?* Informazioni su tempi di consegna
Consegna da : | Preventivo |
---|
Consegna da : | Preventivo |
---|
Consegna da : | Preventivo |
---|
Consegna da : | Preventivo |
---|
Consegna da : | Preventivo |
---|
Marchio |
---|
Serie prodotto |
A partire da∗ |
Consegna da |
Material |
Surface treatment |
Head thickness |
Shaft diameter tolerance |
D/P (Shaft diameter)(mm) |
Step (Step shape) |
Shape (Tip shape) |
Applicable sleeve hole diameter tolerance |
With/without cooling hole |
Marchio | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
---|---|---|---|---|---|
Serie prodotto | Taperless One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (D) Selection Type- | Taperless One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection Type- | |||
A partire da∗ | - | - | - | - | - |
Consegna da | Preventivo | Preventivo | Preventivo | Preventivo | Preventivo |
Material | SKH51 | SKH51 | SKD61 | SKD61 | SKD61 |
Surface treatment | No | No | Nitrided | Nitrided | Nitrided |
Head thickness | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) |
Shaft diameter tolerance | 0/-0.005 / -0.01/-0.02 | 0/-0.005 / -0.01/-0.02 | -0.01/-0.02 | -0.01/-0.02 / -0.01/-0.02 (Reference tolerance) | -0.01/-0.02 (Reference tolerance) |
D/P (Shaft diameter)(mm) | 1 ~ 12 | 0.8 ~ 11.99 | 1.5 ~ 16 | 1.5 ~ 15.99 | 6 ~ 16 |
Step (Step shape) | B / C / D / E | B / C / D / E | B / C / D / E | B / C / D / E | B / C / D / E |
Shape (Tip shape) | No processing / C / G / T / R / B | No processing / C / G / T / R / B | No processing / C / G / T / R / B | No processing / C / G / T / R / B | No processing / C / G / T / R / B |
Applicable sleeve hole diameter tolerance | +0.005/0 / +0.01/0 or H7 | +0.005/0 / +0.01/0 or H7 | +0.01/0 or H7 | +0.01/0 or H7 | +0.01/0 or H7 |
With/without cooling hole | No | No | No | No | Yes |
Loading...
Vi chiediamo gentilmente di aiutarci a migliorare il nostro sito
É gradito un commento sull'e-Catalog MISUMI
Grazie della collaborazione.
Vi preghiamo di utilizzare l'apposito modulo di richiesta.