TRUSCO NAKAYAMA Dispositivi per strumentazione

For scroll chucks compatible with front mounting.

[Features]· : It is ideal for table mounting, arc cutting, boring counterbore, etc., and can also be used vertically.·The table rotates 4 degrees for each rotation of the handle.[Applications]· For an accurate angle calculation.

[Features]· Centering and installation of flange and scroll chucks can be performed easily and accurately as a center correcting shaft is used.

[Features]· It allows easy scribing.· Milling chuck and side lock holder can be used to easily attach it to various machines.· Since it uses a spring to move in the axial direction, it can also scribe on a tapered surface.[Applications]· Can be attached to milling chucks, etc., for scribing.

It allows easy scribing. Easily attached to any machine

[Features]· It allows easy scribing.· Milling chuck and side lock holder can be used to easily attach it to various machines.· Since it uses a spring to move in the axial direction, it can also scribe on a tapered surface.· The scribe part can be fixed by the lever.· A carbide chip is used at the scribe part.[Applications]· Can be attached to milling chucks, etc., for scribing.

It allows easy scribing. A carbide tip is used for the scribe tip

[Features]· Can be used with great convenience for the centering of all lathes, planing boards, milling machines, shaper presses, and drilling machines when placed underneath various cutting bits, jigs, and other items.· It can also be used for thickness adjustment.[Applications]· For centering work.

[Features]· Use to change or extend the size of Morse tapers.

[Features]· Used to change Jacobs taper JT6 (2 1/2) of drill press to Morse taper (MT).[Applications]· Used to change Jacobs taper JT6 (2 1/2) of drill press to Morse taper (MT).

[Features]· Straight shafts are changed to Morse tapered shafts in the milling machine and machining center.[Applications]· Straight shafts are changed to Morse tapered shafts in the milling machine and machining center.

[Features]· Used for taking out drills from drill sleeves or drill sockets.

[Features]· Use when making the drill or reamer Morse taper size smaller. (Such as when aligning to the spindle taper size of the drilling machine being used)

[Caratteristiche] Vite a T per regolare la posizione della scala di riferimento. Peso (g): 150

[Features]· Can be used with great convenience for the centering of all lathes, planing boards, milling machines, shaper presses, and drilling machines when placed underneath various cutting bits, jigs, and other items.· It can also be used for thickness adjustment.[Applications]· For centering work.