Raccordi in fluororesina（D.E. tubo applicabile (pollici) D (D1)：1/2）
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
Raccordo Pillar super 300, gomito maschio
PILLAR
The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
◆ Reduction in tightening torque by updated sealing mechanism
Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
◆ Greatly enhanced workability due to simplified tightening control
The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
◆ Excellent sealing performance
Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
◆ Radical reduction in micro-bubble and liquid accumulation
Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
◆ high working pressure/temperature
The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.Configura oraA partire da∗ ： 97.09 € Consegna da ： 13 giorni *Prezzo unitario in configurazione base
-
Raccordo Pillar super 300, connettore maschio
PILLAR
The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
◆ Reduction in tightening torque by updated sealing mechanism
Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
◆ Greatly enhanced workability due to simplified tightening control
The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
◆ Excellent sealing performance
Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
◆ Radical reduction in micro-bubble and liquid accumulation
Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
◆ high working pressure/temperature
The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.Configura oraA partire da∗ ： 69.93 € Consegna da ： 13 giorni *Prezzo unitario in configurazione base
-
- In Offerta
LQ1L, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Modello gomito
SMC
A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube size can be changed.
· Easy nut fastening.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 29.15 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, filettatura maschio, dimensioni in pollici
SMC
A fluoropolymer male connector fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 30.21 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, filettatura femmina, dimensioni in pollici
SMC
A fluoropolymer female connector fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 45.29 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, gomito con filettatura femmina, misura in pollici
SMC
A fluoropolymer female elbow fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 50.02 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, raccordo a T con filettatura maschio, dimensioni in pollici
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· Strong resistance to tube bending and deformation.
· Easy nut fastening
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 62.82 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Female Run Tee LQ1R-F Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A fluoropolymer female run tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 311.73 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, raccordo a T con filettatura maschio, dimensioni in pollici
SMC
A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube size can be changed.
· Easy nut fastening.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 62.82 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Female Branch Tee LQ1B-F Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A fluoropolymer female branch tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 76.60 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
- In Offerta
LQ1E, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a gomito
SMC
A union elbow with outstanding flow-through characteristics with minimized liquid pooling.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 50.77 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
LQ1T, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a T
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· Shows strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· For use at 200°C. The trapezoidal thread prevents the angled insertion of nuts.
· The reducer system allows you to switch tube sizes without having to change the body itself.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 68.81 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Raccordi in fluoroplastica / Raccordi per guaine in fluoropolimero, serie LQ1, Raccordo per montaggio a pannello, dimensioni in pollici
SMC
A fluoropolymer panel mount union fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 38.31 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Union Flange LQ1F Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A fluoropolymer fitting with a trapezoidal thread that allows for the application of high levels of torque.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 176.40 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, raccordo con riduttore, dimensioni in pollici
SMC
A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
[Features]
· The quadruple-sealing construction provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· Strong resistance to tube bending and deformation.
· Easy nut fastening
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 50.73 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, raccordo a T, misura in pollici
SMC
A reducing type fluoropolymer union tee fitting for use at temperatures of 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 115.97 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, raccordo riduttore, misura in pollici
SMC
A reducing-type fluoropolymer union fitting for use at temperatures of up to 200°C.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· The seal lock on the nut helps prevent loosening.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation.
· Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 71.29 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, Gomito salvaspazio con dado per raccordo, misura in pollici
SMC
The LQ1E-SS-R is a reducing-type space-saving fluoropolymer elbow fitting from SMC.
[Features]
· Unique quadruple-sealing construction (PAT.) provides excellent sealing performance.
· High leakage-prevention reliability.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 82.98 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, Tee salvaspazio, misura in pollici
SMC
The LQ1T-ST Inch Size is a space saving fluoropolymer union tee fitting from SMC.
[Features]
· Quadruple-seal construction.
· Flow-through characteristics.
· For use at 200°C.
· Prevents loosening.
· A design with strong resistance to tube bending and deformation.
· Easy nut fastening.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 93.35 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ1, Tee riduttore salvaspazio, misura in pollici
SMC
A fluoropolymer union tee fitting by SMC.
[Features]
· Inch size.
· The tube can be positioned freely.
· Quadruple-seal construction.
· Offers outstanding flow-through characteristics.
· For use at 200°C.
· Excellent at preventing loosening.
· Strong resistance to tube bending and deformation.
· Easy nut fastening.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 155.58 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Tubing Extension Union Elbow LQ1E-T Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A fluoropolymer union elbow fitting with excellent anti-liquid leakage performance.
[Features]
· Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· Strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.Configura oraA partire da∗ ： 67.52 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, raccordo a T con prolunga del tubo, misura in pollici
SMC
Tubing extension union tee with excellent anti-liquid leakage performance.
[Features]
· Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
· Offers outstanding flow-through characteristics with minimized liquid pooling.
· For use at 200°C.
· The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube support allows it to withstand use with lateral loads.
· Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 90.13 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ1, prolunga del tubo, riduttore, misura in pollici
SMC
A fluoropolymer fitting boasting outstanding flow-through characteristics with minimized liquid pooling.
[Features]
· SMC's unique quadruple sealing construction provides highly reliable performance against the leakage of liquids.
· For use at 200°C.
· The trapezoidal thread allows for the application of high levels of torque.
· The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
· The tube support allows it to withstand use with lateral loads.
· Simply screw in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
· The trapezoidal thread prevents the angled insertion of nuts.
· The reducer system allows you to switch tube sizes without having to change the body itself.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 186.68 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ3, filettatura femmina, dimensioni in pollici
SMC
An inch size female connector.
[Features]
· A fluoropolymer fitting.
· A flared collet structure.
· Triple-seal construction.
· Excellent assemblability.
· Excellent flow-through characteristics.
· Able to withstand thermal stress.
· For use at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 36.19 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Male Elbow LQ3L-M Inch Size Fluoropolymer Fittings / Hyper Fittings
SMC
A male elbow fluoropolymer fitting that can withstand thermal stress.
[Features]
· A flared collet structure.
· Triple-seal construction.
· Excellent assemblability.
· Excellent flow-through characteristics.
· Able to withstand thermal stress.
· For use at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 28.69 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ3, gomito con filettatura femmina, misura in pollici
SMC
Inch size female elbow.
[Features]
· Fluoropolymer fitting.
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 51.85 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Male Branch Tee LQ3B-M Inch Size Fluoropolymer Fittings Hyper Fittings
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 50.65 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Male Branch Tee LQ3B-F Inch Size Fluoropolymer Fittings Hyper Fittings
SMC
Heat-stress resistant fluoropolymer pipe fitting.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 63.00 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Male Run Tee LQ3R-M Inch Size Fluoropolymer Fittings Hyper Fittings
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 52.29 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Female Run Tee LQ3R-F Inch Size Fluoropolymer Fittings Hyper Fittings
SMC
A fluoropolymer fitting with excellent flow-through characteristics thanks to its flare-type collet construction.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 69.08 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Union Tee LQ3T Inch Size Fluoropolymer Fittings Hyper Fittings
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 46.15 € Prezzo speciale Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Union LQ3U Inch Size Fluoropolymer Fittings Hyper Fittings
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 33.56 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ3, raccordo con riduttore, misura in pollici
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 44.84 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordo per tubi in fluoropolimero, serie LQ3, raccordo a T, dimensioni in pollici
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 44.00 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ3, Gomito salvaspazio, misura in pollici
SMC
SMC Corporation's fluoropolymer fitting space-saving union elbow: LQ3E-S inch size.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Excellent heat resistance.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 72.50 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ3, Raccordo a T salvaspazio, misura in pollici
SMC
SMC Corporation's fluoropolymer fitting space-saving branch tee: LQ3T-SB inch size.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Excellent heat resistance.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 100.44 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ3, Tee salvaspazio, dimensioni in pollici
SMC
SMC Corporation's fluoropolymer fitting space-saving run tee: LQ3T-SR inch size.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Excellent heat resistance.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 52.74 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ3, Prolunga per tubi dritti, misura in pollici
SMC
Fluoropolymer fittings with excellent flow-through characteristics.
[Features]
· Material: New PFA.
· Triple-seal construction.
· Ease of installation.
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent heat resistance.
· Can be used at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 30.16 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordi in fluoroplastica / Raccordi per tubi in fluoropolimero, serie LQ3, Adattatore diritto, dimensioni in pollici
SMC
Fluoropolymer fitting inch size straight adapter.
[Features]
· Material: New PFA.
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 33.11 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Union Flange LQ3F Inch Size Fluoropolymer Fittings Hyper Fittings
SMC
Fluoropolymer fittings from SMC Corporation.
[Features]
· Flare-type collet construction.
· Triple-seal construction.
· Ease of installation.
· Excellent flow-through characteristics.
· Excellent heat resistance.
· Can be used at 200°C.
[Applications]
· For joining tubes during piping assembly.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 59.52 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
LVN, Valvola a spillo in resina fluoridica di gran purezza
SMC
A fluoropolymer fitting with an integrated fitting construction.
[Features]
· Fluid adjustment range: 0 to 12 l/min.
· Integrated fitting construction: Hyper fitting, LQ2 series is used.
· Triple-seal construction.
· Nut locking mechanism.
· High flexural strength.
· Different tubing sizes can be selected.
· Material: New PFA.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 287.27 € Consegna da ： 39 giorni *Prezzo unitario in configurazione base
-
Fluoropolymer Bore Through Connector LQHB Inch Size
SMC
A fluoropolymer fitting tubes pass through the fitting body, enabling it to be set in any position.
[Features]
· Can be used in pressure feed of chemical liquids, etc., during the production process of semiconductors.
· Can be used with chemical liquids such as acid, alkali and deionized water.- Dati CAD disponibili in formato 2D / 3D
Configura oraA partire da∗ ： 22.84 € Consegna da ： 26 giorni *Prezzo unitario in configurazione base
-
Raccordo in fluororesina F-UEA, adattatore giunto a gomito
NIHON PISCO
Raggiunge un'elevata forza di estrazione e notevoli prestazioni di tenuta. Un anello resistente agli urti mantiene fermo il tubo.Configura oraA partire da∗ ： 67.68 € Consegna da ： 12 giorni *Prezzo unitario in configurazione base
-
Raccordo in fluororesina F-MBT con diramazione a T
NIHON PISCO
Raggiunge un'elevata forza di estrazione e notevoli prestazioni di tenuta. Un anello resistente agli urti mantiene fermo il tubo.Configura oraA partire da∗ ： 74.87 € Consegna da ： 12 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da |
| Tipo |
| Materiale corpo principale |
| Tipo di collegamento |
| Raccordo filettatura-tubo |
| Raccordo multipunto filettatura-tubo |
| Raccordo tubo-tubo con diam. uguale |
| Raccordo tubo-tubo con diam. diverso |
| Raccordo tubo/sporgenza tubo |
| Tipo di componente correlato |
| Diam. esterno tubo applicabile (mm) D (D1) |
| D.E. tubo applicabile (mm) D2 |
| D.E. tubo applicabile (mm) D3 |
| D.E. tubo applicabile (pollici) D (D1) |
| D.E. tubo applicabile (pollici) D2 |
| D.E. tubo applicabile (pollici) D3 |
| D.I. tubo applicabile(mm) |
| Con vite di collegamento M (M1) |
| Misura nominale vite di collegamento M (M1) |
| Max. temperatura d'esercizio(°C) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | PILLAR | PILLAR | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | NIHON PISCO | NIHON PISCO |
| Serie prodotto | LQ1L, raccordo in resina fluoropolimerica gran purezza, collegamento filettato - Modello gomito | Female Run Tee LQ1R-F Inch Size Fluoropolymer Fittings / Hyper Fittings | Female Branch Tee LQ1B-F Inch Size Fluoropolymer Fittings / Hyper Fittings | LQ1E, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a gomito | LQ1T, raccordo in resina fluoropolimerica gran purezza, collegamento a tubo, intermedio a T | Union Flange LQ1F Inch Size Fluoropolymer Fittings / Hyper Fittings | Tubing Extension Union Elbow LQ1E-T Inch Size Fluoropolymer Fittings / Hyper Fittings | Male Elbow LQ3L-M Inch Size Fluoropolymer Fittings / Hyper Fittings | Male Branch Tee LQ3B-M Inch Size Fluoropolymer Fittings Hyper Fittings | Male Branch Tee LQ3B-F Inch Size Fluoropolymer Fittings Hyper Fittings | Male Run Tee LQ3R-M Inch Size Fluoropolymer Fittings Hyper Fittings | Female Run Tee LQ3R-F Inch Size Fluoropolymer Fittings Hyper Fittings | Union Tee LQ3T Inch Size Fluoropolymer Fittings Hyper Fittings | Union Flange LQ3F Inch Size Fluoropolymer Fittings Hyper Fittings | ||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
| A partire da∗ | 97.09 € *Prezzo unitario in configurazione base | 69.93 € *Prezzo unitario in configurazione base | 29.15 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 30.21 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 45.29 € *Prezzo unitario in configurazione base | 50.02 € *Prezzo unitario in configurazione base | 62.82 € *Prezzo unitario in configurazione base | 311.73 € *Prezzo unitario in configurazione base | 62.82 € *Prezzo unitario in configurazione base | 76.60 € *Prezzo unitario in configurazione base | 50.77 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 68.81 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 38.31 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 176.40 € *Prezzo unitario in configurazione base | 50.73 € *Prezzo unitario in configurazione base | 115.97 € *Prezzo unitario in configurazione base | 71.29 € *Prezzo unitario in configurazione base | 82.98 € *Prezzo unitario in configurazione base | 93.35 € *Prezzo unitario in configurazione base | 155.58 € *Prezzo unitario in configurazione base | 67.52 € *Prezzo unitario in configurazione base | 90.13 € *Prezzo unitario in configurazione base | 186.68 € *Prezzo unitario in configurazione base | 36.19 € *Prezzo unitario in configurazione base | 28.69 € *Prezzo unitario in configurazione base | 51.85 € *Prezzo unitario in configurazione base | 50.65 € *Prezzo unitario in configurazione base | 63.00 € *Prezzo unitario in configurazione base | 52.29 € *Prezzo unitario in configurazione base | 69.08 € *Prezzo unitario in configurazione base | 46.15 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 33.56 € Prezzo speciale *Prezzo unitario in configurazione base In Offerta | 44.84 € *Prezzo unitario in configurazione base | 44.00 € *Prezzo unitario in configurazione base | 72.50 € *Prezzo unitario in configurazione base | 100.44 € *Prezzo unitario in configurazione base | 52.74 € *Prezzo unitario in configurazione base | 30.16 € *Prezzo unitario in configurazione base | 33.11 € *Prezzo unitario in configurazione base | 59.52 € *Prezzo unitario in configurazione base | 287.27 € *Prezzo unitario in configurazione base | 22.84 € *Prezzo unitario in configurazione base | 67.68 € *Prezzo unitario in configurazione base | 74.87 € *Prezzo unitario in configurazione base |
| Consegna da | 13 giorni | 13 giorni | Stesso giorno | Stesso giorno | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | Stesso giorno | Stesso giorno | Stesso giorno | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | Stesso giorno | 7 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 26 giorni | 39 giorni | 26 giorni | 12 giorni | 12 giorni |
| Tipo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Corpo principale raccordo | Componenti correlati | Componenti correlati | Corpo principale raccordo | Corpo principale raccordo |
| Materiale corpo principale | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PTFE | PFA | PTFE / PFA | PFA | PFA | PFA | PFA | PTFE / PFA | PTFE / PFA | PFA | PFA | PFA | PTFE / PFA | PFA | PFA | PTFE | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | PFA | - | PFA | PFA |
| Tipo di collegamento | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. uguale / Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. diverso | Sporgenza tubo <=> tubo | Sporgenza tubo <=> tubo | Sporgenza tubo <=> tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Filettatura <-> Tubo, diramazione | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. diverso | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. uguale | Raccordo tubo <=> tubo con diam. uguale | Sporgenza tubo <=> tubo | Altro | Raccordo tubo <=> tubo con diam. uguale | - | Altro | Altro | Filettatura <-> Tubo |
| Raccordo filettatura-tubo | Gomito con filettatura maschio | Filettatura dritta (portagomma) | Gomito con filettatura maschio | Dritto con filettatura maschio | Maschiato, dritto | Gomito femmina | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Maschiato, dritto | Gomito con filettatura maschio | Gomito femmina | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Raccordo multipunto filettatura-tubo | - | - | - | - | - | - | Filettatura maschio, raccordi a T femmina/maschio con diramazione femmina | Filettatura femmina, raccordi a T femmina/maschio con diramazione femmina | Filettatura maschio, raccordi a T | Filettatura femmina, diramazione a T | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filettatura maschio, raccordi a T | Filettatura femmina, diramazione a T | Filettatura maschio, raccordi a T femmina/maschio con diramazione femmina | Filettatura femmina, raccordi a T femmina/maschio con diramazione femmina | - | - | - | - | - | - | - | - | - | - | - | - | - | Filettatura maschio, raccordi a T |
| Raccordo tubo-tubo con diam. uguale | - | - | - | - | - | - | - | - | - | - | Giunti a gomito | Raccordi a T | Giunto montaggio a pannello | - | - | - | - | Giunti a gomito | Raccordi a T | - | - | - | - | - | - | - | - | - | - | - | Raccordi a T | A croce | - | - | Giunti a gomito | Raccordi a T | Raccordi a T | - | - | A croce | - | - | - | - |
| Raccordo tubo-tubo con diam. diverso | - | - | - | - | - | - | - | - | - | - | - | Giunti riduttori a T | - | - | Giunto riduttore a gomito | Giunti riduttori a T | Giunto riduttore | - | - | Giunti riduttori a T | - | - | - | - | - | - | - | - | - | - | - | - | Giunto riduttore a gomito | Giunti riduttori a T | - | - | - | - | - | - | - | - | - | - |
| Raccordo tubo/sporgenza tubo | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Parte sporgente tubo, giunti a gomito | Parte sporgente tubo, giunti a T | Parte sporgente tubo, giunti a gomito | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Parte sporgente tubo, giunti a T | - | - | - | - | - | - |
| Tipo di componente correlato | Dado | Dado | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Altro | - | Altro | Altro | - | - |
| Diam. esterno tubo applicabile (mm) D (D1) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 12.7 | 12.7 |
| D.E. tubo applicabile (mm) D2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 ～ 12 | - | - | - |
| D.E. tubo applicabile (mm) D3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. tubo applicabile (pollici) D (D1) | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
| D.E. tubo applicabile (pollici) D2 | 3/8 | 3/8 | - | - | - | - | - | - | - | - | - | 3/4 ～ 3/8 | - | - | 1/4 ～ 1/8 | 1/2 ～ 3/8 | 1/4 ～ 1/8 | - | - | - | - | - | 3/4 ～ 3/8 | - | - | - | - | - | - | - | - | - | 1/4 ～ 3/8 | 1/2 ～ 3/8 | - | - | - | - | - | - | 3/8 | - | - | - |
| D.E. tubo applicabile (pollici) D3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 3/4 | - | - | - | 1/2 ～ 3/4 | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2 ～ 3/8 | - | - | - | - | - | - | - | - | - | - |
| D.I. tubo applicabile(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 9.53 | 9.53 |
| Con vite di collegamento M (M1) | NPT (maschio) | NPT (maschio) | R / NPT (maschio) | R / NPT (maschio) | Rc / NPT (maschiato) | Rc / NPT (maschiato) | R / NPT (maschio) | Rc / NPT (maschiato) | R / NPT (maschio) | Rc / NPT (maschiato) | - | - | - | - | - | - | - | - | - | - | - | - | - | Rc / NPT (maschiato) | R / NPT (maschio) | Rc / NPT (maschiato) | R / NPT (maschio) | Rc / NPT (maschiato) | R / NPT (maschio) | NPT (maschiato) | - | - | - | - | - | - | - | - | - | - | - | R / NPT (maschio) | - | NPT (maschio) |
| Misura nominale vite di collegamento M (M1) | 1/2B | 1/2B | 1B ～ 3/8B | 1B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/4B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | 1/2B ～ 3/8B | - | - | - | - | - | - | - | - | - | - | - | 1/2B | - | 1/2B ～ 3/8B |
| Max. temperatura d'esercizio(°C) | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 150 ～ 200 | 150 ～ 200 | 150 ～ 200 | 150 ～ 200 | 200 | 150 ～ 200 | 200 | 150 ～ 200 | 150 ～ 200 | 150 ～ 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | - | 200 | 200 | 200 |
Loading...
Seleziona per:
Stock
-
- Indicare solo prodotti a magazzino
-
Tipo
- Corpo principale raccordo
- Componenti correlati
-
Materiale corpo principale
- PTFE
- PFA
-
Tipo di collegamento
- Filettatura <-> Tubo
- Filettatura <-> Tubo, diramazione
- Sporgenza tubo <=> tubo
- Raccordo tubo <=> tubo con diam. uguale
- Raccordo tubo <=> tubo con diam. diverso
- Altro
-
Raccordo filettatura-tubo
- Dritto con filettatura maschio
- Maschiato, dritto
- Gomito con filettatura maschio
- Gomito femmina
- Filettatura dritta (portagomma)
-
Raccordo multipunto filettatura-tubo
- Filettatura maschio, raccordi a T femmina/maschio con diramazione femmina
- Filettatura femmina, raccordi a T femmina/maschio con diramazione femmina
- Filettatura maschio, raccordi a T
- Filettatura femmina, diramazione a T
-
Raccordo tubo-tubo con diam. uguale
- Giunto dritto
- Giunti a gomito
- Raccordi a T
- Giunto montaggio a pannello
- A croce
-
Raccordo tubo-tubo con diam. diverso
- Giunto riduttore
- Giunto riduttore a gomito
- Giunti riduttori a T
-
Raccordo tubo/sporgenza tubo
- Parte sporgente tubo, giunti a gomito
- Parte sporgente tubo, giunti a T
-
Tipo di componente correlato
- Dado
- Manicotto
- Altro
-
Diam. esterno tubo applicabile (mm) D (D1)
-
D.E. tubo applicabile (mm) D2
-
D.E. tubo applicabile (mm) D3
-
D.E. tubo applicabile (pollici) D (D1)
-
D.E. tubo applicabile (pollici) D2
-
D.E. tubo applicabile (pollici) D3
-
D.I. tubo applicabile(mm)
-
Con vite di collegamento M (M1)
-
Misura nominale vite di collegamento M (M1)
-
Max. temperatura d'esercizio(°C)
Produttore
Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Raccordi in fluororesina
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.