Raccordi per tubi in acciaio inox（pagina 2）

?* Informazioni su tempi di consegna

• 

  Raccordo per uso in alta pressione in acciaio inossidabile - Riduttore

  KITZ

  • Sconto volumi elevati

  A partire da∗ ：	21.48 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Raccordo in acciaio inossidabile per uso ad alta pressione - Unione a riduzione

  KITZ

  • Sconto volumi elevati

  A partire da∗ ：	48.16 €
  Consegna da ：	Preventivo

  *Prezzo unitario in configurazione base

• 

  Giunto ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (a gomito)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	14.28 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico per tubo in acciaio inossidabile con curva a gomito a 45°

  HITACHI KINZOKU

  A mechanical tube fitting developed for stainless steel pipes. Highly reliable, it takes advantage of stainless steel's strength and light weight to provide superb corrosion and heat resistance.

  CAD ：

  2D

  A partire da∗ ：	13.83 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Accoppiamenti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (Curva a gomito a 45°)

  HITACHI KINZOKU

  Construction can be completed without the need for tools by inserting the pipe into the coupling. Due to the lip shape of the gasket, appropriate internal pressure is applied to the gasket and stable sealing performance can be achieved.
  
  [Features]
  · SUSDAKE is developed using lightweight but strong stainless steel and has excellent corrosion and heat resistance. The one-touch joint that can be used to connect stainless steel pipes for general piping.
  · No tools necessary – the pipe is installed by simple insertion into the fitting. (Use for processing of mechanical fittings and no special tools are required for deforming the tube.)
  · Due to the lip shape of the packing, there is an appropriate amount of internal pressure on the packing, providing a stable seal.
  · A fluorine rubber is used for packing which meets leaching standards while used as a water supply material, and has excellent durability, heat resistance, and chlorine resistance.
  · In case of inadequate inspection following insertion of the tube, leakage can be detected by pressure-proof inspection method.
  · Wrapping the leakage detection sleeve to the tip of the tube reduces damage to the packing.

  A partire da∗ ：	18.20 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (Attacco femmina)

  HITACHI KINZOKU

  Construction can be completed without the need for tools by inserting the pipe into the coupling. Due to the lip shape of the gasket, appropriate internal pressure is applied to the gasket and stable sealing performance can be achieved.

  A partire da∗ ：	14.68 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (a T)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	26.02 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (Adattatore maschio)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	14.52 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido SUSDAKE per tubazioni acciaio inox (gomito filettato maschio)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	25.94 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (Ad uso idraulico a gomito)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	18.12 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (Ad uso idraulico a T)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	27.70 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (Modello montato lateralmente ad uso idraulico a gomito con sede)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	26.50 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (Ad uso idraulico attacco femmina con sede)

  HITACHI KINZOKU

  [Features]
  · Construction can be completed without the need for tools by simply inserting the pipe into the fitting.
  · Due to the lip shape of the packing, appropriate internal pressure is applied to the packing and stable sealing performance can be achieved.

  A partire da∗ ：	24.66 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (Tappo)

  HITACHI KINZOKU

  Construction can be completed without the need for tools by inserting the pipe into the coupling. Due to the lip shape of the gasket, appropriate internal pressure is applied to the gasket and stable sealing performance can be achieved.

  A partire da∗ ：	9.57 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (adattatore con flangia)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	44.15 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico a gomito per tubatura in acciaio inossidabile

  HITACHI KINZOKU

  A mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
  · The packing has stable long term sealing properties due to its structure in which the appropriate pressure is applied to the surface.
  · The packing is made using a fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a stronger connecting force is achieved via the "wedge effect".
  · The packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be done unless the pipe ends are expanded, the pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · If you have forgotten to perform the final tightening, liquids will leak from fittings during pressure tests, informing you that further tightening is required.
  · Expanded pipes can be easily corrected after setting using the automatic device.
  · The pipe can easily be supported and secured in place as the connecting part between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	10.60 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico con tappo per tubatura in acciaio inossidabile

  HITACHI KINZOKU

  Mechanical type tube fitting developed for stainless steel pipes. Highly reliable fitting with superb corrosion resistance and heat resistance, which leverages the special characteristics of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · Highly reliable fitting benefits from the lightweight and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
  · Packing features stable long-term sealing properties due to a structure which includes appropriate pressure applied to the surface.
  · A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device is used in the packing.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved via the so-called wedge effect.
  · Packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be performed unless pipe ends are expanded, pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · When final tightening is neglected, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
  · Expanded pipes can be corrected easily using an automated device after pipe setting.
  · Pipes can easily be held and secured as the connector between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	6.98 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico con incavo per Tubature in acciaio inossidabile

  HITACHI KINZOKU

  Mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion resistance and heat resistance, which optimizes the special characteristics of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · Highly reliable fitting benefits from the light and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
  · The packing has stable long-term sealing properties due to a structure with appropriate pressure applied to the surface.
  · A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when used as a water supply device is used in the packing.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved by the so-called wedge effect.
  · The packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be done unless pipe ends are expanded, pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · When final tightening is forgotten, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
  · Expanded pipes can be corrected easily using an automatic machine after pipe setting.
  · The pipe can easily be held and secured because the connector between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	11.30 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico a T per tubo in acciaio inossidabile

  HITACHI KINZOKU

  Mechanical type tube fitting developed for stainless steel pipes. Highly reliable fitting with superb corrosion resistance and heat resistance, which leverages the special characteristics of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · Highly reliable fitting benefits from the lightweight and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
  · Packing features stable long-term sealing properties due to a structure which includes appropriate pressure applied to the surface.
  · A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device is used in the packing.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved via the so-called wedge effect.
  · Packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be performed unless pipe ends are expanded, pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · When final tightening is neglected, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
  · Expanded pipes can be corrected easily using an automated device after pipe setting.
  · Pipes can easily be held and secured as the connector between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	19.49 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Tubo corto con dado per giunti meccanici per tubazioni acciaio inox

  HITACHI KINZOKU

  A mechanical type tube fitting that has been developed for stainless steel pipes. A highly reliable fitting with superb corrosion and heat resistance that utilizes the full properties of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · This highly reliable fitting benefits from the lightweight and strong properties of stainless steel pipes with superior corrosion and heat resistance properties.
  · The packing seal has stable sealing properties over the long term due to its structure applying the appropriate pressure to the surface.
  · A fluororubber is used in the packing material. The fluororubber packing has superior durability, heat resistance, and resistance to aqueous chlorine, which satisfies leaching standards when it is used in water supply systems.
  · The connector between the pipe and the fitting has a tapered surface that is tightened using a nut. Therefore, a strong connecting force is achieved by the so-called wedge effect.
  · The packing does not have to be removed from the fitting when installing the piping.
  · In addition, because the pipe ends must be expanded in order to complete the piping, this also prevents the pipes from falling out.
  · Loose piping can be easily checked using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · If the final tightening has been forgotten, water will leak from fittings during water pressure tests, which enables any loose pipes to be detected.
  · Expanded pipes can be simply corrected using an automatic machine after the pipes have been set.
  · The connection between the pipe and the fitting is not prone to shaking. Therefore, the pipes can easily be held and secured.

  CAD ：

  2D

  A partire da∗ ：	10.77 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Gomito filettato maschio per giunti meccanici per tubazioni acciaio inox

  HITACHI KINZOKU

  Mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion resistance and heat resistance, which optimizes the special characteristics of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · Highly reliable fitting benefits from the light and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
  · The packing has stable long-term sealing properties due to a structure with appropriate pressure applied to the surface.
  · A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when used as a water supply device is used in the packing.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved by the so-called wedge effect.
  · The packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be done unless pipe ends are expanded, pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · When final tightening is forgotten, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
  · Expanded pipes can be corrected easily using an automatic machine after pipe setting.
  · The pipe can easily be held and secured because the connector between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	18.76 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico con boccola per tubazione in acciaio inossidabile

  HITACHI KINZOKU

  Mechanical type tube fitting developed for stainless steel pipes. Highly reliable fitting with superb corrosion resistance and heat resistance, which leverages the special characteristics of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · Highly reliable fitting benefits from the lightweight and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
  · Packing features stable long-term sealing properties due to a structure which includes appropriate pressure applied to the surface.
  · A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device is used in the packing.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved via the so-called wedge effect.
  · Packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be performed unless pipe ends are expanded, pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · When final tightening is neglected, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
  · Expanded pipes can be corrected easily using an automated device after pipe setting.
  · Pipes can easily be held and secured as the connector between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	17.78 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico per tubatura in acciaio inossidabile ad iuso idraulico gomito con sede

  HITACHI KINZOKU

  A mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
  · The packing has stable long term sealing properties due to its structure in which the appropriate pressure is applied to the surface.
  · The packing is made using a fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a stronger connecting force is achieved via the "wedge effect".
  · The packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be done unless the pipe ends are expanded, the pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · If you have forgotten to perform the final tightening, liquids will leak from fittings during pressure tests, informing you that further tightening is required.
  · Expanded pipes can be easily corrected after setting using the automatic device.
  · The pipe can easily be supported and secured in place as the connecting part between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	19.89 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico idrante con incavo per sede per tubatura in acciaio inossidabile

  HITACHI KINZOKU

  A mechanical type tube fitting that has been developed for stainless steel pipes. A highly reliable fitting with superb corrosion and heat resistance that utilizes the full properties of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · This highly reliable fitting benefits from the lightweight and strong properties of stainless steel pipes with superior corrosion and heat resistance properties.
  · The packing seal has stable sealing properties over the long term due to its structure applying the appropriate pressure to the surface.
  · A fluororubber is used in the packing material. The fluororubber packing has superior durability, heat resistance, and resistance to aqueous chlorine, which satisfies leaching standards when it is used in water supply systems.
  · The connector between the pipe and the fitting has a tapered surface that is tightened using a nut. Therefore, a strong connecting force is achieved by the so-called wedge effect.
  · The packing does not have to be removed from the fitting when installing the piping.
  · In addition, because the pipe ends must be expanded in order to complete the piping, this also prevents the pipes from falling out.
  · Loose piping can be easily checked using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · If the final tightening has been forgotten, water will leak from fittings during water pressure tests, which enables any loose pipes to be detected.
  · Expanded pipes can be simply corrected using an automatic machine after the pipes have been set.
  · The connection between the pipe and the fitting is not prone to shaking. Therefore, the pipes can easily be held and secured.

  CAD ：

  2D

  A partire da∗ ：	18.56 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Gomito idrante per giunti meccanici per tubazioni acciaio inox

  HITACHI KINZOKU

  Mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion resistance and heat resistance, which optimizes the special characteristics of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · Highly reliable fitting benefits from the light and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
  · The packing has stable long-term sealing properties due to a structure with appropriate pressure applied to the surface.
  · A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when used as a water supply device is used in the packing.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved by the so-called wedge effect.
  · The packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be done unless pipe ends are expanded, pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · When final tightening is forgotten, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
  · Expanded pipes can be corrected easily using an automatic machine after pipe setting.
  · The pipe can easily be held and secured because the connector between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	13.77 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Presa idrante per giunti meccanici per tubazioni acciaio inox

  HITACHI KINZOKU

  A mechanical type tube fitting that has been developed for stainless steel pipes. A highly reliable fitting with superb corrosion and heat resistance that utilizes the full properties of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · This highly reliable fitting benefits from the lightweight and strong properties of stainless steel pipes with superior corrosion and heat resistance properties.
  · The packing seal has stable sealing properties over the long term due to its structure applying the appropriate pressure to the surface.
  · A fluororubber is used in the packing material. The fluororubber packing has superior durability, heat resistance, and resistance to aqueous chlorine, which satisfies leaching standards when it is used in water supply systems.
  · The connector between the pipe and the fitting has a tapered surface that is tightened using a nut. Therefore, a strong connecting force is achieved by the so-called wedge effect.
  · The packing does not have to be removed from the fitting when installing the piping.
  · In addition, because the pipe ends must be expanded in order to complete the piping, this also prevents the pipes from falling out.
  · Loose piping can be easily checked using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · If the final tightening has been forgotten, water will leak from fittings during water pressure tests, which enables any loose pipes to be detected.
  · Expanded pipes can be simply corrected using an automatic machine after the pipes have been set.
  · The connection between the pipe and the fitting is not prone to shaking. Therefore, the pipes can easily be held and secured.

  CAD ：

  2D

  A partire da∗ ：	13.90 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico idrante a T per tubatura in acciaio inossidabile

  HITACHI KINZOKU

  Mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion resistance and heat resistance, which optimizes the special characteristics of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · Highly reliable fitting benefits from the light and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
  · The packing has stable long-term sealing properties due to a structure with appropriate pressure applied to the surface.
  · A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when used as a water supply device is used in the packing.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved by the so-called wedge effect.
  · The packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be done unless pipe ends are expanded, pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · When final tightening is forgotten, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
  · Expanded pipes can be corrected easily using an automatic machine after pipe setting.
  · The pipe can easily be held and secured because the connector between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	20.75 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico per tubatura in acciaio inossidabile Unione isolata

  HITACHI KINZOKU

  A mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
  · The packing has stable long term sealing properties due to its structure in which the appropriate pressure is applied to the surface.
  · The packing is made using a fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a stronger connecting force is achieved via the "wedge effect".
  · The packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be done unless the pipe ends are expanded, the pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · If you have forgotten to perform the final tightening, liquids will leak from fittings during pressure tests, informing you that further tightening is required.
  · Expanded pipes can be easily corrected after setting using the automatic device.
  · The pipe can easily be supported and secured in place as the connecting part between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	35.26 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Adattatore per giunto meccanico filettatura maschio per tubatura in acciaio inossidabile

  HITACHI KINZOKU

  A mechanical tube fitting developed for stainless steel pipes. Highly reliable, it takes advantage of stainless steel's strength and light weight to provide superb corrosion and heat resistance.

  CAD ：

  2D

  A partire da∗ ：	11.50 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico con adattatore flangia per tubatura in acciaio inossidabile

  HITACHI KINZOKU

  Mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion resistance and heat resistance, which optimizes the special characteristics of lightweight and strong stainless steel piping.
  
  [Features]
  · Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
  · Highly reliable fitting benefits from the light and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
  · The packing has stable long-term sealing properties due to a structure with appropriate pressure applied to the surface.
  · A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when used as a water supply device is used in the packing.
  · Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved by the so-called wedge effect.
  · The packing does not have to be removed from the fitting while laying pipe.
  · Furthermore, because piping cannot be done unless pipe ends are expanded, pipes do not fall out.
  · Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
  · When final tightening is forgotten, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
  · Expanded pipes can be corrected easily using an automatic machine after pipe setting.
  · The pipe can easily be held and secured because the connector between the pipe and the fitting is not prone to wobbling.

  CAD ：

  2D

  A partire da∗ ：	29.14 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Giunti ad attacco rapido SUSDAKE per tubazioni acciaio inox (presa idrante)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	18.28 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico con adattatore femmina per tubi in acciaio inossidabile

  HITACHI KINZOKU

  A mechanical tube fitting developed for stainless steel pipes. Highly reliable, it takes advantage of stainless steel's strength and light weight to provide superb corrosion and heat resistance.

  CAD ：

  2D

  A partire da∗ ：	12.70 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Giunto meccanico per tubatura in acciaio inossidabile filettato femmina a gomito

  HITACHI KINZOKU

  A mechanical tube fitting developed for stainless steel pipes. Highly reliable, it takes advantage of stainless steel's strength and light weight to provide superb corrosion and heat resistance.

  CAD ：

  2D

  A partire da∗ ：	19.69 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accoppiamenti ad attacco rapido per tubatura in acciaio inossidabile SUSDAKE (adattatore femmina)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	16.60 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Accoppiamenti ad attacco rapido per tubature in acciaio inossidabile SUSDAKE (filettato femmina a gomito)

  HITACHI KINZOKU

  Just insert the pipe into the coupling to finish construction without tools. The lip shape of the gasket applies suitable internal pressure to the gasket, providing stable sealing performance.

  A partire da∗ ：	29.37 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  KOMA SUS FIT, gomito a L

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  • Sconto volumi elevati

  A partire da∗ ：	13.59 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  KOMA SUS FIT, gomito a 45° 45L

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  • Sconto volumi elevati

  A partire da∗ ：	15.32 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  KOMA SUS FIT, riduttore attacco femmina, S

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  • Sconto volumi elevati

  A partire da∗ ：	13.12 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  KOMA SUS FIT, Tappo, Ca

  RIKEN

  A dedicated mechanical pipe expander fitting that demonstrates high load bearing capacity by expanding pipes.

  • Sconto volumi elevati

  A partire da∗ ：	6.73 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  KOMA SUS FIT, adattatore saldato, YA

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  • Sconto volumi elevati

  A partire da∗ ：	13.39 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  KOMA SUS FIT, adattatore maschio, AP

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  • Sconto volumi elevati

  A partire da∗ ：	11.52 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  KOMA SUS FIT, adattatore femmina AQ

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  • Sconto volumi elevati

  A partire da∗ ：	12.32 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  KOMA SUS FIT, gomito per rubinetti dell'acqua, WL

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  • Sconto volumi elevati

  A partire da∗ ：	13.32 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  KOMA SUS FIT, raccordo meccanico a espansione per gomito con rubinetto dell'acqua WTL

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  • Sconto volumi elevati

  A partire da∗ ：	19.24 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  KOMA SUS FIT, tipo scorrevole, per rubinetti dell'acqua, gomito con spallamento, UWTL

  RIKEN

  A pipe-expanding mechanical fitting that uses a dedicated pipe expander for high load bearing capacity.

  • Sconto volumi elevati

  A partire da∗ ：	19.24 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

Loading...