Type Code Seach | *NOT READY*: #CODE

Suggerimento keywords

Suggerimenti codice prodotto

Prodotti fuori produzione

GANTER Maniglie

Numero di dati da visualizzare: 30; 45; 60

Ordina per:

Giorni spedizione	Tutti gli articoli Stesso giorno 1 giorno o meno 2 giorni o meno 3 giorni o meno 4 giorni o meno 5 giorni o meno 6 giorni o meno 7 giorni o meno 8 giorni o meno 9 giorni o meno

?* Informazioni su tempi di consegna e prezzi

Cabinet "U" handles, Steel, for welding

GANTER

The manufacturing process (bending) of the cabinet "U" handles GN 425.3 allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	3.44 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Aluminium

GANTER

Aluminium-Cabinet "U" handles GN 425 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

A partire da^∗ ：	6.68 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Tubular handles, with power switching function

GANTER

Tubular handles GN 332 with power switching function are suitable for unlocking safety tumblers in rotating, detachable or side-sliding safety devices which must be closed in order to safeguard the required operational safety.
By integrating functions such as emergency stop, start, release, reset and LED status display, this tubular handle allows the machine to be monitored and operated directly at the door or gate.
Tubular handles GN 332 save mounting and installation work, are attractively designed and optimise ergonomy: the switching and operating functions are located precisely where they are needed.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	422.14 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

„U“ handles

GANTER

The dimensisons of the „U“ handles GN 423 have been designed to match a 19“ rack and enclosure layout.
The values of the height unit HE given in the table refer to the corresponding front panel heights of the housings.
Handle bar and handle shanks are interconnected via a plug-type connection, with the effect that special lengths are easily realised.
Thanks to the fixing screws included in the set, the „U“ handles are easily and economically mounted.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	6.90 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Arch handles, Steel

GANTER

Arch handles, Steel

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	4.54 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Flat cabinet "U" handles, Aluminium

GANTER

Cabinet handles GN 668 are produced from aluminium extrusions.
They can be mounted either from the back (type A) or by means of the handle base from the operator’s side (type B).
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	4.98 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Folding handles with recessed tray

GANTER

The folding handles with recessed tray GN 425.8 are used if the handle is to protrude by a maximum of 3 mm when folded down.
In type A, the folding handle is held in both end positions by spring-loaded thrust pieces.
In type B, the folding handle always spring-returns to the starting position after being released, preventing it from protruding with potentially interfering effect.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	35.88 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Inclined cabinet "U" handles, Aluminium

GANTER

Inclined cabinet "U" handles GN 565.2 are produced from profiled aluminum
extrusions. Produced from profiled aluminium extrusions their special features are their rigidity and ergonomical shaping.
The angled contact surface allows improved access even in tight spaces such as corners.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.
In type B lens screws, hexagon nuts and washers are included parts of the order.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	8.62 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Stainless Steel-Cabinet "U" handles

GANTER

Stainless Steel-Cabinet "U" handles GN 425 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
The stainless steel design version should be given preference.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	8.10 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Stainless Steel-Cabinet "U" handles

GANTER

Cabinet "U" handles GN 427.5 are produced from profiled extrusions.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	11.30 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Tubular handles with power switching function

GANTER

Tubular handles GN 331 with power switching function are suitable for unlocking safety tumblers in rotating, detachable or side-sliding safety devices which must be closed in order to safeguard the required operational safety.
By integrating functions such as emergency stop, start, release, reset and LED status display, this tubular handle allows the machine to be monitored and operated directly at the door or gate.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	409.84 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Arch handles, Aluminium

GANTER

The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	12.98 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Arch handles, Aluminium

GANTER

Arch handles, Aluminium

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	63.50 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles

GANTER

GN 428 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the manufacturing process, special designs can be supplied even in relatively small quantities.
For type B, socket button head screws, hexagon nuts and washers are included parts of the order.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	27.62 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Cabinet "U" handles for welding

GANTER

GN 426.3 cabinet “U” handles are produced through bending. This allows special lengths or special geometries with the same r and s dimensions to be delivered even in comparatively small unit quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	12.74 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles Steel / Polyurethane foam

GANTER

The shock absorbing casing of the GN 564 “U” handles made of Thermoplastic polyurethane (TPU) offers protection from injuries, while its elliptical shape give it a nice hold.

The steel core guarantees high durability.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	19.40 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Cabinet "U" handles, Aluminium

GANTER

Aluminium-Cabinet "U" handles GN 425.1 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	6.54 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Aluminium

GANTER

Cabinet "U" handles GN 426.1 are produced from profiled aluminium extrusions.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	21.14 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Aluminium

GANTER

GN 426 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the production process, special designs can be supplied even in relatively small quantities.
In addition to the standard surfaces, these cabinet „U“ handles are also available with a functional coating.
The WSA version has a powder coating based on zinc molybdate, which gives it antimicrobial properties. The principle of action, which is activated by the presence of moisture, demonstrably reduces the growth of viruses, bacteria, and fungi within 24 hours, so that contaminated surfaces ultimately have less than 0.2% of the original number of microbes.
Standard elements with antimicrobial plastic coating are primarily used in the health care sector and in public buildings, such as airports, train stations, stadiums, etc.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	12.42 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Aluminium

GANTER

Cabinet "U" handles GN 427 are produced from profiled aluminum extrusions.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	5.42 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Aluminium

GANTER

A special characteristic of the Handle GN 559 is the thumb rest pad on the front of the leg. At the same time the extended leg offers an open ended version with wide access.
The fastening bores of type C are closed by a cap following the handle installation. The cap is included in the delivery contents.
Handles GN 559 are known for their high stability. They are fixed by two M8 screws whereby type A offers two alternative hole centers (l2 or l3).

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	13.36 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Aluminium

GANTER

GN 565.1 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the production process, special designs can be supplied even in relatively small quantities.
In addition to the standard surfaces, these cabinet „U“ handles are also available with a functional coating.
The SWU version is coated with a highly weather-resistant and UV-protective powder coating system, making this version excellent for outdoor use.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	8.30 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Aluminium

GANTER

Cabinet "U" handles GN 565.3 are suitable for applications where lower „lifting forces are required such as on lids or protective machine covers.
The countersunk holes of type B allow fixing with self tapping screws or countersunk rivets.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	6.48 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Aluminium

GANTER

GN 565 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the production process, special designs can be supplied even in relatively small quantities.
In addition to the standard surfaces, these cabinet „U“ handles are also available with a functional coating.
The SWU version is coated with a highly weather-resistant and UV-protective powder coating system, making this version excellent for outdoor use.
The WSA version has a powder coating based on zinc molybdate, which gives it antimicrobial properties. The principle of action, which is activated by the presence of moisture, demonstrably reduces the growth of viruses, bacteria, and fungi within 24 hours, so that contaminated surfaces ultimately have less than 0.2% of the original number of microbes.
Standard elements with antimicrobial plastic coating are primarily used in the health care sector and in public buildings, such as airports, train stations, stadiums, etc.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	6.54 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Aluminium

GANTER

The installation of cabinet "U" handles GN 728 can be carried out from the back (Type A) as well as from the operator’s side (Type B). The hole centers dimension is identical on all variants. As a result they can be mounted in pairs opposite each other.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	6.56 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Cast iron

GANTER

Cabinet "U" handles GN 225 are simple, very rugged handles.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	10.50 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Hygienic Design

GANTER

GN 429 cabinet „U“ handles are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead spaces. The high quality finish prevents adherence of dirt and facilitates cleaning.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

A partire da^∗ ：	28.72 €
Consegna da ：	4 giorni

*Prezzo unitario in configurazione base

Cabinet "U" handles, Steel

GANTER

Cabinet "U" handles GN 425 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
The chrome-plated design is only conditionally suitable for outdoor use. The stainless steel design version should be given preference.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	4.86 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Cabinet "U" handles, Steel

GANTER

Cabinet "U" handles GN 425 Ø 6, Ø 8 and Ø 10 are supplied with two location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
The chrome-plated design is only conditionally suitable for outdoor use. The stainless steel design version should be given preference.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	4.20 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Edge handles, Aluminum / Zinc die casting

GANTER

The tube extrusion for edge handles GN 481 is formed in such a way that two countersunk self tapping screws are used to cut their own counter thread in the extrusion to hold the end caps in position.
If an edge handle for a cabinet of non-standard length is required, a standard extrusion can simply be shortened to fit.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	13.02 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Finger handles, Steel

GANTER

Finger handles, Steel

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	4.90 €
Consegna da ：	4 giorni

*Prezzo unitario in configurazione base

Folding handles, Steel

GANTER

Folding handles GN 425.2 are used in such applications where minimal protrusion is required.
In both positions the handle is retained by a spring loaded detent.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	25.30 €
Consegna da ：	4 giorni

*Prezzo unitario in configurazione base

Folding handles, Steel

GANTER

Folding handles GN 425.5 are used in places where the handle must not protrude or protrude only a short distance.

The handle is locked in place in the resting position by means of a spring-loaded (cup springs) thrust bolt.

The static load capacity value given in the table is an approximate value which, if exceeded, may result in permanent deformation or fracture of the plastic attachment part. The folding handle GN 425.2 may be used as an alternative.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	24.78 €
Consegna da ：	4 giorni

*Prezzo unitario in configurazione base

Handle legs for tubular handles, Zinc die casting

GANTER

Handle legs GN 333.8 can be used for longer tubes or higher loads of tubular handles.
They can be used for tube Ø 28 of the tubular handles GN 333 and GN 333.2.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	16.90 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Handle legs for tubular handles, Zinc die casting

GANTER

Handle legs GN 333.9 can be used for longer tubes or higher loads of tubular handles.
They can be used for tube Ø 28 of the tubular handles GN 333.1 and GN 333.3.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	16.76 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Inclined Stainless Steel-Cabinet "U" handles

GANTER

Inclined Stainless Steel-Cabinet "U" handles GN 565.7 are produced from profiled Stainless Steel
extrusions. Their special features are their rigidity and ergonomical shaping.
The angled contact surface allows improved access even in tight spaces such as corners.
The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	42.62 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Ledge handles

GANTER

Typical applications for ledge handles GN 430 include swivel or sliding doors on protective doors and equipment. They are also suitable for use as drawer handles.
The screw channel for screw sizes M6 (extruded aluminium) allows an optional number of fixing screws in any position within the dimension l2.
Special lengths can be manufactured from relatively small quantities upwards.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	7.10 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Ledge handles, Aluminium

GANTER

A typical field of application is on hinged protective doors on machinery and installations.
Manufactured from aluminum extrusion allows special lengths and material sold by the meter to be realised easily.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	6.52 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Ledge handles, with lettering block

GANTER

Typical applications for ledge handles with lettering block GN 430.1 include swivel or sliding doors on protective doors and equipment. They are also suitable for use as drawer handles.

The screw channel for screw sizes M6 (extruded aluminium) allows an optional number of fixing screws in any position within the dimension l2.

Special lengths are easily realised because the ledge handle needs no further machining when mounted.

In the design with lettering block, the end cap when delivered is mounted on one side such that the paper / film strip supplied can be lettered and pushed into the groove provided.
Go to www.ganter-griff.de/service to open a ZIP-file with different documents (Word®, Open Office, PDF) which you can use to create lettering and labels.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	9.28 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Oval tubular handles Mounting from operator‘s side

GANTER

Oval tubular handles GN 334.1 are highly stable.
The handle tube can be mounted without any further machining, allowing special lengths to be realised easily.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	29.22 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Oval tubular handles, Aluminum / Plastic

GANTER

Characteristic for the design of the GN 366 oval handles: Tube and handle leg are made in the same elliptical profile.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	39.52 €
Consegna da ：	5 giorni

*Prezzo unitario in configurazione base

Oval tubular handles, Aluminum / Zinc die casting

GANTER

Oval tubular handles GN 334 are attractive in design and highly stable.
The handle tube can be mounted without any further machining, allowing special lengths to be realised easily.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	30.92 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Stainless Steel-Arch handles

GANTER

Stainless Steel-Arch handles

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	5.68 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base

Stainless Steel-Arch handles

GANTER

The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	62.88 €
Consegna da ：	4 giorni

*Prezzo unitario in configurazione base

Stainless Steel-Cabinet "U" handles

GANTER

Stainless Steel-Cabinet "U" handles GN 425 Ø 6, Ø 8 and Ø 10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.

The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

Sconto volumi elevati

Dati CAD disponibili in formato 2D / 3D

A partire da^∗ ：	6.08 €
Consegna da ：	Stesso giorno

*Prezzo unitario in configurazione base


Marchio
Serie prodotto
CAD
A partire da^∗
Consegna da ：
Tipo corpo principale
Categoria superficie
A U
Passo P(mm)
Materiale corpo principale
Pitch P2 (Short Side) * Se 4 fori(mm)
Altezza H(mm)
Funzione aggiuntiva
Corpo principale, trattamento superficie
Metodo di montaggio
Spessore maniglia D(mm)
Profilo sezione trasversale maniglia


Marchio	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Serie prodotto	Cabinet "U" handles, Steel, for welding	Cabinet "U" handles, Aluminium	Tubular handles, with power switching function	„U“ handles	Arch handles, Steel	Flat cabinet "U" handles, Aluminium	Folding handles with recessed tray	Inclined cabinet "U" handles, Aluminium	Stainless Steel-Cabinet "U" handles	Stainless Steel-Cabinet "U" handles	Tubular handles with power switching function	Arch handles, Aluminium	Arch handles, Aluminium	Cabinet "U" handles	Cabinet "U" handles for welding	Cabinet "U" handles Steel / Polyurethane foam	Cabinet "U" handles, Aluminium	Cabinet "U" handles, Aluminium	Cabinet "U" handles, Aluminium	Cabinet "U" handles, Aluminium	Cabinet "U" handles, Aluminium	Cabinet "U" handles, Aluminium	Cabinet "U" handles, Aluminium	Cabinet "U" handles, Aluminium	Cabinet "U" handles, Aluminium	Cabinet "U" handles, Cast iron	Cabinet "U" handles, Hygienic Design	Cabinet "U" handles, Steel	Cabinet "U" handles, Steel	Edge handles, Aluminum / Zinc die casting	Finger handles, Steel	Folding handles, Steel	Folding handles, Steel	Handle legs for tubular handles, Zinc die casting	Handle legs for tubular handles, Zinc die casting	Inclined Stainless Steel-Cabinet "U" handles	Ledge handles	Ledge handles, Aluminium	Ledge handles, with lettering block	Oval tubular handles Mounting from operator‘s side	Oval tubular handles, Aluminum / Plastic	Oval tubular handles, Aluminum / Zinc die casting	Stainless Steel-Arch handles	Stainless Steel-Arch handles	Stainless Steel-Cabinet "U" handles
CAD	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
A partire da^∗	3.44 € *Prezzo unitario in configurazione base Sconto volumi elevati	6.68 € *Prezzo unitario in configurazione base Sconto volumi elevati	422.14 € *Prezzo unitario in configurazione base Sconto volumi elevati	6.90 € *Prezzo unitario in configurazione base Sconto volumi elevati	4.54 € *Prezzo unitario in configurazione base Sconto volumi elevati	4.98 € *Prezzo unitario in configurazione base Sconto volumi elevati	35.88 € *Prezzo unitario in configurazione base Sconto volumi elevati	8.62 € *Prezzo unitario in configurazione base Sconto volumi elevati	8.10 € *Prezzo unitario in configurazione base Sconto volumi elevati	11.30 € *Prezzo unitario in configurazione base Sconto volumi elevati	409.84 € *Prezzo unitario in configurazione base Sconto volumi elevati	12.98 € *Prezzo unitario in configurazione base Sconto volumi elevati	63.50 € *Prezzo unitario in configurazione base Sconto volumi elevati	27.62 € *Prezzo unitario in configurazione base Sconto volumi elevati	12.74 € *Prezzo unitario in configurazione base Sconto volumi elevati	19.40 € *Prezzo unitario in configurazione base Sconto volumi elevati	6.54 € *Prezzo unitario in configurazione base Sconto volumi elevati	21.14 € *Prezzo unitario in configurazione base Sconto volumi elevati	12.42 € *Prezzo unitario in configurazione base Sconto volumi elevati	5.42 € *Prezzo unitario in configurazione base Sconto volumi elevati	13.36 € *Prezzo unitario in configurazione base Sconto volumi elevati	8.30 € *Prezzo unitario in configurazione base Sconto volumi elevati	6.48 € *Prezzo unitario in configurazione base Sconto volumi elevati	6.54 € *Prezzo unitario in configurazione base Sconto volumi elevati	6.56 € *Prezzo unitario in configurazione base Sconto volumi elevati	10.50 € *Prezzo unitario in configurazione base Sconto volumi elevati	28.72 € *Prezzo unitario in configurazione base Sconto volumi elevati	4.86 € *Prezzo unitario in configurazione base Sconto volumi elevati	4.20 € *Prezzo unitario in configurazione base Sconto volumi elevati	13.02 € *Prezzo unitario in configurazione base Sconto volumi elevati	4.90 € *Prezzo unitario in configurazione base Sconto volumi elevati	25.30 € *Prezzo unitario in configurazione base Sconto volumi elevati	24.78 € *Prezzo unitario in configurazione base Sconto volumi elevati	16.90 € *Prezzo unitario in configurazione base Sconto volumi elevati	16.76 € *Prezzo unitario in configurazione base Sconto volumi elevati	42.62 € *Prezzo unitario in configurazione base Sconto volumi elevati	7.10 € *Prezzo unitario in configurazione base Sconto volumi elevati	6.52 € *Prezzo unitario in configurazione base Sconto volumi elevati	9.28 € *Prezzo unitario in configurazione base Sconto volumi elevati	29.22 € *Prezzo unitario in configurazione base Sconto volumi elevati	39.52 € *Prezzo unitario in configurazione base Sconto volumi elevati	30.92 € *Prezzo unitario in configurazione base Sconto volumi elevati	5.68 € *Prezzo unitario in configurazione base Sconto volumi elevati	62.88 € *Prezzo unitario in configurazione base Sconto volumi elevati	6.08 € *Prezzo unitario in configurazione base Sconto volumi elevati
Consegna da ：	Stesso giorno	Stesso giorno	5 giorni	Stesso giorno	Stesso giorno	Stesso giorno	5 giorni	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	5 giorni	Stesso giorno	5 giorni	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	Stesso giorno	4 giorni	Stesso giorno	Stesso giorno	5 giorni	4 giorni	4 giorni	4 giorni	5 giorni	5 giorni	Stesso giorno	Stesso giorno	Stesso giorno	5 giorni	5 giorni	5 giorni	Stesso giorno	Stesso giorno	4 giorni	Stesso giorno
Tipo corpo principale	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Categoria superficie	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
A U	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Passo P(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Materiale corpo principale	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Pitch P2 (Short Side) * Se 4 fori(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Altezza H(mm)	64 ～ 250	55 ～ 300	200 ～ 300	55 ～ 235	64 ～ 192	130 ～ 412	100 ～ 120	112 ～ 160	55 ～ 250	55 ～ 235	200 ～ 300	160 ～ 192	350 ～ 450	250 ～ 800	150 ～ 600	112 ～ 160	55 ～ 250	200 ～ 500	200 ～ 400	55 ～ 235	162	100 ～ 196	120 ～ 160	100 ～ 500	120 ～ 180	-	125 ～ 200	55 ～ 250	32 ～ 300	100 ～ 500	30 ～ 40	100 ～ 180	100 ～ 180	-	-	112 ～ 128	110 ～ 500	110 ～ 140	110 ～ 500	200 ～ 800	200 ～ 600	200 ～ 800	64 ～ 192	160 ～ 192	32 ～ 300
Funzione aggiuntiva	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Corpo principale, trattamento superficie	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Metodo di montaggio	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Spessore maniglia D(mm)	8 ～ 20	8 ～ 16	-	-	10	-	-	-	8 ～ 12	-	-	-	-	28 ～ 36	20 ～ 30	-	8 ～ 12	20 ～ 28	20 ～ 28	-	-	-	-	-	-	18 ～ 25	12 ～ 16	8 ～ 12	6 ～ 16	30	8 ～ 10	-	-	28	28	-	-	-	-	36	36	36	10	20	6 ～ 16
Profilo sezione trasversale maniglia	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Seleziona per:

Stock

- Stock Items Included
Ripristina

Limitare la ricerca specificando Spec./Dim.

Tipo corpo principale
- Tipo di superficie
- Incorporato
- Per portelli a pavimento
- Con piastra
- Maniglia rotante
- Profilo speciale
- Componenti annessi
Immagini

Ripristina

Categoria superficie
- Profilo U
- Profilo ad arco
- Profilo L
- Profilo T
Immagini

Ripristina

A U
- Dritto
- Deformazione
- Attacco laterale apposito
- Con montaggio
Immagini

Ripristina

Passo P(mm)
5

10

15

17

18

20

22

23

25

30

32

37.5

39

40

42

44

45

48

48.5

50

53

55

56

58

60

62

64

65

66

68

70

72.5

74

75

75.5

76

78

80

82

84

85

86

87

88

90

90-95

93.5

94

96

98

99

100

102

104

105

106

107

108

109

110

112

112-117

114

115

116

117

118

118±0.2

119

120

122

125

126

128

129

130

132

133

135

136

138

140

147.5

148

150

152

158

160

161

164

165

166

170

172

177-182

179

180

184

187

188

190

192

196

198

200

210

215

218

220

228

235

238

239

240

250

253

253.5

260

269

270

288

300

302

310

340

350

360

370

375

380

400

425

440

450

460

470

480

500

540

560

570

600

640

700

740

800

840

940
Disegno

Ripristina

Materiale corpo principale
EN 1.4301 Equiv.

ABS

Acciaio

Acciaio inox

Alluminio

Alluminio + resina

Altro

EPDM

Elastomero

Lega di Zinco

Nylon

Ottone

PVC

Plastica

Poliammide

Policarbonato

Polipropilene

Polistirene

Poliuretano

Resina fenolica

Zinco pressofuso
Ripristina

Pitch P2 (Short Side) * Se 4 fori(mm)
32

38

65
Ripristina

Altezza H(mm)
0.7

0.8

2

2.5

3.5

4.5

8

8.5

9

15

15.5

16

17

18

19

20

21

21.5

22

23

23.5

25

26

27.5

28

29

30

31

31.5

32

33

33.5

34

35

36

37

37.75

38

38.5

39

39.25

40

41

41.4

41.5

42

43

43.3

43.5

44

44.5

45

45.5

46

47

48

48.5

49

50

50.2

50.5

51

52

52.75

53

53.4

53.5

54

55

55.5

56

57

57.5

58

59

60

60.75

61

61.5

62

62.25

63

64

65

66

66.5

67

68

69

70

71

75

76

78

80

85

86

87

87.75

88

90

96

98

100

110

112

116

117

120

125

128

130

132

140

150

160

162

164

170

179

180

190

192

196

200

210

235

242

250

262

292

300

312

350

362

392

400

412

450

492

500

592

600

800

1000
Disegno

Ripristina

Funzione aggiuntiva
- Non fornito
- Ripiegabili
- Con stoccaggio
- Con blocco
- Altro
Ripristina

Corpo principale, trattamento superficie
- Non fornito
- Cromatura
- Anodizzato trasparente
- Burattatura
- Lucidatura
- Granigliatura
- Spazzolatura
- Vernice elettrostatica
- Vernice a forno
- Ossido nero
- Rivestimento
- Sabbiatura
- Superficie specchio
- Lucidatura elettrolitica
- Nichelatura
- Altro
- Cromatura
Ripristina

Metodo di montaggio
- Filettature
- Maschiati
- Foro rotondo
- Saldatura
- Attacchi a innesto
- Altro
Ripristina

Spessore maniglia D(mm)
4

5

5.5

6

7

7.7

8

9

9.7

10

11

12

13

14

15

16

17

18

19

19.5

20

21

21.6

22

22.5

23

24

25

26

27

27.4

28

29

30

31

32

33

35

36

38

41

48
Disegno

Ripristina

Profilo sezione trasversale maniglia
- Profilo rotondo
- Profilo quadrato
- Altro
Ripristina

Limitare la ricerca specificando il produttore

- MISUMI (60)
- Prodotti convenienti ()
- TAKIGEN (143)
- ROHDE (127)
- KIPP (124)
- ESCO (109)
- GANTER (73)
- ELESA (43)
- NABEYA BI-TECH (32)
- KONISHI MFG (12)
- HALDER (8)
- TRUSCO NAKAYAMA (7)
- FLAIR (2)
- HILOGIK (2)
- MARUKI HARDWARE (1)
Ripristina