Registrati
Configura

Cancella tutto

  • Single corner (θ) (Degree)
  • Tip diameter (D) (φ)
  • Type
  • work material
  • Blade length (l) (mm)
  • Number of flutes (sheet)
  • Produttore

OSG Frese a testa conica al carburo(Type:Tipo quadrato conico)

  • A 2 tagli, tagliente conico, tipo corto, FX-MG-TPDS
    • Sconto volumi elevati

    OSG

    A 2 tagli, tagliente conico, tipo corto, FX-MG-TPDS

    FX coating enables high efficiency and long service life. Can be used with a wide range of materials, from general materials to hardened steel.
    Leggi altro
    Single corner (θ) (Degree)Tip diameter (D) (φ)Typework materialBlade length (l) (mm)R Size (mm)Number of flutes (sheet)Shank diameter (d) (mm)Overall Length (L) (mm)
    0.5 ~ 200.5 ~ 12Tipo quadrato conicoAcciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio a elevata durezza: a HRC55[○] / Acciaio a elevata durezza: a HRC60[○] / Acciaio inox[○] / Ghisa[◎] / Alluminio[○] / Titanio[○] / Rame[○]2 ~ 40-23 ~ 2040 ~ 120
    Prezzo (IVA esclusa) da:
    76.47 €
    Prezzo inclusa IVA:
    91.00 €
    Spedizione prevista in:
    6 giorni lavorativi
    Configura ora
  • A 2 tagli, tagliente conico, tipo corto, MG-TPDS

      OSG

      A 2 tagli, tagliente conico, tipo corto, MG-TPDS

      High toughness carbide alloy is used, providing a long service life at medium to low speeds
      Leggi altro
      Single corner (θ) (Degree)Tip diameter (D) (φ)Typework materialBlade length (l) (mm)R Size (mm)Number of flutes (sheet)Shank diameter (d) (mm)Overall Length (L) (mm)
      0.5 ~ 71 ~ 12Tipo quadrato conicoAcciaio generico[○] / Acciaio raffreddato e temperato[○] / Ghisa[○] / Alluminio[○] / Rame[○]5 ~ 40-24 ~ 2045 ~ 110
      Prezzo (IVA esclusa) da:
      73.67 €
      Prezzo inclusa IVA:
      87.67 €
      Spedizione prevista in:
      6 giorni lavorativi
      Configura ora
    • A 4 tagli, tagliente conico, tipo corto, MG-TPMS

        OSG

        A 4 tagli, tagliente conico, tipo corto, MG-TPMS

        High toughness carbide alloy is used, providing a long service life at medium to low speeds
        Leggi altro
        Single corner (θ) (Degree)Tip diameter (D) (φ)Typework materialBlade length (l) (mm)R Size (mm)Number of flutes (sheet)Shank diameter (d) (mm)Overall Length (L) (mm)
        0.5 ~ 32 ~ 12Tipo quadrato conicoAcciaio generico[○] / Acciaio raffreddato e temperato[○] / Ghisa[○] / Alluminio[○] / Rame[○]8 ~ 30-44 ~ 1245 ~ 90
        Prezzo (IVA esclusa) da:
        81.57 €
        Prezzo inclusa IVA:
        97.07 €
        Spedizione prevista in:
        6 giorni lavorativi
        Configura ora
      • Testa conica per scanalature / nervature, FXS-RB-TPE
        • Sconto volumi elevati

        OSG

        Testa conica per scanalature / nervature, FXS-RB-TPE

        A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for processing side surfaces.
        Leggi altro
        Single corner (θ) (Degree)Tip diameter (D) (φ)Typework materialBlade length (l) (mm)R Size (mm)Number of flutes (sheet)Shank diameter (d) (mm)Overall Length (L) (mm)
        0.5 ~ 30.4 ~ 3Tipo quadrato conicoAcciaio generico[◎] / Acciaio raffreddato e temperato[◎] / Acciaio a elevata durezza: a HRC55[○] / Acciaio a elevata durezza: a HRC60[○] / Acciaio inox[○] / Ghisa[◎] / Titanio[○] / Rame[○]2 ~ 40-multi-edged3 ~ 835 ~ 80
        Prezzo (IVA esclusa) da:
        91.40 €
        Prezzo inclusa IVA:
        108.77 €
        Spedizione prevista in:
        6 giorni lavorativi
        Configura ora
      • Fresa al carburo (per scanalatura trapezoidale), MG-TRC
        • Sconto volumi elevati

        OSG

        Fresa al carburo (per scanalatura trapezoidale), MG-TRC

        Tapered blade end mill that can be used for trapezoidal runner processing. High toughness carbide alloy is used.
        Leggi altro
        Single corner (θ) (Degree)Tip diameter (D) (φ)Typework materialBlade length (l) (mm)R Size (mm)Number of flutes (sheet)Shank diameter (d) (mm)Overall Length (L) (mm)
        7 ~ 152 ~ 6Tipo quadrato conicoAcciaio generico[○] / Acciaio raffreddato e temperato[○] / Ghisa[○] / Alluminio[○] / Rame[○]4 ~ 12-24 ~ 1245 ~ 75
        Prezzo (IVA esclusa) da:
        84.50 €
        Prezzo inclusa IVA:
        100.56 €
        Spedizione prevista in:
        6 giorni lavorativi
        Configura ora