OSG Utensili per fori filettati（work material：Acciaio a basso contenuto di carbonio (contenuto di carbonio inferiore allo 0.25%)）

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

Excellent cutting edge strength is suitable for high hardness materials where the chippings don't stay connected.

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.

Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

Permette la filettatura interna dell'acciaio inox con un fluido da taglio solubile in acqua. Materiale utensile: Acciaio rapido al vanadio Tipo di foro: Per fori ciechi Materiale: Acciaio generico/acciaio inox.

Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes

Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.

Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.

Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.

If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.

If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.

Enables efficient chip discharge by discharging cutting fluid from the oil holes.

Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping

For standard point taps, it is used when the protruding length of the screw is insufficient.

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

TiN coating excellent in welding resistance and abrasion resistance is applied

TiN coating excellent in welding resistance and abrasion resistance is applied

TiN coating excellent in welding resistance and abrasion resistance is applied

TiN coating excellent in welding resistance and abrasion resistance is applied

It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

It is suitable for hard-to-cut materials, such as stainless steel and heat-resistant alloys, which have a hardened layer on the surface and cause welding easily.

[Caratteristiche] Un nuovo rubinetto con lunghezze complessive di 65 mm e 80 mm. [Caratteristiche] Può essere utilizzato per il montaggio laterale di viti per tubi e per la lavorazione di fori profondi.

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.

There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.

Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes

Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.