• A causa del tifone in Giappone / Tokyo, alcuni prodotti potrebbero riportare ritardi nella consegna. Ci scusiamo per l'inconveniente e ringraziamo per la comprensione.
  • A causa di motivi tecnici, il pagamento con carta di credito non è temporaneamente possibile. Ci scusiamo per l'inconveniente.

MISUMI Utensili per fori filettati

Eseguire la ricerca specificando la categoria di classe più bassa

Numero di dati da visualizzare
30
45
60
Ordina per:
Giorni spedizione
  • Tutti gli articoli
  • Stesso giorno
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • 7 giorni o meno
  • 8 giorni o meno
  • 9 giorni o meno
  • 10 giorni o meno
  • 18 giorni o meno
  1. 1
Marchio
Serie prodotto
A partire da
Consegna da :
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

    TiN Coated High-Speed Steel Spiral Tap

      MT Series High-Speed Steel Spiral Tap

        High-Speed Steel Hand Tap

          Ratchet Model, Hand Tap Wrench T-Model

            TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

              DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                  TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                    TS Coated Carbide Threading Cutter, for Internal Metric Threads

                      TiN Coated High-Speed Steel Roll Tap

                        Carbide Spiral Tap

                          Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported

                            High-Speed Steel Spiral Tap

                              TiN Coated High-Speed Steel Point Tap

                                High-Speed Steel Point Tap

                                  Carbide Hand Tap

                                    Stainless Steel Machining Tap, Point Tap / Spiral Tap

                                      MT Series High-Speed Steel Point Tap

                                      Marchio

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      MISUMI

                                      Serie prodotto

                                      TiN Coated High-Speed Steel Spiral Tap【1-5 Pezzi per confezione】

                                      MT Series High-Speed Steel Spiral Tap

                                      High-Speed Steel Hand Tap【10 Pezzi per confezione】

                                      Ratchet Model, Hand Tap Wrench T-Model

                                      TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                                      DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                                      TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                                      TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                                      TS Coated Carbide Threading Cutter, for Internal Metric Threads

                                      TiN Coated High-Speed Steel Roll Tap【5 Pezzi per confezione】

                                      Carbide Spiral Tap

                                      Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pezzi per confezione】

                                      High-Speed Steel Spiral Tap【10 Pezzi per confezione】

                                      TiN Coated High-Speed Steel Point Tap【1-5 Pezzi per confezione】

                                      High-Speed Steel Point Tap【10 Pezzi per confezione】

                                      Carbide Hand Tap

                                      Stainless Steel Machining Tap, Point Tap / Spiral Tap

                                      MT Series High-Speed Steel Point Tap

                                      A partire da

                                      13.09 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      9.01 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      24.54 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      23.17 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      86.20 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      90.13 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      179.41 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      139.83 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      115.08 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      36.97 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      23.73 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      35.13 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      47.42 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      12.64 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      41.31 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      23.73 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      49.12 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      8.69 €

                                      *Prezzo unitario in configurazione base

                                      Sconto volumi elevati

                                      Consegna da : 3 giorni Stesso giorno 3 giorni 5 giorni 3 giorni 3 giorni 5 giorni 5 giorni 3 giorni 3 giorni 3 giorni 3 giorni 3 giorni 3 giorni 3 giorni 3 giorni 5 giorni Stesso giorno
                                      Screw TypesMeterMeterMeter-MeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                                      Screw size (Nominal)M3 ~ M10M2 ~ M24M3 ~ M10M3~8 ~ M8~12M3 ~ M20M3 ~ M16M2 ~ M12M1.4 ~ M20M3 ~ M12M3 ~ M10M3 ~ M10M2 ~ M12M2 ~ M12M3 ~ M10M2 ~ M12M3 ~ M10M2 ~ M8M2 ~ M24
                                      Pitch (P), Number of Threading(mm)0.5 ~ 1.50.4 ~ 30.5 ~ 1.5-0.5 ~ 2.50.5 ~ 20.4 ~ 1.750.3 ~ 2.50.5 ~ 1.750.5 ~ 1.50.5 ~ 1.50.4 ~ 1.750.4 ~ 1.750.5 ~ 1.50.4 ~ 1.750.5 ~ 1.50.4 ~ 1.250.4 ~ 3
                                      Chamfer threads (Lcf)1.5 P ~ 2.5 P2.5 P1.5 P ~ 9 P------2 P ~ 4 P1.5 P ~ 2.5 P2.5 P2.5 P5 P5 P1.5 P ~ 3 P-5 P
                                      Tool Material TypeVanadium High-Speed SteelCobalt HSSVanadium High-Speed Steel-CarbideCarbideCarbideCarbideCarbideVanadium High-Speed SteelCarbidePowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelCarbideVanadium High-Speed SteelCobalt HSS
                                      work materialLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]-Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]
                                      Tap TypeSpiral TapSpiral TapHand TapTap wrenchThread cutterThread cutterThread cutterThread cutterThread cutterRoll tapSpiral TapSpiral TapSpiral TapPoint tapPoint tapHand TapSpiral Tap / Point tapPoint tap
                                      Hole typeFor blind holeFor blind holeFor through hole / For blind hole-For through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor blind holeFor blind holeFor through holeFor through holeFor through hole / For blind holeFor through hole / For blind holeFor through hole
                                      Coating Y/NAvailableNANA-AvailableAvailableAvailableAvailableAvailableAvailableNANANAAvailableNANANANA
                                      Coating TypeTiNNon-Coated--TiAlNDLCTiAlNTiAlNFor High Hardness (Silicon Group)TiN---TiN---Non-Coated
                                      Overall Length (L)(mm)46 ~ 15040 ~ 12046 ~ 75-57 ~ 11557 ~ 9258 ~ 7339 ~ 10548 ~ 7446 ~ 7546 ~ 7540 ~ 8240 ~ 8246 ~ 15040 ~ 8246 ~ 7540 ~ 7040 ~ 120

                                      Loading...

                                      1. 1

                                      Categorie relative a Utensili per fori filettati