Straight Center Pins


Numero di dati da visualizzare
30
45
60
Ordina
  1. 1
Marchio
Serie prodotto
A partire da
Consegna da
Material
Surface treatment
Head thickness
Shaft diameter tolerance
D/P (Shaft diameter)(mm)
Tip shape
With/without cooling hole
Applicable ejector sleeves inner diameter tolerance

    Straight Center Pins With Tip Processed -High Speed Steel SKH51/Shaft Diameter (D) Selection Type-

      Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection Type-

        Tip Processed Center Pins With Cooling Hole -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection Type-

          Straight Center Pins With Tip Processed -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments) Type-

            Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.1mm Increments) Type-

            Marchio

            MISUMI

            MISUMI

            MISUMI

            MISUMI

            MISUMI

            Serie prodotto

            Straight Center Pins With Tip Processed -High Speed Steel SKH51/Shaft Diameter (D) Selection Type-

            Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection Type-

            Tip Processed Center Pins With Cooling Hole -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection Type-

            Straight Center Pins With Tip Processed -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments) Type-

            Straight Center Pins With Tip Processed -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.1mm Increments) Type-

            A partire da

            -

            -

            -

            -

            -

            Consegna da Preventivo Preventivo Preventivo Preventivo Preventivo
            MaterialSKH51SKD61SKD61SKH51SKD61
            Surface treatmentNoNitridedNitridedNoNitrided
            Head thickness4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)
            Shaft diameter tolerance0/-0.005 / -0.01/-0.02-0.01/-0.02 / -0.01/-0.02 (Reference tolerance)-0.01/-0.02 / -0.01/-0.02 (Reference tolerance)0/-0.005 / -0.01/-0.02-0.01/-0.02 / -0.01/-0.02 (Reference tolerance)
            D/P (Shaft diameter)(mm)1 ~ 121.5 ~ 166 ~ 160.8 ~ 11.991.5 ~ 15.9
            Tip shapeC / G / T / R / BC / G / T / R / BC / G / T / R / BC / G / T / R / BC / G / T / R / B
            With/without cooling holeNoNoYesNoNo
            Applicable ejector sleeves inner diameter tolerance+0.01/0 or H7+0.01/0 or H7+0.01/0 or H7+0.01/0 or H7+0.01/0 or H7

            Loading...

            1. 1

            Categorie relative a Straight Center Pins