MANYO TOOLS Utensili（Spindle types：BT40）

[Features]· Various types are available, compatible with all sorts of drilling. For use with a Morse taper drill installed

[Features]· Various types are available, compatible with all sorts of cutters. Can be used for a wide variety of applications, from roughing to finishing.

[Features]· Various types are available, compatible with all sorts of cutters. Can be used for a wide variety of applications, from roughing to finishing.

[Features]· Compatible with all sorts of cutters. For Sandvik or Seco milling cutters.

[Caratteristiche] E' disponibile un'ampia scelta di tipi per varie frese. Quantità minima ordinabile: 1 pezzo. Per frese a spianare SANDVIK e SECO. È disponibile un'ampia scelta di tipi per diverse frese.

[Features]· For squaring, flattening, and high accuracy finishing of surfaces.· Produces very little in the way of unevenness on the finished surface.· Optimal for deep cross-section surfaces of molds.· Saves machining time with rough finishing.· High rigidity, high speed specification.

[Features]· For squaring, flattening, and high accuracy finishing of surfaces.· Produces very little in the way of unevenness on the finished surface.· Optimal for deep cross-section surfaces of molds.· Saves machining time with rough finishing.· High rigidity, high speed specification.

[Features]· Exponentially improves the efficiency of molds and parts processing.· Head exchangeable type that makes tool management easy.· A full lineup of BT and HSK, from short to long shank arbors.

Supporta diversi pezzi con una varietà di tipi. Forma e tipo di mandrino/supporto: BT

A high precision collet chuck with great endurance. Fully supports the Synchro Tap. Highly balanced body: Grinding applied to the minimum parts needed for high-speed rotation body balance. Can be used with oil holes.

[Features]· Supports center-through oil holes.· An angled body for high rigidity.· Ideal for milling and drilling.

[Caratteristiche] La gamma di prodotti comprende BT40 e BT50. Forma del mandrino/stelo: BT Tipo di mandrino/stelo: BT Numero di mandrini/steli: 40 Tipo di prodotto: BT40 -C2 (mm): 90.

[Features]· Lightly tightening the clamp screw alone makes the wedge work powerfully on the flat part of the end mill, tightly locking the end mill· The wedge tightening system guarantees maximum rigidity and accuracy· No Sliding or Dropping Out for Extra Heavy Cutting· No hammer is required for tightening and loosening (only light tightening is required, as cutting force will automatically tighten the endmill)· The wedge tightens the flat section of the end mill, with gripping force several times higher than the side lock holder

[Features]· T Series: Use the quick change holder with general-purpose milling cutters for quick-change exchange of machining center tools.· After using a generic milling cutter, it returns to MC use· BT Series: This product allows BT50 machines to assist the work of BT40.· It produces BT 50 ⇔ BT 40 ⇔ BT 30 reuse.