Giorni spedizione |
|
---|
?* Informazioni su tempi di consegna
Punta Aqua Drill EX Flat AQDEXZ
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
A partire da∗ : | 56.55 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
High-grade powdered high-speed steel and SG coating allows this HSS drill to have the longest life possible.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.
A partire da∗ : | 7.96 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Punta per usi generici su acciaio/ghisa/alluminio SDP
NACHI(FUJIKOSHI)
A general-purpose drill used in the widest ranges of applications.
[Features]
· Blister packed.
· Corresponds to the JIS standard.
· A small packaged item in one-piece units (contains 2 pieces for diameters less than 4.0 mm).
[Applications]
· It can be used in various situations.
A partire da∗ : | 4.70 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Punta lunga a gambo dritto LSD
NACHI(FUJIKOSHI)
A general-purpose long drill which is used for the widest range of applications.
[Features]
· It supports various drilling depths, so the optimal drill for the processing can be selected from an abundant choice of sizes (groove length, full length).
A partire da∗ : | 7.09 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
Coated drill for deep holes.
[Features]
· It discharges chips well, making it ideal for drilling deep holes and deep positions.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
· TiN coating adopted to achieve a longer life even for deep holes.
[Applications]
· It discharges cutting chips well even for deep holes, enabling high-efficiency machining.
A partire da∗ : | 20.19 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Punta Aqua Drill EX con foro per olio 3D AQDEXOH3D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.
A partire da∗ : | 93.32 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta AQDEXZOH3D Aqua Drill EX Flat, con foro per olio, 3D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 3D.
· A drill with oil hole that supports stainless steel.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
A partire da∗ : | 98.22 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta per svasatura di viti a testa piatta SCD
NACHI(FUJIKOSHI)
[Features]
· It is a countersinking stepped drill for flathead screws.
A partire da∗ : | 28.08 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta per svasatura di viti a testa piatta ed esagono incassato RCD
NACHI(FUJIKOSHI)
[Features]
· Stepped drill for sinking/countersinking hex socket bolts.
A partire da∗ : | 28.08 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Punta Aqua Drill EX con foro per olio 5D AQDEXOH5D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
· Capable of stable wet processing and MQL processing.
· For highly-efficient hole drilling up to 5 times the drill diameter.
[Applications]
· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.
A partire da∗ : | 91.24 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta per trapano elettrico lunga AG, tipo AGPLSD
NACHI(FUJIKOSHI)
A drill that can steplessly drill deep holes up to L/D20.
[Features]
· Adopts AG coating with excellent wear resistance to realize a longer life.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
[Applications]
· Ideal for deep hole machining for anything from raw materials to mold steel.
A partire da∗ : | 14.13 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
A general-purpose drill used in the widest ranges of applications.
[Features]
· A standard drill that corresponds to the JIS standard.
A partire da∗ : | 26.05 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta per usi generici su acciaio/ghisa/alluminio SDSET50, kit da 50
NACHI(FUJIKOSHI)
A general-purpose drill used in the widest ranges of applications.
A partire da∗ : | 157.62 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
Drill that can be easily used for electric drills and drilling machines.
[Features]
· A drill with a 3-jaw chuck and an easy-to-use shank.
· V-groove is provided on the shank to prevent slippage.
· The shank is unified into three types: φ6.5 (diameter 6.5 mm), φ9.5 (diameter 9.5 mm) and φ12.65 (diameter 12.65 mm).
· A drill bit with a diameter larger than the holding capacity of the drill chuck can be used.
[Applications]
· It is an easily used shank that matches the three-claw chuck of electric drills and drilling machines.
A partire da∗ : | 13.57 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta a centrare AG, tipo AGSTD
NACHI(FUJIKOSHI)
HSS drill which is capable of speedy centering, chamfering and V-grooving and boasts a long service life.
[Features]
· Highly accurate positioning is possible with good bite.
· The sharp blade produces a beautifully finished surface.
[Applications]
· Can be used for various processing, from chamfering to V groove machining.
A partire da∗ : | 13.73 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
[Applications]
· Convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.
A partire da∗ : | 7.67 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta a gambo conico corta G, tipo GTS
NACHI(FUJIKOSHI)
Taper type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.
A partire da∗ : | 65.88 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta per acciaio inox UG, tipo UGSUS
NACHI(FUJIKOSHI)
This drill is ideal for stainless steel processing. UG coating with excellent heat resistance provides a long service life.
A partire da∗ : | 12.05 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta Aqua Drill 3 taglienti AQD3F
NACHI(FUJIKOSHI)
3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.
A partire da∗ : | 24.62 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta con foro per nebulizzazione olio Aqua Drill (per 3D) AQMH3D
NACHI(FUJIKOSHI)
Drill with semi-dry compatible mist hole. Capable of highly-efficient hole drilling up to 3 times the drill diameter.
A partire da∗ : | 87.34 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta con foro per nebulizzazione olio Aqua Drill (per 7D) AQMH7D
NACHI(FUJIKOSHI)
Drill with semi-dry compatible mist hole. Capable of highly-efficient hole drilling up to 7 times the drill diameter.
A partire da∗ : | 112.96 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta standard Aqua Drill Regular AQDR
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
A partire da∗ : | 29.51 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta Aqua Drill 3 tagli AQDED3F
NACHI(FUJIKOSHI)
Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.
[Features]
· Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.
· 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.
· Finish processing is possible with work efficiency of 10 times or more compared to a reamer.
[Applications]
· 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.
A partire da∗ : | 64.70 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta a gambo dritto in cobalto G, tipo COSD
NACHI(FUJIKOSHI)
A general-purpose cobalt drill that can handle anything from steel to stainless steel.
[Features]
· Consistent drill bite due to the X-type thinning.
· Sharpness is increased by reinforcing the drill torsion angle.
· White surface less than 2.0 mm in diameter (not colored).
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel.
A partire da∗ : | 3.70 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
A general-purpose HSS drill which is used for the widest range of applications.
[Features]
· Corresponds to the JIS standard.
[Applications]
· Usable in a wide range of applications.
A partire da∗ : | 2.37 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Punta a centrare AG, a gambo lungo, tipo AGSTDLS
NACHI(FUJIKOSHI)
Long shank type starting HSS drill for deep locations or avoiding interference.
[Features]
· Capable of speedy centering, chamfering and V-grooving and boasts a long service life.
· Highly accurate positioning is possible with good bite.
· The sharp blade produces a beautifully finished surface.
[Applications]
· Can be used with outstanding positioning accuracy for various processing, from chamfering to V groove machining.
A partire da∗ : | 22.49 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
[Applications]
· Also convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.
A partire da∗ : | 10.08 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
High-speed drill for high efficiency machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Has low adhesion and eliminates troubles such as chip clogging which are likely to occur in aluminum processing.
[Applications]
· The coefficient of friction is small, and since the aluminum is unlikely to weld, high friction efficiency with aluminum alloys is demonstrated.
A partire da∗ : | 5.54 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
Short type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.
A partire da∗ : | 6.49 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
Straight shank type coating drill for general purpose.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
[Applications]
· Supports materials from steel to stainless steel and aluminum.
A partire da∗ : | 4.31 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Punta a gambo conico standard G, tipo GTD
NACHI(FUJIKOSHI)
Taper shank type coating drill for general purpose.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
[Applications]
· Supports materials from steel to stainless steel and aluminum.
A partire da∗ : | 57.19 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
[Features]
· High-grade powdered high-speed steel and SG coating allows the HSS drill to have the longest life possible.
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
· Allows high-speed, high-efficiency machining up to mold steel and aluminum.
* Cannot be used for austenitic stainless steel.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.
A partire da∗ : | 10.45 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Punta SG-FAX, con foro per olio, tipo SGOH
NACHI(FUJIKOSHI)
Oil hole HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
A partire da∗ : | 154.92 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta standard Aqua Drill EX Regular AQDEXR
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.
A partire da∗ : | 72.74 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
[Features]
· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
· Longer life than conventional FC drills.
· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
[Applications]
· Ideal for long life machining of FC, FCD, and low carbon steel.
A partire da∗ : | 67.10 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta dura Aqua Drill Hard AQDH
NACHI(FUJIKOSHI)
Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
[Features]
· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
· Wear resistance and chipping resistance are greatly improved.
· Uses a thick core and weak torsion.
· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
[Applications]
· High performance machining of 50 to 70 HRC high hardness steel is possible.
A partire da∗ : | 22.95 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Punta con foro per nebulizzazione olio Aqua Drill (per 5D) AQMH5D
NACHI(FUJIKOSHI)
Drill with semi-dry compatible mist hole. Capable of highly-efficient hole drilling up to 5 times the drill diameter.
A partire da∗ : | 93.16 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Micropunta Aqua Micro Drill AQMD
NACHI(FUJIKOSHI)
A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.
A partire da∗ : | 25.47 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Punta a gambo conico cobalto COTD
NACHI(FUJIKOSHI)
A general-purpose cobalt drill that can handle anything from steel to stainless steel and aluminum.
[Features]
· Cobalt HSS with excellent wear resistance and heat resistance is used for the main body.
A partire da∗ : | 39.98 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
NACHI(FUJIKOSHI)
General purpose coated oil hole drill.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating and internal lubrication provide a cooling effect that results in a long D lifetime.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum.
A partire da∗ : | 173.01 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta per trapano elettrico UG, tipo UGPD
NACHI(FUJIKOSHI)
Capable of high-efficiency deep drilling of steel and cast iron. Non-step processing up to 7 times the drill diameter is possible.
A partire da∗ : | 6.71 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta corta Aqua Drill EX Stub AQDEXS
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
[Applications]
· The unique thinning shape increases biting and reduces cutting resistance.
· Stable cutting performance even with thin work materials and small low-rigidity processing machines.
A partire da∗ : | 61.47 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta a gambo conico lunga LTD
NACHI(FUJIKOSHI)
A general-purpose long drill which is used for the widest range of applications.
[Features]
· It supports various drilling depths, so the optimal drill for the processing can be selected from an abundant choice of sizes (groove length, full length).
[Applications]
· Select a drill bit suitable for the depth to be drilled prior to commencing drilling work.
A partire da∗ : | 81.91 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Punta AG-SUS, corta, tipo AGSUSS
NACHI(FUJIKOSHI)
Drill capable of stable hole drilling with AG coating excellent in heat resistance.
[Features]
· Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
· It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
· Stable machining accuracy is achieved by using a high-precision end mill shank.
[Applications]
· Optimal for stainless steel.
A partire da∗ : | 5.45 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Punta standard AG-SUS, tipo AGSUSR
NACHI(FUJIKOSHI)
Drill capable of stable hole drilling with AG coating excellent in heat resistance.
[Features]
· Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
· It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
· Stable machining accuracy is achieved by using a high-precision end mill shank.
[Applications]
· Optimal for stainless steel.
A partire da∗ : | 6.25 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Marchio |
---|
Serie prodotto |
A partire da∗ |
Consegna da : |
Specifiche |
Hole diameter (drill diameter) D(mm) |
Groove Length L(mm) |
work material |
Tool Material Type |
Overall Length L(mm) |
Shank Type |
Coating Y/N |
Coating Type |
With/without Oil Hole |
| |||||||||||||||||||||||||||||||||||||||||||||
Marchio | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
Serie prodotto | Punta per svasatura di viti a testa piatta ed esagono incassato RCD | Punta per usi generici su acciaio/ghisa/alluminio SDSET50, kit da 50 | Punta con foro per nebulizzazione olio Aqua Drill (per 3D) AQMH3D | Punta con foro per nebulizzazione olio Aqua Drill (per 7D) AQMH7D | Punta con foro per nebulizzazione olio Aqua Drill (per 5D) AQMH5D | ||||||||||||||||||||||||||||||||||||||||
A partire da∗ | 56.55 € *Prezzo unitario in configurazione base | 7.96 € *Prezzo unitario in configurazione base Sconto volumi elevati | 4.70 € *Prezzo unitario in configurazione base | 7.09 € *Prezzo unitario in configurazione base Sconto volumi elevati | 20.19 € *Prezzo unitario in configurazione base Sconto volumi elevati | 93.32 € *Prezzo unitario in configurazione base | 98.22 € *Prezzo unitario in configurazione base | 28.08 € *Prezzo unitario in configurazione base Sconto volumi elevati | 28.08 € *Prezzo unitario in configurazione base Sconto volumi elevati | 91.24 € *Prezzo unitario in configurazione base | 14.13 € *Prezzo unitario in configurazione base Sconto volumi elevati | 26.05 € *Prezzo unitario in configurazione base Sconto volumi elevati | 157.62 € *Prezzo unitario in configurazione base | 13.57 € *Prezzo unitario in configurazione base Sconto volumi elevati | 13.73 € *Prezzo unitario in configurazione base Sconto volumi elevati | 7.67 € *Prezzo unitario in configurazione base Sconto volumi elevati | 65.88 € *Prezzo unitario in configurazione base Sconto volumi elevati | 12.05 € *Prezzo unitario in configurazione base Sconto volumi elevati | 24.62 € *Prezzo unitario in configurazione base | 87.34 € *Prezzo unitario in configurazione base | 112.96 € *Prezzo unitario in configurazione base | 29.51 € *Prezzo unitario in configurazione base | 64.70 € *Prezzo unitario in configurazione base | 3.70 € *Prezzo unitario in configurazione base Sconto volumi elevati | 2.37 € *Prezzo unitario in configurazione base Sconto volumi elevati | 22.49 € *Prezzo unitario in configurazione base | 10.08 € *Prezzo unitario in configurazione base Sconto volumi elevati | 5.54 € *Prezzo unitario in configurazione base | 6.49 € *Prezzo unitario in configurazione base Sconto volumi elevati | 4.31 € *Prezzo unitario in configurazione base Sconto volumi elevati | 57.19 € *Prezzo unitario in configurazione base | 10.45 € *Prezzo unitario in configurazione base Sconto volumi elevati | 154.92 € *Prezzo unitario in configurazione base Sconto volumi elevati | 72.74 € *Prezzo unitario in configurazione base Sconto volumi elevati | 67.10 € *Prezzo unitario in configurazione base Sconto volumi elevati | 22.95 € *Prezzo unitario in configurazione base Sconto volumi elevati | 93.16 € *Prezzo unitario in configurazione base | 25.47 € *Prezzo unitario in configurazione base Sconto volumi elevati | 39.98 € *Prezzo unitario in configurazione base | 173.01 € *Prezzo unitario in configurazione base Sconto volumi elevati | 6.71 € *Prezzo unitario in configurazione base Sconto volumi elevati | 61.47 € *Prezzo unitario in configurazione base Sconto volumi elevati | 81.91 € *Prezzo unitario in configurazione base | 5.45 € *Prezzo unitario in configurazione base Sconto volumi elevati | 6.25 € *Prezzo unitario in configurazione base Sconto volumi elevati |
Consegna da : | 5 giorni | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | 5 giorni | 5 giorni | 5 giorni | Stesso giorno | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | Stesso giorno | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | Stesso giorno | 5 giorni | 5 giorni | Stesso giorno | Stesso giorno | Stesso giorno | 5 giorni | Stesso giorno | 5 giorni | 5 giorni | 5 giorni | Stesso giorno | 5 giorni | Stesso giorno | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | Stesso giorno | 5 giorni |
Specifiche |
| ||||||||||||||||||||||||||||||||||||||||||||
Hole diameter (drill diameter) D(mm) | 0.5 ~ 20 | 0.57 ~ 20 | 0.2 ~ 13 | 1 ~ 13 | 1 ~ 20 | 3 ~ 16 | 3 ~ 16 | - | - | 1 ~ 16 | 1 ~ 13 | 7 ~ 100 | 1.1 ~ 6 | 7 ~ 32 | 3 ~ 20 | 1 ~ 20 | 7 ~ 32 | 3.1 ~ 13 | 3 ~ 16 | 4.1 ~ 16 | 4.1 ~ 16 | 2.1 ~ 10 | 3 ~ 12 | 0.5 ~ 13 | 0.2 ~ 17.5 | 3 ~ 12 | 2 ~ 20 | 1 ~ 13 | 1 ~ 20 | 0.5 ~ 13 | 7 ~ 32 | 2 ~ 32 | 10 ~ 30 | 2 ~ 16 | 2 ~ 12 | 2 ~ 12 | 4.1 ~ 16 | 0.2 ~ 1.99 | 7 ~ 40 | 8 ~ 40 | 1.1 ~ 12.9 | 2 ~ 16 | 7 ~ 50 | 1 ~ 20 | 1 ~ 20 |
Groove Length L(mm) | 1.65 ~ 90 | 3 ~ 94 | 3 ~ 114 | 35 ~ 300 | 40 ~ 450 | 17 ~ 80 | 2 ~ 72 | 25 ~ 45 | 25 ~ 95 | 8 ~ 128 | 33 ~ 235 | 75 ~ 355 | - | 35 ~ 74 | 9 ~ 40 | 6 ~ 94 | 45 ~ 114 | 36 ~ 101 | 16 ~ 80 | 25 ~ 88 | 43 ~ 152 | 15 ~ 60 | 16 ~ 51 | 5 ~ 80 | 3 ~ 143 | 9 ~ 30 | 24 ~ 140 | 12 ~ 101 | 8 ~ 94 | 6 ~ 101 | 67 ~ 177 | 24 ~ 185 | 75 ~ 174 | 15 ~ 96 | 15 ~ 73 | 12 ~ 51 | 34 ~ 120 | 2.5 ~ 15 | 75 ~ 220 | 33 ~ 152 | 14 ~ 101 | 8 ~ 55 | 25 ~ 700 | 6 ~ 94 | 12 ~ 140 |
work material | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[○] / Acciaio inox[○] / Ghisa[◎] / Alluminio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio inox[◎] / Ghisa[◎] / Alluminio[○] / Titanio[◎] / Rame[○] | Acciaio generico[○] / Ghisa[○] / Alluminio[○] | Acciaio generico[○] / Ghisa[○] / Alluminio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[◎] / Ghisa[◎] / Titanio[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[○] / Acciaio ad alta durezza[○] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[○] / Ghisa[○] / Alluminio[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[○] / Ghisa[○] / Alluminio[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[◎] / Titanio[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[◎] / Ghisa[◎] | Acciaio generico[○] / Ghisa[○] / Alluminio[○] / Rame[○] | Acciaio generico[○] / Ghisa[○] / Alluminio[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[○] / Ghisa[○] / Alluminio[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Titanio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Titanio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Titanio[○] / Rame[○] | Acciaio generico[○] / Acciaio inox[◎] / Alluminio[○] / Rame[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Ghisa[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[○] / Ghisa[◎] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[○] / Ghisa[◎] | Acciaio generico[○] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[○] / Ghisa[○] | Acciaio generico[◎] / Ghisa[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[○] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Rame[○] | Acciaio generico[○] / Ghisa[○] / Alluminio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Titanio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Titanio[○] / Rame[○] | Alluminio[◎] / Rame[◎] | Acciaio generico[◎] / Acciaio raffreddato e temperato[○] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Titanio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[○] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[○] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Titanio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Ghisa[○] / Alluminio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Titanio[◎] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[○] / Ghisa[○] | Acciaio generico[◎] / Ghisa[◎] | Acciaio ad alta durezza[◎] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[○] / Ghisa[◎] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[◎] / Ghisa[○] / Titanio[○] | Acciaio generico[○] / Acciaio raffreddato e temperato[○] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Rame[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio inox[○] / Ghisa[○] / Alluminio[○] / Titanio[○] / Rame[○] | Acciaio raffreddato e temperato[◎] / Acciaio inox[○] / Ghisa[◎] / Titanio[○] | Acciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio ad alta durezza[◎] / Acciaio inox[○] / Ghisa[○] | Acciaio generico[○] / Ghisa[○] / Alluminio[○] / Rame[○] | Acciaio generico[◎] / Acciaio inox[◎] / Alluminio[○] / Titanio[○] / Rame[○] | Acciaio generico[◎] / Acciaio inox[◎] |
Tool Material Type | Carburo | Acciaio rapido | Acciaio rapido | Acciaio rapido | Cobalto HSS | Carburo | Carburo | Acciaio rapido | Acciaio rapido | Carburo | Cobalto HSS | Acciaio rapido | Acciaio rapido | Acciaio rapido | Cobalto HSS | Acciaio rapido | Cobalto HSS | Cobalto HSS | Carburo | Carburo | Carburo | Carburo | Carburo | Cobalto HSS | Acciaio rapido | Cobalto HSS | Acciaio rapido | Acciaio rapido | Cobalto HSS | Acciaio rapido | Acciaio rapido | Acciaio rapido | Acciaio rapido | Carburo | Carburo | Carburo | Carburo | Carburo | Cobalto HSS | Cobalto HSS | Cobalto HSS | Carburo | Acciaio rapido | Acciaio rapido | Acciaio rapido |
Overall Length L(mm) | 47 ~ 145 | 38 ~ 168 | - | 75 ~ 600 | 75 ~ 600 | 68 ~ 146 | 68 ~ 146 | 65 ~ 90 | 65 ~ 145 | 56 ~ 194 | - | - | - | 75 ~ 134 | - | 40 ~ 168 | 126 ~ 235 | 65 ~ 151 | 48 ~ 144 | 78 ~ 146 | 97 ~ 220 | 47 ~ 110 | 48 ~ 108 | 27 ~ 152 | 19 ~ 194 | - | 56 ~ 210 | 50 ~ 158 | 33 ~ 168 | 22 ~ 151 | 148 ~ 298 | 56 ~ 255 | 144 ~ 265 | 49 ~ 160 | 47 ~ 130 | 44 ~ 108 | 88 ~ 180 | 38 ~ 47 | 155 ~ 365 | 83 ~ 250 | 36 ~ 151 | 45 ~ 112 | 200 ~ 1000 | 40 ~ 168 | 50 ~ 210 |
Shank Type | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | - | A gambo dritto | A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | A gambo dritto | A gambo dritto | Punta a gambo dritto / A gambo dritto | - | - | - | Punta a gambo dritto | - | Punta a gambo dritto / A gambo dritto | - | A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | A gambo dritto | A gambo dritto | - | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | A gambo dritto | A gambo dritto | - | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto | Punta gambo conico | Punta a gambo dritto / A gambo dritto | A gambo dritto | Punta a gambo dritto / A gambo dritto | Punta gambo conico | Punta a gambo dritto / A gambo dritto | Punta a gambo dritto / A gambo dritto |
Coating Y/N | Disponibile | Disponibile | - | N/A | Disponibile | Disponibile | Disponibile | N/A | N/A | Disponibile | Disponibile | - | - | N/A | - | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | N/A | N/A | - | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | Disponibile | N/A | Disponibile | Disponibile | Disponibile | N/A | Disponibile | Disponibile |
Coating Type | Altro | TiCN | - | Senza rivestimento | TiN | Altro | Altro | Senza rivestimento | Senza rivestimento | Altro | Altro | - | - | Senza rivestimento | - | Altro | TiN | TiCN | Altro | Altro | Altro | Altro | Altro | Senza rivestimento | Senza rivestimento | - | Altro | DLC | TiN | TiN | TiN | TiCN | TiCN | Altro | Altro | Altro | Altro | Altro | - | TiN | TiCN | Altro | - | TiAlN | Altro |
With/without Oil Hole | N/A | N/A | - | N/A | N/A | Disponibile | Disponibile | N/A | N/A | Disponibile | - | - | - | N/A | - | N/A | - | N/A | N/A | Disponibile | Disponibile | N/A | N/A | N/A | N/A | - | N/A | N/A | N/A | N/A | - | N/A | Disponibile | N/A | N/A | N/A | Disponibile | N/A | - | Disponibile | N/A | - | - | N/A | N/A |
Loading...
Vi chiediamo gentilmente di aiutarci a migliorare il nostro sito
É gradito un commento sull'e-Catalog MISUMI
Grazie della collaborazione.
Vi preghiamo di utilizzare l'apposito modulo di richiesta.