Piedi di livellamento（pagina 2）

?* Informazioni su tempi di consegna

• 

  Livellatori

  HALDER

  Per il livellamento di macchine e impianti su piani d'appoggio disallineati.
  L'aggiustamento verticale dei livellatori autobloccanti è facilitato dalla filettatura a passo fine con finecorsa di sicurezza. Tutti gli elementi hanno un foro passante centrale per il fissaggio. Un blocco meccanico limita l'altezza massima.

  • Sconto volumi elevati

  CAD ：

  3D

  A partire da∗ ：	5.24 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  LS.A - Elementi di livellamento -Base in tecnopolimero stelo in acciaio

  ELESA

  CAD ：

  2D / 3D

  A partire da∗ ：	3.26 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegno Modello a montaggio alto M

  KURASHIKI KAKO

  Demonstrates high vibration-proofing performance with a compact body. Selection is possible from a wide variety to suit the application.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	27.75 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Regolatori per carichi pesanti con gomma (Accoppiamento con cuscinetto) D-H-R

  DAIWARASHI

  An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
  
  [Features]
  · Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
  · Groove processing is applied to the rear surface of the rubber to make it non-slippery.
  · Effectively protects floors.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	35.01 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore recipiente standard a diametro piccolo D-F / D-F-C

  DAIWARASHI

  An adjuster whose screw and base have small diameters
  
  [Features]
  · Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
  · Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
  · A light load type with a receiver diameter that is also small.
  · Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	2.18 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore KC-30-KS

  TAKIGEN

  The bottom part is made of polyamide and features excellent chemical-resistance.

  CAD ：

  2D / 3D

  A partire da∗ ：	2.97 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  piedino di livellamento rapido KC-24-3

  TAKIGEN

  Height adjustment can be easily performed just by pushing a button. After fixing, fine adjustments are possible by rotating the leg portion.

  CAD ：

  2D

  A partire da∗ ：	10.05 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  piedino in inox (K-150)

  TAKIGEN

  The perfect solution for static electricity related issued for precision machinery.

  A partire da∗ ：	36.95 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  adattatore livello KC-280

  TAKIGEN

  The rubber on the bottom portion is flame-retardant and non-migratory. Installation is easy since there is a Phillips head slot has been provided on the back of the screw part.

  CAD ：

  2D / 3D

  A partire da∗ ：	3.93 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  piede di livellamento inox per carichi pesanti K-1277-B

  TAKIGEN

  Stainless steel with superior corrosion resistance.

  CAD ：

  2D / 3D

  A partire da∗ ：	105.66 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Supporti di livellamento 111A Diamentro Ruota 32-38 mm

  TAKIGEN(HAMMER CASTER)

  A glide in which an adjusting screw is inserted into a resin base. The product is used widely for furniture, etc., and is essential for the protection of floor surfaces and carpets.

  A partire da∗ ：	1.52 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Dadi di regolazione

  SUN FASTENER

  [Features]
  · The adjusting nut is a nut that includes a leg part. Commercially-available bolts can be installed on machinery to easily mount an adjusting bolt.
  · Costs are drastically reduced since commercially-available bolts can be used.
  · Since the load of the product is also received by the bolt head part, it can also be used for heavy loads and heavy weights.
  · Since re-using (recycling) is easy, it contributes to the effective use of resources.
  · Installation of machinery can be performed by temporarily placing and then performing adjustments, enabling accurate positioning to be performed easily.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	1.54 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Regolazione per gamba rifinita

  HIKARI

  Can be attached to smart legs (round leg / square leg).

  A partire da∗ ：	2.12 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Piede livellatore (500/600 kg) (Con piastra di arresto)

  TRUSCO NAKAYAMA

  · Features an anchor hole for fixing to the floor.
  · A hole is provided to the pedestal part and to enable it to be fixed to the floor with an anchor. Used to prevent equipment movement caused by intense vibrations.
  · Machine tools, vending machines, conveyors, work benches, control panels, and scientific instruments.

  A partire da∗ ：	6.74 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Piede livellatore antisismico (200kg)

  TRUSCO NAKAYAMA

  · Can withstand earthquakes of seismic intensity 7 class since a material having high earthquake-resistant properties is used for the bottom surface material.
  · Impact absorption rate is 90% or greater and responds to vibration in all directions, up/down, left/right, and front/back, with super elasticity and excellent adhesion.
  · Since detaching is easy, it can be moved after installation as well. Since there is no need for construction work to drill in an anchor, floors are not damaged.
  · Seismic-resistant load is 60 kg and the mat diameter is 60 mm.
  · Work benches, conveyors, computer racks, control panels, scientific equipment, OA equipment, various appliances, etc.

  A partire da∗ ：	27.14 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Piede livellatore (500/600kg)

  TRUSCO NAKAYAMA

  · A resin cover is attached to the pedestal portion and prevents the damaging of floors.
  · Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.

  A partire da∗ ：	7.10 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  GOMMA OHNO, piede di livellamento antivibrazioni con base in gomma, smorzamento vibrazioni verticali

  OHNORUBBER

  [Features]
  · Devices are securely fixed by the friction of rubber.
  · A non-polluting material is used for the rubber part.
  · A wide variety of types are available and the optimal item can be selected depending on the usage conditions and application.
  
  [Uses]
  · Vibration prevention for various industrial equipment.
  · Level adjustments for equipment height.
  · Installation on floor surfaces.
  · Vibration prevention for various industrial equipment, level adjustments for equipment height, and installation on floor surfaces.

  A partire da∗ ：	7.86 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  LS.A-SST - Elementi di livellamento -Base in tecnopolimero stelo in acciaio INOX

  ELESA

  CAD ：

  2D / 3D

  A partire da∗ ：	8.01 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  LSQ.A-SST - Elementi di livellamento -Base in tecnopolimero stelo in acciaio INOX

  ELESA

  A partire da∗ ：	5.06 €
  Consegna da ：	Preventivo

  *Prezzo unitario in configurazione base

• 

  LV.A - Elementi di livellamento -Base in tecnopolimero stelo in acciaio

  ELESA

  CAD ：

  2D / 3D

  A partire da∗ ：	4.27 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  LV.A-125-ACV - Elementi di livellamento -Base in tecnopolimero stelo in acciaio

  ELESA

  CAD ：

  2D / 3D

  A partire da∗ ：	22.24 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  LV.A-125-APS - Elementi di livellamento -Base in tecnopolimero stelo in acciaio

  ELESA

  CAD ：

  2D / 3D

  A partire da∗ ：	17.45 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  LV.A-ELK - Elementi di livellamento -Base e manopola in tecnopolimero stelo in acciaio

  ELESA

  CAD ：

  2D / 3D

  A partire da∗ ：	21.30 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  LV.A-ESD-C - Elementi di livellamento -Base in tecnopolimero conduttivo ESD stelo in acciaio

  ELESA

  A partire da∗ ：	7.72 €
  Consegna da ：	Preventivo

  *Prezzo unitario in configurazione base

• 

  LV.F - Elementi di livellamento per fissaggio a terra -Base in tecnopolimero stelo in acciaio

  ELESA

  CAD ：

  2D / 3D

  A partire da∗ ：	4.62 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Piedi di livellamento/Salvaspazio

  MISUMI

  • Sconto volumi elevati

  CAD ：

  2D / 3D

  A partire da∗ ：	4.60 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Piede di livellamento/Salvaspazio

  MISUMI

  • Sconto volumi elevati

  CAD ：

  2D / 3D

  A partire da∗ ：	8.50 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Cuneo alto

  KURASHIKI KAKO

  Compact and with high performance. High precision leveling and mounting are possible thanks to the wedge mechanism.
  
  [Features]
  · A type with improved rigidity and leveling accuracy that can be used with small to medium sized machinery.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	198.79 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Sostegno Modello a montaggio alto LM

  KURASHIKI KAKO

  [Features]
  · Demonstrates high vibration-proofing performance with a compact body.
  · An LM type handle that also facilitates level adjustments.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	34.77 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatori per fissaggio ad ancoraggio D-EII / D-EII-ST

  DAIWARASHI

  A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
  
  [Features]
  · Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
  · Can easily be fixed using an anchor bolt.
  · Please use an anchor bolt.
  · Please use a 12 mm anchor bolt.
  · Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
  · Note: The screw rotates and tilts somewhat.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	5.39 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatori per fissaggio ad ancoraggio con recipiente con nervature di rinforzo D-EV

  DAIWARASHI

  [Features]
  · It has been pointed out that the receiver of D-E II is easily bent since its thickness is zero. In response to this, the product has been modified to have about twice the strength of the conventional product, not by changing the plate thickness, but by increasing its hardness.
  · A steel plate reinforced type adjuster for which the base for anchor fixing includes ribs.
  · Please be advised that the model number in VONA has been changed from "D-E V" to "D-E5."

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	5.90 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatori per fissaggio ad ancoraggio (Modello a base larga) D-E-W

  DAIWARASHI

  A medium load type adjuster for anchor fixing in which the base is wide and stable
  
  [Features]
  · By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
  · Note: The screw shaft tilts somewhat

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	11.33 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatori con plastica per ancoraggio D-EIII

  DAIWARASHI

  An adjuster for anchor fixing with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-E III" to "D-E3."
  
  [Features]
  · Can easily be fixed using an anchor bolt.
  · Does not stain or damage floors since a special plastic is molded into the receiver.
  · The plastic part has elasticity, feels good to touch, and features excellent aging resistance and high temperature resistance.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	6.45 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore per Angoli D-DIII

  DAIWARASHI

  A space saving type adjuster that can be neatly stored in corners. Note: Please be advised that the model number in VONA has been changed from "D-D II" to "D-D2."
  
  [Features]
  · A special adjustment bolt for corners.
  · Please use together with D-D I.
  · Please use accessories such as hex nuts, etc.
  · The portion that makes contact with the wall is folded.
  · As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
  · According to our in-house experiments, the strength has been enhanced by approximately four times.
  · In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal receiver.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	3.04 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Sistema di prevenzione al movimento con regolatori attraverso vite per fissaggio tramite ancoraggio D-J-EII

  DAIWARASHI

  An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
  
  [Features]
  · The structure is such that some space exists between the receiver and bolt.
  · This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
  · It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
  · It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
  · Even when a running machine is stopped, the bolts will not move and falling over will not occur.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	6.17 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Piedini di livellamento con movimento a vite e anti-inversione modello D-J-A

  DAIWARASHI

  A standard receiver type adjuster in which the horizontal shaking of the screw shaft part is completely locked.
  
  [Features]
  · The structure is such that some space exists between the receiver and bolt.
  · This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
  · It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
  · It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
  · Even when a running machine is stopped, the bolts will not move and falling over will not occur.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	3.71 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatori per superfici inclinate D-U-A

  DAIWARASHI

  A standard type adjuster for slopes in which the screw shaft part tilts even more.
  
  [Features]
  The receiver part has a larger hole· than the D-A type in order to enable it to receive the spherical structure of the upper part.
  · The spherical structure is divided into a sphere and a receiver.
  · The receiver has undergone spherical processing to enable the sphere to moves smoothly.
  · When M12/M16/M20 bolts are used, in the case of M16/M20, it is limited to about 15° since the hexagonal part comes in contact with the spherical portion.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	7.81 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatori per superfici inclinate per fissaggio tramite ancoraggio D-U-EII

  DAIWARASHI

  An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."
  
  [Features]
  · The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
  · The spherical structure is divided into a sphere and a receiver.
  · The receiver has undergone spherical processing to enable the sphere to moves smoothly.
  · M12/M16/M20 bolts can be used.
  · The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	10.04 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore - Recipiente in plastica D-G / D-GII

  DAIWARASHI

  An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."
  
  [Features]
  · A rubber cover is used for the entire receiver, and an iron core is included inside.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	10.81 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatori per carichi pesanti (Accoppiamento con cuscinetto Thrust) WD-C / WD-C, S

  DAIWARASHI

  An adjuster for heavy weights with a thrust bearing that enables smooth leveling
  
  [Features]
  · The receiver is a forged item.
  · Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
  · D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
  · Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	6.61 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore per carichi pesanti (Accoppiamento con cuscinetto) D-H

  DAIWARASHI

  An adjuster for heavy weights with a built-in thrust bearing
  
  [Features]
  · Suitable for the adjustment of heavy machinery.
  · Stability is outstanding since a large diameter bolt is used.
  · Smooth adjustments can be made even for non-heavy machinery.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	30.18 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatore per carico pesante (Modello a vite lunga) D-C-L/D-C-L S

  DAIWARASHI

  A long screw adjuster with a wide adjustment range
  
  [Features]
  · Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
  A limited quantity of 500 mm total length products are available for M16 and M20.
  · D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	10.24 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Regolatore per carichi pesanti (Modello per recipiente ampio) D-CIII / D-CIII, S / D-CIII-W

  DAIWARASHI

  A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
  
  [Features]
  · The receiver of the stainless steel D-C III is a forged item.
  · D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	10.30 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Regolatori per carichi pesanti (Modello a recipiente ampio) (Accoppiamento con cuscinetto Thrust) WD-CIII / WD-CIII-S

  DAIWARASHI

  A wide-base type adjuster for heavy weights with a thrust bearing that is capable of smooth leveling. Note: Please be advised that the model number in VONA has been changed from "WD-C III" to "WD-C3."

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	12.58 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Regolatori per carichi pesanti con gomma (Accoppiamento con cuscinetto) WD-C-R

  DAIWARASHI

  A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Sconto volumi elevati

  CAD ：

  2D

  A partire da∗ ：	8.92 €
  Consegna da ：	3 giorni

  *Prezzo unitario in configurazione base

Loading...