OSG Frese a testa sferica al carburo（Machining Application：Incisione）

End mill with diamond coating dedicated for graphite.

Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.

A small diameter ball end mill series with a CrN coating for excellent lubricity. Ideal for fine processing of copper electrodes and IT parts.

Grazie al rivestimento FX e al metallo duro ad alta resistenza, è possibile un'ampia gamma di lavorazioni. Rivestito per acciaio Categoria standard/alternativa: prodotto standard del produttore Numero di taglienti (pezzi) 2 Diametro del gambo (mm) 3, Lunghezza totale (mm) 40, Angolo di spirale: spirale standard (da 30 a 44°) Precisione (µm) ±10.

Diametro gambo (mm) 3, lunghezza totale (mm) 40, angolo elica: elica standard (da 30 a 44°)

Estremità a sfera a 2 eliche tipo CBN-EBD Dimostra elevate prestazioni nella lavorazione di materiali ad alta resistenza e ghisa L'ampia selezione di utensili CBN consente di scegliere l'utensile migliore per la propria applicazione.

Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide

Allows both high-speed machining and dry cutting of aluminum. Also, great extension of tool life even in graphite processing has been achieved.

Mostra un'eccellente durata nella lavorazione di grafite, alluminio, ecc. Materiale di lavorazione: alluminio/rame/grafite Per il rivestimento di metalli non ferrosi (rivestimento diamantato) Categoria standard/alternativa: prodotto standard del produttore Numero di lame (pezzi) 2 Diametro del gambo (mm) 6

Ultra-smooth DLC coating prevents welding adhesion. Achieves high speed in shape machining of aluminum alloys, while also obtaining a smooth surface finish.

Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.

High toughness carbide alloy is used, providing a long service life at medium to low speeds

A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.

Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.

Lavorazione ad alta velocità e precisione grazie alla combinazione di calettamento e HSK Materiale: alluminio/rame/resina Per il rivestimento di metalli non ferrosi (CrN) Categoria standard/alternativa: prodotto standard del produttore Numero di scanalature (pz.) 2 Angolo di elica: elica standard (da 30 a 44°), precisione R (µm) ±10.

WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas

High-precision ball end mill for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers. Super ultra-fine particle carbide base metal realizes long life for hardened steel high-speed machining.

The long shank allows machining in deep sections

Ball end mill for heavy cutting that enables high speed and high efficiency (large cutting depth). Short overall length which fits shrink-fit and HSK types perfectly.

Ultra-high grade accuracy and precision ball end mill series for better craftsmanship. Short length that perfectly fits the HSK shrink holder. The product accuracy warranty sheet is included for HP3 specification types.

Ball end mill for copper, aluminum alloy, and plastic. Highly sharp with good chip discharge.

Ball end mill that enables dry cutting of copper and copper alloy thanks to the CrN coating and sharp blade shape.

The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.

Ball end mill for high-hardness steel with an oil hole that has achieved superb tool rigidity.

Pencil neck ball supports ultra-deep milling of graphite electrodes. Ultra-microcrystalline diamond coating realizes dramatic extension of tool life.

Pencil neck with high rigidity provides excellent cutting even with large protrusion length.

WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas

Ball end mill for deep-engraving in places that cannot be reached with ordinary end mills.

Realizes high efficiency machining that will change the way you think about deep engraving. The unique spiral ball blade prevents vibration during deep-engraving and achieves stable high-feed cutting.

Ball end mill with a new design that's given a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

End mill with diamond coating dedicated for graphite.

Adopts carbide alloy as the base material for extremely excellent wear resistance, achieving a long working life for graphite machining.

Adopts carbide alloy as the base material for extremely excellent wear resistance, achieving a long working life for graphite machining.

Diamond coated end mill for graphite machining. Guarantees marvelously extended tool life.

Adopts carbide alloy as the base material for extremely excellent wear resistance, achieving a long working life for graphite machining.

The spherical cutting edge prevents chattering even when processing vertical walls. Also allows undercut machining.

Ball end mill with spherical cutting edge developed for shrink fitting.

Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.

Also ideal for copper electrode machining that requires large protrusions as it has a short blade and long neck shape with high rigidity.

End mill with diamond coating dedicated for graphite.

Estremità a sfera a 2 eliche a collo lungo tipo CBN-LN-SXB -Raggiunge fresature profonde anche in piccoli diametri. Buona qualità di taglio. Con l'effetto del taglio a spirale, si ottengono sia la resistenza che l'affilatura del tagliente. Per il materiale delle eliche viene utilizzato il corpo sinterizzato CBN.

In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

Ultra-smooth DLC coating prevents welding adhesion. Achieves high speed in shape machining of aluminum alloys, while also obtaining a smooth surface finish.

WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas

Ball end mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.