OSG Frese al carburo a testa quadrata（work material：Ghisa）

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

Non-coated, 2-flute, and extra-long.

End mill for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

General purpose type 2-flute end mill with FX coating for excellent heat resistance. Can be used for a wide range of machining.

Sharp-edged.

A general-purpose 2-flute end mill which uses a high-toughness carbide alloy as its base material for excellent stability. Can be used for a wide range of work materials and enables highly reliable processing.

Blade length is 1.5 times the blade diameter, an ultra-short blade that is ideal for high speed machining with high speed machining centers.

Heavy duty type 2-flute end mill with reinforced bottom blade corner. Capable of heavy cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.

Sharp-edged.

Uses high toughness carbide alloy with high Young's modulus.

General purpose type 2-flute long blade end mill with FX coating for excellent heat resistance.

Sharp-edged.

End mill that enables continuous grooving after plunging without preprocessing. Number of tools in the magazine can be reduced.

Non-coated, 4-flute, and extra-long.

General purpose type 4-flute end mill with FX coating for excellent heat resistance. Can be used for both high-speed and high-feed processing.

Sharp-edged.

General-purpose 4-flute end mill in which high toughness carbide is used as the base material. Can be used for a wide range of work materials and enables highly reliable processing.

The hard lubricant film WXL coating enables cutting a wide range of materials such as general steel, hardened steel, and copper alloys. Recommended for both wet and dry work.

Ultra-heat-resistant, ultra-hard newly developed WX super coated high rigidity ball end mill. High-speed, high-precision machining of hardened steel as well as, of course, high-speed general steel machining.

Blade length is 1.5 times the blade diameter, an ultra-short blade that is ideal for high speed machining with high speed machining centers.

Heavy duty type 4-flute end mill with reinforced bottom blade corner. Capable of high-speed and high-feed cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.

Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

General purpose type 4-flute long blade end mill with FX coating for excellent heat resistance.

Sharp-edged.

A multi-functional end mill which minimizes chatter to allow highly efficient machining of grooves and side walls.

Next generation high torsion end mill with short blade length, great chip discharge performance, and high blade rigidity. Capable of high-feed processing at large cutting depth thanks to its rigid short blade length.

Next generation high torsion end mill with medium blade length, great chip discharge performance, and high blade rigidity. Applicable to a wide range of work materials.

Next generation high torsion end mill with long blade length, great chip discharge performance, and high blade rigidity.

CBN tip brazed type end mill. Exhibits true performance when machining hardened steel.

Even with the 4-flute grooving, it provides excellent chip discharge and prevents burring with excellent sharpness. A 3-flute version resilient to chatter is also available.

50° torsion.

Since it has a long shank, it enables high-efficiency machining even when working on wall grooves, with no concern required for interference.

High-speed machining end mill with extremely high tool rigidity. High speed machining of hardened steel is also possible.

Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.

Long shank end mill with extremely high tool rigidity. Machining is possible with a wide range of materials, from general materials to hardened steel.

Long blade end mill with superb tool rigidity. Machining is possible with a wide range of materials, from general materials to hardened steel.

End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.

WXL coating has excellent lubrication and resistance to wear. Effective for a wide range of work materials and cutting areas, and available in abundant variations.

Ideal for rib groove machining or machining detailed components when there is a problem with interference, etc. Select the effective length according to the processing.

End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.

WXL coating has excellent lubrication and resistance to wear. Effective for a wide range of work materials and cutting areas, and available in abundant variations.

A long-neck 4-flute end mill that supports processing in narrow and deep spaces. Bottom blade is of a specification that increases the strength of the corner portions.