ceramics, gypsum, metals and rigid foams.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	20.48 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Mixing Nozzle Flex 310 M 2K

  WEICON

  For Flex 310 M 2 K fast curing

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	7.45 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Flex 310 M Liquid

  WEICON

  Liquid, self-levelling
  Flex 310 M Liquid is a self-levelling,1-component casting and coating mass based on polyoxypropylene.
  Flex 310 M Liquid is permanently elastic and can be painted over after curing. The flexible adhesive and sealing substance cures odourless; is weather and UV-resistant, has excellent anti-aging properties and is free of silicone.
  Flex 310 M Liquid can be used in diverse applications for adhesion and sealing of very different materials such as metals, many plastics, ceramics, wood, glass or stone and for insulation and impregnation.
  The flexible adhesive and sealing substance can also be used in other industrial areas, such as in tank and apparatus construction, in car bodywork, container and vehicle construction, in pipeline and fittings construction, in the energy and electrical industries, in sound insulation and insulation technology and in plastics technology.

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	19.91 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  WEICON Flex + Bond

  WEICON

  Highly elastic and strong
  WEICON Flex+bond is strong, permanently elastic, temperature resistant from -40°C to +90°C (up to +130°C for short periods), weather resistant, resistant to UV rays, overpaintable (wet in wet), sandable, and resistant to ageing and salt water. It is free of silicone, isocyanate, halogens and solvents. WEICON Flex+bond has an ISEGA certificate and can be used as an adhesive in foodstuff technology.
  WEICON Flex+bond can be used to bond nearly all materials to themselves and among each other such as metal, wood, plastic, glass, and ceramics.

  • Sconto volumi elevati

  Seleziona per confrontare

  › Configura ora
  A partire da∗ ：	11.90 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

Loading...