NABEYA BI-TECH Pulegge per cinghie trapezoidali

?* Informazioni su tempi di consegna e prezzi

• 

  Puleggia Isomec SP

  NABEYA BI-TECH

  V pulley to international standards. Either general purpose V-belt, or narrow width V-belt can be used.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Can be attached and removed from shaft / positioned with hex or socket wrench. In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission is achieved.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	46.05 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Calibro per gole VMG per pulegge per cinghie trapezoidali

  NABEYA BI-TECH

  Gauge for checking wear of pulley V-groove part. Orders can be made for individual shapes, or as a set for each groove shape. A gap has been provided between the gauge and the outer circumference of the pulley and the bottom of the V-groove. Early replacement is recommended for transmission efficiency.

  A partire da∗ ：	90.21 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Puleggia Poly Drive Isomec

  NABEYA BI-TECH

  Excellent transmission efficiency. High-speed / high-power transmission. Lightweight and compact transmission system.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	83.41 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Puleggia cuneo

  NABEYA BI-TECH

  Allows high speed / high power transmission. Large rotation ratio obtainable, that can substitute speed reduction gear.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	18.18 €
  Consegna da ：	8 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Puleggia standard V

  NABEYA BI-TECH

  Imbalance mass allowance on the outer circumference is 0.2% or 3 g if larger, of the pulley mass.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	11.95 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Puleggia con velocità variabile

  NABEYA BI-TECH

  Fine rotation ratio adjustment. Simple structure, precision machining. No rattling due to micro vibrations / shock loads.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	74.34 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Puleggia Vankin VK

  NABEYA BI-TECH

  [Features]
  · Owing to the rotation molding method, the pulley is given a rigidity which can be applied to light / moderate load transmission in general industrial machinery.
  · The pulley grooves are rounded, and with is no sharp corners will not damage the belt.
  · Because of its light weight, the entire machine including the base / pillow block etc can be made lighter and more compact.
  · Material finish: disk: SPCC, electrodeposition coating (NBK dark blue), hub: FC200, electrodeposition coating (NBK dark blue), bolt: 10B22M.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	14.61 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Puleggia JIS V

  NABEYA BI-TECH

  Highest quality pulley, with materials together with machining and balance accuracy exceeding JIS standards.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway, and set screw machining standardized.
  · Easy set-up
  · A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JISB1854-1987 "General use V-pulley")
  · Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.
  · Surface treatment, for improving corrosion resistance is a electrodeposition coating with beautiful finish.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	16.08 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Boccole Isomec

  NABEYA BI-TECH

  Safe and reliable fastening system. Responding to a design change is easy.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	24.21 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Trasmissione a variazione continua (Modello Hagino) W / L

  NABEYA BI-TECH

  [Features]
  · Rotation has continuously variable speed.
  · In the hagino type CVT, by placing a speed change pulley on the intermediate shaft and changing the position thereof, the rotational speed of the pulley on the driven side is changed utilizing the tension balance of the belt, allowing continuously variable transmission.
  · Alignment is automatically adjusted.
  · Both side disks and middle disks move freely on the shaft.
  · Alignment with the driving side pulley and the driven side pulley is automatically adjusted.
  · For this reason, the center of the belt is always held, and the belt is not strained.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	219.70 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Boccola Isomec / Adattatore

  NABEYA BI-TECH

  ISOMEC bushing can be used simply by machining a straight hole into the rotating body.

  A partire da∗ ：	55.01 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

• 

  Boccola Isomec / Mozzo con bullone

  NABEYA BI-TECH

  ISOMEC bushing can be used simply by connecting a bolt to the rotating body.

  A partire da∗ ：	75.21 €
  Consegna da ：	9 giorni

  *Prezzo unitario in configurazione base

Loading...