Ejector Sleeves


Numero di dati da visualizzare
30
45
60
Ordina
  1. 1
Marchio
Serie prodotto
A partire da
Consegna da
Product composition
Material
Surface treatment
Head thickness
Shaft diameter tolerance
D/P (Shaft diameter)(mm)
V (Hole diameter)(mm)
Concentricity between the hole and shaft diameters
Boring method
Inner dia. tolerance
Tapered or not
Center pin tip shape

    Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

      Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

        Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

          Short Ejector Sleeves (Bushings For Ejector Pins)

            Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

              Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                  Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

                    Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                      Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

                        Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                          Short Ejector Sleeves (Bushings for straight ejector pins)

                            Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

                              Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

                                Marchio

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                Serie prodotto

                                Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

                                Short Ejector Sleeves (Bushings For Ejector Pins)

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

                                Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

                                Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                                Short Ejector Sleeves (Bushings for straight ejector pins)

                                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

                                A partire da

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                Consegna da Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo
                                Product compositionSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeve
                                MaterialSKH51SKD61SKD61SKD61SKD61SKH51SKD61SKD61SKD61SKD61SKH51SKH51SKD61SKD61SKD61
                                Surface treatmentNoNitridedNitridedNitridedNitridedNoNitridedNitridedNitridedNitridedNoNoNitridedNitridedNitrided
                                Head thickness4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)4mm(T4)6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4)6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)4mm(T4)4mm(T4)4mm(T4)
                                Shaft diameter tolerance0/-0.005 / -0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.020/-0.005 / -0.01/-0.02-0.01/-0.02-0.01/-0.02 / -0.01/-0.03-0.01/-0.02 / -0.01/-0.03-0.01/-0.02 / -0.01/-0.030/-0.0050/-0.005 / -0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02
                                D/P (Shaft diameter)(mm)3.2 ~ 144 ~ 163.5 ~ 204 ~ 103.5 ~ 103.2 ~ 144 ~ 164 ~ 204 ~ 203.5 ~ 202.5 ~ 82.5 ~ 84 ~ 104 ~ 103.5 ~ 10
                                V (Hole diameter)(mm)0.8 ~ 12.21.5 ~ 3001.5 ~ 161.5 ~ 81.5 ~ 7.90.8 ~ 12.21.5 ~ 121.5 ~ 151.5 ~ 151.5 ~ 161 ~ 61 ~ 6.81.5 ~ 81.5 ~ 81.5 ~ 8
                                Concentricity between the hole and shaft diameters◎0.01◎0.06◎0.06◎0.06◎0.03◎0.005 / ◎0.01◎0.06◎0.06◎0.06◎0.06◎0.005◎0.01◎0.03◎0.03◎0.03
                                Boring methodWire cutting & polishingReamingReamingReamingReamingGrindingReamingReamingReamingReamingGrinding-ReamingReamingReaming
                                Inner dia. tolerance+0.01/0H7H7H7H7+0.005/0 / +0.01/0H7H7H7H7+0.005/0+0.005/0 / +0.01/0H7H7H7
                                Tapered or notNoNoNoNoNoNoNoNoNoNoYesYesNoNoNo
                                Center pin tip shapeNoNoNoNoNoNoNoNoNoNoNoNoNoNoNo

                                Loading...

                                1. 1

                                Categorie relative a Ejector Sleeves