• A causa del tifone in Giappone / Tokyo, alcuni prodotti potrebbero riportare ritardi nella consegna. Ci scusiamo per l'inconveniente e ringraziamo per la comprensione.
  • A causa di motivi tecnici, il pagamento con carta di credito non è temporaneamente possibile. Ci scusiamo per l'inconveniente.

OSG Filiere

Numero di dati da visualizzare
30
45
60
Ordina per:
Giorni spedizione
  • Tutti gli articoli
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • 7 giorni o meno
  • 8 giorni o meno
  1. 1
Marchio
Serie prodotto
A partire da
Consegna da :
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)
  • Raccomandazione

Serie di frese per filettatura Planet Cutter, diametro piccolo WH-VM-PNC

    Serie di frese per filettatura Planet Cutter MC - Planet Cutter PNGT

      Serie di frese per filettatura Planet Cutter NC - Planet Cutter WX-PNC

        Serie di frese per filettatura Planet Cutter - Super Planet DR-PNAC

          Serie di frese per filettatura Planet Cutter, in carburo a spirale OT-SFT-PNGT

            Serie di frese per filettatura Planet Cutter, in carburo OT-PNGT

              Serie di frese per filettatura Planet Cutter, Super Planet con foro per olio DR-O-PNAC

                Serie di frese per filettatura Planet Cutter, acciaio con foro per olio WXO-ST-PNC

                Marchio

                OSG

                OSG

                OSG

                OSG

                OSG

                OSG

                OSG

                OSG

                Serie prodotto

                Serie di frese per filettatura Planet Cutter, diametro piccolo WH-VM-PNC

                Serie di frese per filettatura Planet Cutter MC - Planet Cutter PNGT

                Serie di frese per filettatura Planet Cutter NC - Planet Cutter WX-PNC

                Serie di frese per filettatura Planet Cutter - Super Planet DR-PNAC

                Serie di frese per filettatura Planet Cutter, in carburo a spirale OT-SFT-PNGT

                Serie di frese per filettatura Planet Cutter, in carburo OT-PNGT

                Serie di frese per filettatura Planet Cutter, Super Planet con foro per olio DR-O-PNAC

                Serie di frese per filettatura Planet Cutter, acciaio con foro per olio WXO-ST-PNC

                A partire da

                92.50 €

                *Prezzo unitario in configurazione base

                Sconto volumi elevati

                205.83 €

                *Prezzo unitario in configurazione base

                144.20 €

                *Prezzo unitario in configurazione base

                295.75 €

                *Prezzo unitario in configurazione base

                233.46 €

                *Prezzo unitario in configurazione base

                308.75 €

                *Prezzo unitario in configurazione base

                324.46 €

                *Prezzo unitario in configurazione base

                151.10 €

                *Prezzo unitario in configurazione base

                Consegna da : 4 giorni 4 giorni 4 giorni 4 giorni 4 giorni 4 giorni 4 giorni 4 giorni
                Screw TypesMeter / unifiedMeter / Taper for Pipe / Parallel for PipesMeter / unified / Taper for PipeMeterMeterMeter / Taper for Pipe / Parallel for PipesMeterMeter
                Screw size (Nominal)---M6 ~ M12--M6 ~ M12-
                Pitch (P), Number of Threading(mm)0.25 ~ 321 ~ 191 ~ 281 ~ 1.751 ~ 31 ~ 191 ~ 1.750.5 ~ 3
                Tool Material TypeCarbideCobalt HSSCarbideCarbideCarbideCarbideCarbideCarbide
                work materialLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
                Tap TypeThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutter
                Hole typeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind hole
                Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable
                Coating TypeFor High Hardness (Silicon Group) / OtherTiNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlN
                Overall Length (L)(mm)4080 ~ 21060 ~ 12062 ~ 8960 ~ 14580 ~ 14562 ~ 8960 ~ 120

                Loading...

                1. 1

                Categorie relative a Filiere