Raccordi in fluororesina（Tipo：Corpo principale raccordo）
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
Raccordo Pillar super 300, gomito maschio
PILLAR
The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
◆ Reduction in tightening torque by updated sealing mechanism
Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
◆ Greatly enhanced workability due to simplified tightening control
The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
◆ Excellent sealing performance
Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
◆ Radical reduction in micro-bubble and liquid accumulation
Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
◆ high working pressure/temperature
The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.Configura oraA partire da∗ ： 46.58 € Consegna da ： 13 giorni *Prezzo unitario in configurazione base
-
Raccordo Pillar super 300, connettore maschio
PILLAR
The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
◆ Reduction in tightening torque by updated sealing mechanism
Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
◆ Greatly enhanced workability due to simplified tightening control
The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
◆ Excellent sealing performance
Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
◆ Radical reduction in micro-bubble and liquid accumulation
Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
◆ high working pressure/temperature
The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.Configura oraA partire da∗ ： 42.42 € Consegna da ： 13 giorni *Prezzo unitario in configurazione base
-
- In Offerta
LQ1L, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Modello gomito
SMC
A fluoropolymer male elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 16.45 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
LQ1L, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Modello gomito
SMC
A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube size can be changed.
· Easy nut fastening.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 16.45 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Male Connector LQ3H-M Metric Size Fluoropolymer Fittings / Hyper Fittings
SMC
A fluoropolymer fitting with a flared collet structure.
[Features]
· Triple-seal construction.
· Excellent assemblability.
· Excellent flow-through characteristics.
· Able to withstand thermal stress.
· For use at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 9.05 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Attacchi in fluororesina / Giunti
MISUMI
Non sono necessari strumenti speciali per il serraggio. Raccordo in fluoropolimero ad alta resistenza chimica.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 18.77 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Attacchi in fluororesina / Giunto a T
MISUMI
Non sono necessari strumenti speciali per il serraggio. Un raccordo interamente in fluoropolimero ad alta resistenza chimica.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 24.94 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Attacchi in fluororesina / Connettore filettato / Connettore con foro passante
MISUMI
Non sono necessari strumenti speciali per il serraggio. Un raccordo interamente in fluoropolimero ad alta resistenza chimica.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 13.10 € Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Attacchi in fluororesina / Gomito a 90° / Filettati
MISUMI
Per il serraggio non sono necessari strumenti speciali. Raccordo in fluoropolimero ad alta resistenza chimica.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 23.42 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Attacchi in fluororesina / Gomito a 90° / Giunto
MISUMI
Non sono necessari strumenti speciali per il serraggio. Un raccordo interamente in fluoropolimero ad alta resistenza chimica.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 25.82 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
Attacchi in fluororesina / Giunti con gradino
MISUMI
Non sono necessari strumenti speciali per il serraggio. Un raccordo interamente in fluoropolimero ad alta resistenza chimica.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 20.02 € Consegna da ： 5 giorni *Prezzo unitario in configurazione base
-
- In Offerta
LQ1H, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Modello connettore
SMC
A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube size can be changed.
· Easy nut fastening.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 14.90 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, filettatura maschio, dimensioni in pollici
SMC
A fluoropolymer male connector fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 14.92 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, filettatura femmina, dimensioni metriche
SMC
A fluoropolymer female connector fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 23.44 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, filettatura femmina, dimensioni in pollici
SMC
A fluoropolymer female connector fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 26.63 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, gomito con filettatura femmina, dimensioni metriche
SMC
A fluoropolymer female elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 27.95 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, gomito con filettatura femmina, misura in pollici
SMC
A fluoropolymer female elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 27.95 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
- In Offerta
LQ1R, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Fitting a T
SMC
A fluoropolymer fitting with a quadruple-sealing construction.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C
· The trapezoidal thread allows for the application of high levels of torque. The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 33.97 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, raccordo a T con filettatura maschio, dimensioni in pollici
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· Strong resistance to tube bending and deformation.
· Easy nut fastening
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 33.97 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, raccordo a T con filettatura femmina, dimensioni metriche
SMC
A fluoropolymer female run tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 46.60 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Female Run Tee LQ1R-F Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A fluoropolymer female run tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 42.27 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, raccordo a T con filettatura maschio, dimensione metrica
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· Strong resistance to tube bending and deformation.
· Easy nut fastening
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 33.97 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, raccordo a T con filettatura maschio, dimensioni in pollici
SMC
A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube size can be changed.
· Easy nut fastening.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 33.97 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, raccordo a T con filettatura femmina, dimensione metrica
SMC
A fluoropolymer female branch tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 42.27 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Female Branch Tee LQ1B-F Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A fluoropolymer female branch tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 42.27 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
- In Offerta
LQ1E, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a gomito
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· Shows strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· For use at 200°C. The trapezoidal thread prevents the angled insertion of nuts.
· The reducer system allows you to switch tube sizes without having to change the body itself.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 19.45 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
LQ1E, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a gomito
SMC
A union elbow with outstanding flow-through characteristics with minimized liquid pooling.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 19.52 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
LQ1T, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a T
SMC
A fluoropolymer union tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 25.27 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
LQ1T, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a T
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· Shows strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· For use at 200°C. The trapezoidal thread prevents the angled insertion of nuts.
· The reducer system allows you to switch tube sizes without having to change the body itself.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 25.68 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Raccordi in fluoroplastica / Raccordi per guaine in fluoropolimero, serie LQ1, Raccordo per montaggio a pannello, dimensioni metriche
SMC
A panel mount union with outstanding flow-through characteristics with minimized liquid pooling.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Easy nut fastening.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 21.27 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Raccordi in fluoroplastica / Raccordi per guaine in fluoropolimero, serie LQ1, Raccordo per montaggio a pannello, dimensioni in pollici
SMC
A fluoropolymer panel mount union fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 21.73 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Union Flange LQ1F Metric Size Fluoropolymer Fittings / Hyper Fittings
SMC
A metric size type fluoropolymer fitting with outstanding sealing performance and leakage-prevention reliability.
[Features]
· Quadruple-seal construction.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 176.47 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Union Flange LQ1F Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A fluoropolymer fitting with a trapezoidal thread that allows for the application of high levels of torque.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 176.40 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per guaine in fluoropolimero, serie LQ1, raccordo con riduttore, dimensioni metriche
SMC
A reducing type fluoropolymer union elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 65.29 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, raccordo con riduttore, dimensioni in pollici
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· The quadruple-sealing construction provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· Strong resistance to tube bending and deformation.
· Easy nut fastening
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 50.73 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, raccordo a T, misura metrica
SMC
A fluoropolymer fitting with outstanding sealing performance and leakage-prevention reliability.
[Features]
· Quadruple-seal construction.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 54.87 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, raccordo a T, misura in pollici
SMC
A reducing type fluoropolymer union tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 54.87 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per guaine in fluoropolimero, serie LQ1, raccordo riduttore per montaggio a pannello, dimensioni metriche
SMC
A fluoropolymer reducing-type panel mount union fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 206.10 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per guaine in fluoropolimero, serie LQ1, raccordo riduttore, dimensioni metriche
SMC
A reducing type union with outstanding flow-through characteristics with minimized liquid pooling.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Easy nut fastening.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 71.29 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, raccordo riduttore, misura in pollici
SMC
A reducing-type fluoropolymer union fitting for use at temperatures of up to 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 71.29 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, gomito salvaspazio con dado per raccordo, misura metrica
SMC
The LQ1E-SS is a space-saving fluoropolymer elbow fitting from SMC.
[Features]
· Unique quadruple-sealing construction (PAT.) provides excellent sealing performance.
· High leakage-prevention reliability.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 63.74 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, Gomito salvaspazio con dado per raccordo, misura in pollici
SMC
The LQ1E-SS-R is a reducing-type space-saving fluoropolymer elbow fitting from SMC.
[Features]
· Unique quadruple-sealing construction (PAT.) provides excellent sealing performance.
· High leakage-prevention reliability.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 64.15 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, Gomito salvaspazio con riduttore, dimensioni metriche
SMC
The LQ1E-SS-R is a reducing-type space-saving fluoropolymer elbow fitting from SMC.
[Features]
· Unique quadruple-sealing construction (PAT.) provides excellent sealing performance.
· High leakage-prevention reliability.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 171.61 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, Gomito salvaspazio con riduttore, dimensioni in pollici
SMC
The LQ1E-SS-R is a reducing-type space-saving fluoropolymer elbow fitting from SMC.
[Features]
· Unique quadruple-sealing construction (PAT.) provides excellent sealing performance.
· High leakage-prevention reliability.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 171.61 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, Tee salvaspazio, dimensioni metriche
SMC
A fluoropolymer union tee fitting by SMC.
[Features]
· Metric size.
· The tube can be positioned freely.
· Quadruple-seal construction.
· Offers outstanding flow-through characteristics.
· For use at 200°C.
· Excellent at preventing loosening.
· Strong resistance to tube bending and deformation.
· Easy nut fastening.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 65.65 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da |
| Tipo |
| Materiale corpo principale |
| Tipo di collegamento |
| Raccordo filettatura-tubo |
| Raccordo multipunto filettatura-tubo |
| Raccordo tubo-tubo con diam. uguale |
| Raccordo tubo-tubo con diam. diverso |
| Raccordo tubo/sporgenza tubo |
| Tipo di componente correlato |
| Diam. esterno tubo applicabile (mm) D (D1) |
| D.E. tubo applicabile (mm) D2 |
| D.E. tubo applicabile (mm) D3 |
| D.E. tubo applicabile (pollici) D (D1) |
| D.E. tubo applicabile (pollici) D2 |
| D.E. tubo applicabile (pollici) D3 |
| D.I. tubo applicabile(mm) |
| Con vite di collegamento M (M1) |
| Misura nominale vite di collegamento M (M1) |
| Max. temperatura d'esercizio(°C) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | PILLAR | PILLAR | SMC | SMC | SMC | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC |
| Serie prodotto | LQ1L, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Modello gomito | LQ1L, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Modello gomito | Male Connector LQ3H-M Metric Size Fluoropolymer Fittings / Hyper Fittings | Attacchi in fluororesina / Connettore filettato / Connettore con foro passante | LQ1H, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Modello connettore | LQ1R, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Fitting a T | Female Run Tee LQ1R-F Inch Size Fluoropolymer Fittings / Hyper Fittings | Female Branch Tee LQ1B-F Inch Size Fluoropolymer Fittings / Hyper Fittings | LQ1E, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a gomito | LQ1E, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a gomito | LQ1T, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a T | LQ1T, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a T | Union Flange LQ1F Metric Size Fluoropolymer Fittings / Hyper Fittings | Union Flange LQ1F Inch Size Fluoropolymer Fittings / Hyper Fittings | |||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| A partire da∗ | 46.58 € *Prezzo unitario in configurazione base | 42.42 € *Prezzo unitario in configurazione base | 16.45 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 16.45 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 9.05 € *Prezzo unitario in configurazione base | 18.77 € *Prezzo unitario in configurazione base Sconto volumi elevati | 24.94 € *Prezzo unitario in configurazione base | 13.10 € *Prezzo unitario in configurazione base | 23.42 € *Prezzo unitario in configurazione base Sconto volumi elevati | 25.82 € *Prezzo unitario in configurazione base Sconto volumi elevati | 20.02 € *Prezzo unitario in configurazione base | 14.90 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 14.92 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 23.44 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 26.63 € *Prezzo unitario in configurazione base | 27.95 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 27.95 € *Prezzo unitario in configurazione base | 33.97 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 33.97 € *Prezzo unitario in configurazione base | 46.60 € *Prezzo unitario in configurazione base | 42.27 € *Prezzo unitario in configurazione base | 33.97 € *Prezzo unitario in configurazione base | 33.97 € *Prezzo unitario in configurazione base | 42.27 € *Prezzo unitario in configurazione base | 42.27 € *Prezzo unitario in configurazione base | 19.45 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 19.52 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 25.27 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 25.68 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 21.27 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 21.73 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 176.47 € *Prezzo unitario in configurazione base | 176.40 € *Prezzo unitario in configurazione base | 65.29 € *Prezzo unitario in configurazione base | 50.73 € *Prezzo unitario in configurazione base | 54.87 € *Prezzo unitario in configurazione base | 54.87 € *Prezzo unitario in configurazione base | 206.10 € *Prezzo unitario in configurazione base | 71.29 € *Prezzo unitario in configurazione base | 71.29 € *Prezzo unitario in configurazione base | 63.74 € *Prezzo unitario in configurazione base | 64.15 € *Prezzo unitario in configurazione base | 171.61 € *Prezzo unitario in configurazione base | 171.61 € *Prezzo unitario in configurazione base | 65.65 € *Prezzo unitario in configurazione base |
| Consegna da | 13 giorni | 13 giorni | Stesso giorno | Stesso giorno | 26 giorni | 5 giorni | 5 giorni | Stesso giorno | 5 giorni | 5 giorni | 5 giorni | Stesso giorno | Stesso giorno | Stesso giorno | 26 giorni | Stesso giorno | 26 giorni | Stesso giorno | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | Stesso giorno | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 7 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni |
| Tipo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo |
| Materiale corpo principale | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PFA | PTFE | PTFE | PTFE | PTFE | PTFE | PTFE | PFA | PFA | PFA | PFA | PFA | PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE / PFA | PTFE | PTFE | PFA |
| Tipo di collegamento | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. uguale | Filettatura <-> Tubo | Filettatura <-> Tubo | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. diverso | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Raccordo tubo <=> tubo con diam. uguale / Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. uguale / Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. uguale / Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. uguale / Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. uguale / Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. uguale |
| Raccordo filettatura-tubo | Gomito con filettatura maschio | Filettatura dritta (portagomma) | Gomito con filettatura maschio | Gomito con filettatura maschio | Dritto con filettatura maschio | - | - | Dritto con filettatura maschio | Gomito con filettatura maschio | - | - | Dritto con filettatura maschio | Dritto con filettatura maschio | Maschiato, dritto | Maschiato, dritto | Gomito femmina | Gomito femmina | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Raccordo multipunto filettatura-tubo | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filettatura maschio, raccordi a T femmina/maschio con diramazione femmina | Filettatura maschio, raccordi a T femmina/maschio con diramazione femmina | Filettatura femmina, raccordi a T femmina/maschio con diramazione femmina | Filettatura femmina, raccordi a T femmina/maschio con diramazione femmina | Filettatura maschio, raccordi a T | Filettatura maschio, raccordi a T | Filettatura femmina, diramazione a T | Filettatura femmina, diramazione a T | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Raccordo tubo-tubo con diam. uguale | - | - | - | - | - | Giunto dritto | Raccordi a T | - | - | Giunti a gomito | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Giunti a gomito | Giunti a gomito | Raccordi a T | Raccordi a T | Giunto montaggio a pannello | Giunto montaggio a pannello | - | - | - | - | - | - | - | - | - | Giunti a gomito | Giunti a gomito | - | - | Raccordi a T |
| Raccordo tubo-tubo con diam. diverso | - | - | - | - | - | - | - | - | - | - | Giunto riduttore | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Giunto riduttore a gomito | - | Giunti riduttori a T | Giunti riduttori a T | Giunto riduttore | Giunto riduttore | - | - | Giunto riduttore a gomito | Giunto riduttore a gomito | Giunti riduttori a T | Giunti riduttori a T | Giunto riduttore | Giunto riduttore | Giunto riduttore | - | - | Giunto riduttore a gomito | Giunto riduttore a gomito | - |
| Raccordo tubo/sporgenza tubo | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tipo di componente correlato | Dado | Dado | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Diam. esterno tubo applicabile (mm) D (D1) | 6 ～ 25 | 6 ～ 25 | 3 ～ 25 | - | 3 ～ 25 | 4 ～ 10 | 4 ～ 10 | 4 ～ 10 | 4 ～ 10 | 4 ～ 10 | 6 ～ 12 | 3 ～ 25 | - | 3 ～ 25 | - | 3 ～ 25 | - | 3 ～ 19 | - | 4 ～ 25 | - | 3 ～ 25 | - | 4 ～ 25 | - | 3 ～ 25 | - | 3 ～ 25 | - | 3 ～ 25 | - | 10 ～ 25 | - | 12 ～ 25 | - | 6 ～ 25 | - | 12 ～ 19 | 10 ～ 25 | - | 6 ～ 25 | - | 6 ～ 12 | - | 6 ～ 19 |
| D.E. tubo applicabile (mm) D2 | 4 ～ 22 | 4 ～ 22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 ～ 10 | - | 4 | - | 4 ～ 6 | - | - | - | 4 ～ 19 | - | 4 ～ 19 | - | 4 ～ 10 | 4 | - | - | 4 ～ 12 | - | 6 ～ 19 | - | 6 ～ 10 | 3 ～ 12 | - | - | - | - | - | - |
| D.E. tubo applicabile (mm) D3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 25 | - | - | - | - | - | - | - | - | - |
| D.E. tubo applicabile (pollici) D (D1) | 1/2 ～ 3/8 | 1/2 ～ 1/4 | - | 1 ～ 3/8 | - | - | - | - | - | - | - | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1/2 ～ 3/8 | - | 1/2 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | 1 ～ 3/8 | - | - | 1 ～ 3/4 | - | 1 ～ 3/8 | - | 1/4 | - |
| D.E. tubo applicabile (pollici) D2 | 1/4 ～ 5/8 | 3/8 ～ 5/32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/4 | - | 1/4 | 1/2 ～ 3/8 | 1/4 | 1/4 ～ 3/4 | - | - | - | 1/2 ～ 3/8 | - | 1/2 ～ 3/8 | - | - | 1/2 ～ 3/8 | - | - | - | - | - |
| D.E. tubo applicabile (pollici) D3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 3/8 | - | - | - | - | - | - | - | - |
| D.I. tubo applicabile(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Con vite di collegamento M (M1) | R / NPT (maschio) | R / NPT (maschio) | R / NPT (maschio) | R / NPT (maschio) | R / NPT (maschio) | - | - | R | R | - | - | R / NPT (maschio) | R / NPT (maschio) | Rc / NPT (maschiato) | Rc / NPT (maschiato) | Rc / NPT (maschiato) | Rc / NPT (maschiato) | R / NPT (maschio) | R / NPT (maschio) | Rc / NPT (maschiato) | Rc / NPT (maschiato) | R / NPT (maschio) | R / NPT (maschio) | Rc / NPT (maschiato) | Rc / NPT (maschiato) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Misura nominale vite di collegamento M (M1) | 1B ～ 3/8B | 1/2B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | - | - | 1/2B ～ 3/8B | 1/2B ～ 3/8B | - | - | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/4B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1B ～ 3/8B | 1/2B ～ 3/8B | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. temperatura d'esercizio(°C) | 200 | 200 | 200 | 200 | 150 ～ 200 | - | - | - | - | - | - | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
Loading...
Seleziona per:
Stock
-
- Indicare solo prodotti a magazzino
-
Tipo
- Corpo principale raccordo
- Componenti correlati
-
Materiale corpo principale
- PTFE
- PFA
-
Tipo di collegamento
- Filettatura <-> Tubo
- Filettatura <-> Tubo, diramazione
- Sporgenza tubo <=> tubo
- Raccordo tubo <=> tubo con diam. uguale
- Raccordo tubo <=> tubo con diam. diverso
- Altro
-
Raccordo filettatura-tubo
- Dritto con filettatura maschio
- Maschiato, dritto
- Gomito con filettatura maschio
- Gomito femmina
- Filettatura dritta (portagomma)
-
Raccordo multipunto filettatura-tubo
- Filettatura maschio, raccordi a T femmina/maschio con diramazione femmina
- Filettatura femmina, raccordi a T femmina/maschio con diramazione femmina
- Filettatura maschio, raccordi a T
- Filettatura femmina, diramazione a T
-
Raccordo tubo-tubo con diam. uguale
- Giunto dritto
- Giunti a gomito
- Raccordi a T
- Giunto montaggio a pannello
- A croce
-
Raccordo tubo-tubo con diam. diverso
- Giunto riduttore
- Giunto riduttore a gomito
- Giunti riduttori a T
-
Raccordo tubo/sporgenza tubo
- Parte sporgente tubo, giunti a gomito
- Parte sporgente tubo, giunti a T
-
Tipo di componente correlato
- Dado
- Manicotto
- Altro
-
Diam. esterno tubo applicabile (mm) D (D1)
-
D.E. tubo applicabile (mm) D2
-
D.E. tubo applicabile (mm) D3
-
D.E. tubo applicabile (pollici) D (D1)
-
D.E. tubo applicabile (pollici) D2
-
D.E. tubo applicabile (pollici) D3
-
D.I. tubo applicabile(mm)
-
Con vite di collegamento M (M1)
-
Misura nominale vite di collegamento M (M1)
-
Max. temperatura d'esercizio(°C)
Produttore
Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Raccordi in fluororesina
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.