• A causa di motivi tecnici, il pagamento con carta di credito non è temporaneamente possibile. Ci scusiamo per l'inconveniente.

OSG Utensili per fori filettati(Tap Type:Thread cutter)

Eseguire la ricerca specificando la categoria di classe più bassa

Numero di dati da visualizzare
30
45
60
Ordina per:
Giorni spedizione
  • Tutti gli articoli
  • Stesso giorno
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • 7 giorni o meno
  • 8 giorni o meno
  • 9 giorni o meno
  • 10 giorni o meno
  • 18 giorni o meno
  1. 1
Marchio
Serie prodotto
A partire da
Consegna da :
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

    Serie di frese per filettatura Planet Cutter, diametro piccolo WH-VM-PNC

      Serie di frese per filettatura Planet Cutter MC - Planet Cutter PNGT

        Serie di frese per filettatura Planet Cutter NC - Planet Cutter WX-PNC

          Serie di frese per filettatura Planet Cutter - Super Planet DR-PNAC

            Serie di frese per filettatura Planet Cutter, in carburo a spirale OT-SFT-PNGT

              Serie di frese per filettatura Planet Cutter, in carburo OT-PNGT

                Serie di frese per filettatura Planet Cutter, Super Planet con foro per olio DR-O-PNAC

                  Serie di frese per filettatura Planet Cutter, acciaio con foro per olio WXO-ST-PNC

                  Marchio

                  OSG

                  OSG

                  OSG

                  OSG

                  OSG

                  OSG

                  OSG

                  OSG

                  Serie prodotto

                  Serie di frese per filettatura Planet Cutter, diametro piccolo WH-VM-PNC

                  Serie di frese per filettatura Planet Cutter MC - Planet Cutter PNGT

                  Serie di frese per filettatura Planet Cutter NC - Planet Cutter WX-PNC

                  Serie di frese per filettatura Planet Cutter - Super Planet DR-PNAC

                  Serie di frese per filettatura Planet Cutter, in carburo a spirale OT-SFT-PNGT

                  Serie di frese per filettatura Planet Cutter, in carburo OT-PNGT

                  Serie di frese per filettatura Planet Cutter, Super Planet con foro per olio DR-O-PNAC

                  Serie di frese per filettatura Planet Cutter, acciaio con foro per olio WXO-ST-PNC

                  A partire da

                  92.50 €

                  *Prezzo unitario in configurazione base

                  Sconto volumi elevati

                  205.83 €

                  *Prezzo unitario in configurazione base

                  144.20 €

                  *Prezzo unitario in configurazione base

                  295.75 €

                  *Prezzo unitario in configurazione base

                  233.46 €

                  *Prezzo unitario in configurazione base

                  308.75 €

                  *Prezzo unitario in configurazione base

                  324.46 €

                  *Prezzo unitario in configurazione base

                  151.10 €

                  *Prezzo unitario in configurazione base

                  Consegna da : 4 giorni 4 giorni 4 giorni 4 giorni 4 giorni 4 giorni 4 giorni 4 giorni
                  Screw TypesMeter / unifiedMeter / Taper for Pipe / Parallel for PipesMeter / unified / Taper for PipeMeterMeterMeter / Taper for Pipe / Parallel for PipesMeterMeter
                  Screw size (Nominal)---M6 ~ M12--M6 ~ M12-
                  Pitch (P), Number of Threading(mm)0.25 ~ 321 ~ 191 ~ 281 ~ 1.751 ~ 31 ~ 191 ~ 1.750.5 ~ 3
                  Chamfer threads (Lcf)--------
                  Tool Material TypeCarbideCobalt HSSCarbideCarbideCarbideCarbideCarbideCarbide
                  work materialLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
                  Tap TypeThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutter
                  Hole typeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind hole
                  Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable
                  Coating TypeFor High Hardness (Silicon Group) / OtherTiNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlN
                  Overall Length (L)(mm)4080 ~ 21060 ~ 12062 ~ 8960 ~ 14580 ~ 14562 ~ 8960 ~ 120

                  Loading...

                  1. 1

                  Categorie relative a Utensili per fori filettati