Ejector Sleeves

Numero di dati da visualizzare
30
45
60
Ordina
  1. 1
Marchio
Serie prodotto
A partire da
Consegna da
Product composition
Material
Surface treatment
Head thickness
D (Shaft diameter)(mm)
P (Tip diameter)(mm)
V (Hole diameter)(mm)
Concentricity
Boring method
Inner dia. tolerance
Tapered or not
Shaft diameter tolerance

    Precision Stepped Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

      Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/JIS Head/Free Designation Type-

        Precision Small Diameter·Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/0.3mm Wall Type-

          Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/Free Designation Type

            Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/Blank Type-

              Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/L Dimension Designation Type-

                Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/4mm Head/Free Designation Type-

                  Marchio

                  MISUMI

                  MISUMI

                  MISUMI

                  MISUMI

                  MISUMI

                  MISUMI

                  MISUMI

                  MISUMI

                  Serie prodotto

                  Precision Stepped Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/JIS Head/Free Designation Type-

                  Precision Small Diameter·Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/0.3mm Wall Type-

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/Free Designation Type

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/Blank Type-

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/L Dimension Designation Type-

                  Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/4mm Head/Free Designation Type-

                  A partire da

                  -

                  -

                  -

                  -

                  -

                  -

                  -

                  -

                  Consegna da Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo Preventivo
                  Product compositionSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeve
                  MaterialSKH51SKD61SKH51SKD61SKD61SKD61SKH51SKD61
                  Surface treatmentNoNitridedNoNitridedNitridedNitridedNoNitrided
                  Head thickness4mm(T4) / 6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 8mm(JIS)4mm(T4) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4)
                  D (Shaft diameter)(mm)3.5 ~ 2505 ~ 202.5 ~ 64 ~ 104 ~ 204 ~ 203.5 ~ 2504 ~ 16
                  P (Tip diameter)(mm)3.2 ~ 12.93.5 ~ 19.951.8 ~ 5.953 ~ 9.953 ~ 6.53 ~ 6.53.2 ~ 12.93 ~ 15.95
                  V (Hole diameter)(mm)0.8 ~ 11.72 ~ 160.8 ~ 5.11.5 ~ 7.91.5 ~ 151.5 ~ 150.8 ~ 11.71.5 ~ 13
                  Concentricity◎0.01◎0.06◎0.005◎0.03◎0.06◎0.06◎0.005 / ◎0.01◎0.06
                  Boring methodWire cutting & polishingReamingGrindingReamingReamingReamingGrindingReaming
                  Inner dia. tolerance+0.01/0H7+0.005/0H7H7H7+0.005/0 / +0.01/0H7
                  Tapered or notNoNoNoNoNoNoNoNo
                  Shaft diameter tolerance-0.01/-0.02-0.01/-0.020/-0.005-0.01/-0.02-0.01/-0.02-0.01/-0.020/-0.005 / -0.01/-0.02-0.01/-0.02

                  Loading...

                  1. 1

                  Categorie relative a Ejector Sleeves