Giorni spedizione |
|
---|
?* Informazioni su tempi di consegna
Vite a ricircolo di sfere con chiocciola rotante, BNT
THK
Recommended tip shape designations are now selectable. If you choose a recommended tip shape designation, accuracy for non-standard lengths can be specified in units of 1 mm, even for C8 and C10 models.
[Features]
· Because a screw hole for mounting is machined on the rectangular ball screw nut, the main body of the machinery can be mounted compactly as is without a housing.
Consegna da : | Preventivo |
---|
Vite a ricircolo di sfere, senza lavorazione sulle estremità albero, MDK
THK
[Features]
· This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
· Additional work on screw shaft ends can be easily performed.
A partire da∗ : | 420.74 € |
---|---|
Consegna da : | 44 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere con chiocciola rotante, MTF
THK
Recommended tip shape designations are now selectable. If you choose a recommended tip shape designation, accuracy for non-standard lengths can be specified in units of 1 mm, even for C8 and C10 models.
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
Consegna da : | Preventivo |
---|
Vite a ricircolo di sfere con chiocciola rotante, BTK
THK
[Features]
· Rolling ball screw with a new circulation structure that achieves DN values of 100,000.
Compatible with the nut outer diameter and mount hole size of conventional BTK shape products, so it can be used as a replacement.
Consegna da : | 34 giorni |
---|
Vite a ricircolo di sfere con chiocciola rotante, JPF
THK
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· An abundant standardized lineup is available so you can select the product that's optimal for your application.
· Lead accuracy to achieves a C7 class: Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.
· Screw shaft ball rolling surface roughness of 0.20a or less: After rolling is completed, the ball rolling surface of the screw shaft undergoes a special surface polishing process, finishing the surface at a roughness of 0.20a or less, identical to the precision ball screw product line after screw grinding.
· Ball screw nut ball rolling surface grinding and finishing: Rotating ball screw nuts also undergo a ball rolling surface grinding and finishing process just like precision ball screws, which provides durability and smooth operation.
· High dust-proofing effectiveness: Because the ball screw nut has either a compact labyrinth seal or a brush seal built-in, it operates with low friction and high level dust-proofing, lengthening the life of ball screws.
Consegna da : | Preventivo |
---|
Vite a ricircolo di sfere con chiocciola rotante, WTF
THK
[Features]
· High speed sending ball screw which achieves DN values of 100,000 through the adoption of a new circulation structure.
· Compatible with the nut outer diameter and mount hole size of conventional WTF shape products, so it can be used as a replacement.
(WHF1530, WHF2040, WHF2550)
Consegna da : | Preventivo |
---|
Vite a ricircolo di sfere con chiocciola rotante, BLK
THK
Recommended tip shape designations are now selectable. If you choose a recommended tip shape designation, accuracy for non-standard lengths can be specified in units of 1 mm, even for C8 and C10 models.
Consegna da : | Preventivo |
---|
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 4, passo: 1
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
A partire da∗ : | 631.09 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 20, passo: 10
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
A partire da∗ : | 834.57 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 8, passo: 2
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
A partire da∗ : | 564.37 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover the screw shafts.
· BNK Type: Dimensions Table—A15-116 Standardized ball screw with a screw shaft diameter of 4 to 25 mm, and lead of 1 to 20 mm.
A partire da∗ : | 581.47 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Consegna da : | 44 giorni |
---|
Vite a ricircolo di sfere, senza lavorazione sulle estremità albero, BNF
THK
[Features]
· This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
· Additional work on screw shaft ends can be easily performed.
· Also, a variety of nut shapes are available to suit different purposes such as the BNFN shape double nut, BNF shape single nut, BIF shape offset preload nut, MDK shape miniature ball screw, and MBF shape.
· Dust-proof: The following model number nuts have labyrinth seals mounted.
A partire da∗ : | 821.99 € |
---|---|
Consegna da : | 44 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 6, passo: 1
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
A partire da∗ : | 644.77 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
A partire da∗ : | 182.78 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· This rotary ball screw is a rotary ball screw unit with a unified structure made up of a ball screw nut and a support bearing.
· The support bearing is a large angular bearing with a contact angle of 60° that provides rigidity in the axial direction where more balls are placed.
· The BLR type is available in precision ball screw and rolled ball screw specifications.
· Smooth operation: provides smooth operation in comparison to the straight line movement of rack and pinion systems.
· Also, because the screw shaft does not rotate with ball screw nut drive, there is no jumping rope phenomenon, operation is quiet, and heat produced by the unit is reduced.
A partire da∗ : | 736.07 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 8, passo: 1
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
[Dust-proofing and lubrication.]
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
A partire da∗ : | 646.49 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, senza lavorazione sulle estremità albero, MBF
THK
[Features]
· This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
· Additional work on screw shaft ends can be easily performed.
· Also, a variety of nut shapes are available to suit different purposes such as the BNFN shape double nut, BNF shape single nut, BIF shape offset preload nut, MDK shape miniature ball screw, and MBF shape.
· Dust-proof: The following model number nuts have labyrinth seals mounted.
Consegna da : | 44 giorni |
---|
Vite a ricircolo di sfere, senza precarico (unità chiocciola singola) BLK
THK
[Features]
· Uses an end cap method for high speed rotation, providing stable operation.
A partire da∗ : | 375.55 € |
---|---|
Consegna da : | 4 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, senza precarico (unità chiocciola singola) WTF
THK
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
· Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.
· After rolling is completed, the ball rolling surface of the screw shaft undergoes a special surface polishing process, finishing the surface at a roughness of 0.20a or less, identical to the precision ball screw product line after screw grinding.
· Rotating ball screw nuts also undergo a ball rolling surface grinding and finishing process just like precision ball screws, which provides durability and smooth operation.
· After rolling is completed, the screw shaft is treated with either high frequency or charcoal immersion quenching, followed by a special surface grinding and finishing process. Due to the manufacturing methods used, this product is comparatively cheaper than the precision ball screw line made through grinding.
· Because the ball screw nut has either a compact labyrinth seal or a brush seal built-in, it operates with low friction and high level dust-proofing, lengthening the life of ball screws.
A partire da∗ : | 410.61 € |
---|---|
Consegna da : | 24 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, senza precarico (unità chiocciola singola) BNT
THK
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
A partire da∗ : | 227.85 € |
---|---|
Consegna da : | Stesso giorno |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, senza precarico (unità chiocciola singola) CNF
THK
A no preloading type rolling ball screw with a single unit CNF shape nut.
[Features]
· Due to the large lead, this unit can be combined with long nuts in four types of load conditions, and has a long life.
A partire da∗ : | 538.30 € |
---|---|
Consegna da : | 44 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, senza precarico (unità albero singola) TS
THK
[Features]
· Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.
Consegna da : | 4 giorni |
---|
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 10, passo: 10
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
A partire da∗ : | 1,038.07 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 10, passo: 2
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
A partire da∗ : | 612.25 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 10, passo: 4
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
A partire da∗ : | 537.00 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 14, passo: 2
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
A partire da∗ : | 518.20 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 15, passo: 10
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
A partire da∗ : | 819.19 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 15, passo: 20
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
A partire da∗ : | 808.70 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 20, passo: 20
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
A partire da∗ : | 1,007.32 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 12, passo: 2
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
A partire da∗ : | 622.50 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 14, passo: 4
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
A partire da∗ : | 518.20 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 14, passo: 8
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
A partire da∗ : | 818.71 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 16, passo: 16
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
· BNK A ball screw with shape standardization to screw shaft diameter ø4 - 25 mm and lead 1 - 20 mm.
A partire da∗ : | 887.59 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 25, passo: 20
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
A partire da∗ : | 1,460.49 € |
---|---|
Consegna da : | 5 giorni |
*Prezzo unitario in configurazione base
Vite a ricircolo di sfere rullate con chiocciola rotante – modello BLR
THK
[Features]
· This rotary ball screw is a rotary ball screw unit with a unified structure made up of a ball screw nut and a support bearing.
· The support bearing is a large angular bearing with a contact angle of 60° that provides rigidity in the axial direction where more balls are placed.
· BLRThe BLR type is available in precision ball screw and rolled ball screw specifications.
· Smooth operation: provides smooth operation in comparison to the straight line movement of rack and pinion systems. Also, because the screw shaft does not rotate with ball screw nut drive, there is no jumping rope phenomenon, operation is quiet, and heat produced by the unit is reduced.
· Quiet operation even during high-speed rotation. The BLR type uses an end cap system to scoop up balls extremely quietly, and because the balls are circulated by passing through the interior of the ball screw nut, operation remains quiet even during high-speed rotation.
· High rigidity: Compared to screw shaft rotation, axial direction rigidity is drastically improved due to the large support bearing.
· Compact: Because the ball screw nut and support bearing are an integrated structure, the design achieves both high accuracy and a compact size.
· Simple mounting: Just mount the bolt in the housing to create a simple ball screw nut rotation mechanism.
Consegna da : | Preventivo |
---|
A partire da∗ : | 114.60 € |
---|---|
Consegna da : | 4 giorni |
*Prezzo unitario in configurazione base
Marchio |
---|
Serie prodotto |
CAD |
A partire da∗ |
Consegna da : |
Specifiche |
Categorie dei prodotti |
Profilo flangia |
Grado di precisione |
D.E. albero vite d(φ) |
Piombo(mm) |
Marchio | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Serie prodotto | Vite a ricircolo di sfere, senza lavorazione sulle estremità albero, MDK | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 4, passo: 1 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 20, passo: 10 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 8, passo: 2 | Vite a ricircolo di sfere, senza lavorazione sulle estremità albero, BIF | Vite a ricircolo di sfere, senza lavorazione sulle estremità albero, BNF | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 6, passo: 1 | Vite a ricircolo di sfere, senza precarico (unità chiocciola singola) BTK | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 8, passo: 1 | Vite a ricircolo di sfere, senza lavorazione sulle estremità albero, MBF | Vite a ricircolo di sfere, senza precarico (unità chiocciola singola) BLK | Vite a ricircolo di sfere, senza precarico (unità chiocciola singola) WTF | Vite a ricircolo di sfere, senza precarico (unità chiocciola singola) BNT | Vite a ricircolo di sfere, senza precarico (unità chiocciola singola) CNF | Vite a ricircolo di sfere, senza precarico (unità albero singola) TS | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 10, passo: 10 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 10, passo: 2 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 10, passo: 4 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 14, passo: 2 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 15, passo: 10 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 15, passo: 20 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 20, passo: 20 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 12, passo: 2 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 14, passo: 4 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 14, passo: 8 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 16, passo: 16 | Vite a ricircolo di sfere, prodotto completo di punta albero (BNK), diametro albero: 25, passo: 20 | Vite a ricircolo di sfere rullate con chiocciola rotante – modello BLR | |||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A partire da∗ | - | 420.74 € *Prezzo unitario in configurazione base | - | - | - | - | - | 631.09 € *Prezzo unitario in configurazione base | 834.57 € *Prezzo unitario in configurazione base | 564.37 € *Prezzo unitario in configurazione base Sconto volumi elevati | 581.47 € *Prezzo unitario in configurazione base | - | 821.99 € *Prezzo unitario in configurazione base | 644.77 € *Prezzo unitario in configurazione base | 182.78 € *Prezzo unitario in configurazione base | 736.07 € *Prezzo unitario in configurazione base | 646.49 € *Prezzo unitario in configurazione base | - | 375.55 € *Prezzo unitario in configurazione base | 410.61 € *Prezzo unitario in configurazione base | 227.85 € *Prezzo unitario in configurazione base Sconto volumi elevati | 538.30 € *Prezzo unitario in configurazione base | - | 1,038.07 € *Prezzo unitario in configurazione base | 612.25 € *Prezzo unitario in configurazione base | 537.00 € *Prezzo unitario in configurazione base | 518.20 € *Prezzo unitario in configurazione base | 819.19 € *Prezzo unitario in configurazione base | 808.70 € *Prezzo unitario in configurazione base | 1,007.32 € *Prezzo unitario in configurazione base | 622.50 € *Prezzo unitario in configurazione base | 518.20 € *Prezzo unitario in configurazione base | 818.71 € *Prezzo unitario in configurazione base | 887.59 € *Prezzo unitario in configurazione base | 1,460.49 € *Prezzo unitario in configurazione base | - | 114.60 € *Prezzo unitario in configurazione base Sconto volumi elevati |
Consegna da : | Preventivo | 44 giorni | Preventivo | 34 giorni | Preventivo | Preventivo | Preventivo | 5 giorni | 5 giorni | Stesso giorno | 5 giorni | 44 giorni | 44 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 44 giorni | 4 giorni | 24 giorni | Stesso giorno | 44 giorni | 4 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | 5 giorni | Preventivo | 4 giorni |
Specifiche |
| ||||||||||||||||||||||||||||||||||||
Categorie dei prodotti | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | A / Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere rullata | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere di precisione | Vite a ricircolo di sfere rullata | Parte abbinata alla vite a ricircolo di sfere |
Profilo flangia | Supporto | Tipo miniaturizzato | Tipo miniaturizzato | Profilo rotondo, 2 lati piatti vite di fermo | Profilo tondo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Rettangolare | Profilo rotondo, 2 lati piatti vite di fermo | Rettangolare | Profilo tondo | Profilo tondo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Supporto | Profilo tondo | - | Rettangolare | Profilo rotondo, 2 lati piatti vite di fermo | Rettangolare | Profilo rotondo, 2 lati piatti vite di fermo | Rettangolare | Rettangolare | Rettangolare | Profilo rotondo, 2 lati piatti vite di fermo | Profilo rotondo, 2 lati piatti vite di fermo | Rettangolare | Rettangolare | Rettangolare | Profilo tondo | - |
Grado di precisione | C7 / C10 / C8 | C3 / C5 / C7 | C7 / C8 | C7 / C10 / C8 | C7 / C10 / C8 | C7 / C10 / C8 | C7 / C10 / C8 | C3 / C5 / C7 | C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 | C5 / C7 | C5 / C7 | C3 / C5 / C7 | - | C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 | - | - | - | - | A / C7 / C10 / C8 | C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 | C5 / C7 | C5 / C7 | C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 | C5 / C7 | C5 / C7 | C5 / C7 | C7 / C10 / C8 | - |
D.E. albero vite d(φ) | 14 ~ 45 | 4 ~ 14 | 6 ~ 12 | 10 ~ 50 | 14 ~ 40 | 15 ~ 50 | 15 ~ 50 | 4 | 20 | 8 | 12 | 16 ~ 50 | 16 ~ 50 | 6 | 10 ~ 50 | 8 | 8 | 4 ~ 14 | 15 ~ 50 | 15 ~ 50 | 14 ~ 45 | 15 ~ 30 | 10 ~ 50 | 10 | 10 | 10 | 14 | 15 | 15 | 20 | 12 | 14 | 14 | 16 | 25 | 20 ~ 36 | - |
Piombo(mm) | 4 ~ 12 | 1 ~ 5 | 1 ~ 2 | 4 ~ 16 | 4 ~ 10 | 20 ~ 100 | 10 ~ 50 | 1 | 10 | 2 | 5 | 5 ~ 12 | 5 ~ 12 | 1 | 4 ~ 16 | 10 | 1 | 1 ~ 4 | 10 ~ 50 | 20 ~ 100 | 4 ~ 12 | 30 ~ 60 | 4 ~ 100 | 10 | 2 | 4 | 2 | 10 | 20 | 20 | 2 | 4 | 8 | 16 | 20 | 20 ~ 36 | - |
Loading...
Vi chiediamo gentilmente di aiutarci a migliorare il nostro sito
É gradito un commento sull'e-Catalog MISUMI
Grazie della collaborazione.
Vi preghiamo di utilizzare l'apposito modulo di richiesta.