• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Punzoni da taglio / testa cilindrica / perno di forzamento / blocco antirotazione / WPC, HW

Punzoni da taglio / testa cilindrica / perno di forzamento / blocco antirotazione / WPC, HW

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • FLANGE
  • SKH51
  • SKD11
  • POWDER HSS
  • HW
  • WPC

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
Codice componente
GHW-PJDL4-[50-80/10]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LC[39-49.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LC[50.1-59.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LC[60.1-69.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LC[70.1-79.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LCT[39-49.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LCT[50.1-59.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LCT[60.1-69.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LCT[70.1-79.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LMT[39-49.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LMT[50.1-59.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LMT[60.1-69.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL4-LMT[70.1-79.9/0.1]-P[2-3.97/0.01]-W[2-2.8/0.01]
GHW-PJDL5-[50-80/10]-P[2-4.97/0.01]-W[2-3.8/0.01]
GHW-PJDL5-[50-80/10]-P[2-4.97/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL5-[50-80/10]-PC[1.8-1.99/0.01]-W[2-3.8/0.01]
GHW-PJDL5-[50-80/10]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL5-LC[39-80/0.1]-P[2-4.97/0.01]-W[2-3.8/0.01]
GHW-PJDL5-LC[39-80/0.1]-P[2-4.97/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL5-LC[39-80/0.1]-PC[1.8-1.99/0.01]-W[2-3.8/0.01]
GHW-PJDL5-LC[39-80/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL5-LCT[39-80/0.1]-P[2-4.97/0.01]-W[2-3.8/0.01]
GHW-PJDL5-LCT[39-80/0.1]-P[2-4.97/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL5-LCT[39-80/0.1]-PC[1.8-1.99/0.01]-W[2-3.8/0.01]
GHW-PJDL5-LCT[39-80/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL5-LMT[39-80/0.1]-P[2-4.97/0.01]-W[2-3.8/0.01]
GHW-PJDL5-LMT[39-80/0.1]-P[2-4.97/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL5-LMT[39-80/0.1]-PC[1.8-1.99/0.01]-W[2-3.8/0.01]
GHW-PJDL5-LMT[39-80/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL6-[50-80/10]-P[2-5.97/0.01]-W[2-4.8/0.01]
GHW-PJDL6-[50-80/10]-P[2-5.97/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL6-[50-80/10]-PC[1.8-1.99/0.01]-W[2-4.8/0.01]
GHW-PJDL6-[50-80/10]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL6-LC[39-80/0.1]-P[2-5.97/0.01]-W[2-4.8/0.01]
GHW-PJDL6-LC[39-80/0.1]-P[2-5.97/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL6-LC[39-80/0.1]-PC[1.8-1.99/0.01]-W[2-4.8/0.01]
GHW-PJDL6-LC[39-80/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL6-LCT[39-80/0.1]-P[2-5.97/0.01]-W[2-4.8/0.01]
GHW-PJDL6-LCT[39-80/0.1]-P[2-5.97/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL6-LCT[39-80/0.1]-PC[1.8-1.99/0.01]-W[2-4.8/0.01]
GHW-PJDL6-LCT[39-80/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL6-LMT[39-80/0.1]-P[2-5.97/0.01]-W[2-4.8/0.01]
GHW-PJDL6-LMT[39-80/0.1]-P[2-5.97/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL6-LMT[39-80/0.1]-PC[1.8-1.99/0.01]-W[2-4.8/0.01]
GHW-PJDL6-LMT[39-80/0.1]-PC[1.8-1.99/0.01]-WC[1.8-1.99/0.01]
GHW-PJDL8-[50-100/10]-P[3-7.97/0.01]-W[3-5.8/0.01]
GHW-PJDL8-[50-100/10]-P[3-7.97/0.01]-WC[2.5-2.99/0.01]
GHW-PJDL8-[50-100/10]-PC[2.5-2.99/0.01]-W[3-5.8/0.01]
GHW-PJDL8-[50-100/10]-PC[2.5-2.99/0.01]-WC[2.5-2.99/0.01]
GHW-PJDL8-LC[33-100/0.1]-P[3-7.97/0.01]-W[3-5.8/0.01]
GHW-PJDL8-LC[33-100/0.1]-P[3-7.97/0.01]-WC[2.5-2.99/0.01]
GHW-PJDL8-LC[33-100/0.1]-PC[2.5-2.99/0.01]-W[3-5.8/0.01]
GHW-PJDL8-LC[33-100/0.1]-PC[2.5-2.99/0.01]-WC[2.5-2.99/0.01]
GHW-PJDL8-LCT[33-100/0.1]-P[3-7.97/0.01]-W[3-5.8/0.01]
GHW-PJDL8-LCT[33-100/0.1]-P[3-7.97/0.01]-WC[2.5-2.99/0.01]
GHW-PJDL8-LCT[33-100/0.1]-PC[2.5-2.99/0.01]-W[3-5.8/0.01]
GHW-PJDL8-LCT[33-100/0.1]-PC[2.5-2.99/0.01]-WC[2.5-2.99/0.01]
GHW-PJDL8-LMT[33-100/0.1]-P[3-7.97/0.01]-W[3-5.8/0.01]
GHW-PJDL8-LMT[33-100/0.1]-P[3-7.97/0.01]-WC[2.5-2.99/0.01]
GHW-PJDL8-LMT[33-100/0.1]-PC[2.5-2.99/0.01]-W[3-5.8/0.01]
Codice componenteQuantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSJector Tip shape Material Surface treatment B (Tip length) D (Shank diameter)
(mm) 		P (Tip dimension)
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		LCT (Head thickness tolerance change + Total length alteration)
(mm) 		LMT (Head thickness tolerance change + Total length alteration)
(mm) 		PC (Tip dimension alteration)
(mm) 		R (Tip corner R)
(mm) 		W (Tip dimension)
(mm) 		WC (Tip dimension alteration)
(mm)
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.9750 ～ 80-----2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97-39 ～ 49.9----2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97-50.1 ～ 59.9----2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97-60.1 ～ 69.9----2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97-70.1 ～ 79.9----2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97--39 ～ 49.9---2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97--50.1 ～ 59.9---2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97--60.1 ～ 69.9---2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97--70.1 ～ 79.9---2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97---39 ～ 49.9--2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97---50.1 ～ 59.9--2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97---60.1 ～ 69.9--2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL42 ～ 3.97---70.1 ～ 79.9--2 ～ 2.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL52 ～ 4.9750 ～ 80-----2 ～ 3.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL52 ～ 4.9750 ～ 80------1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL5-50 ～ 80---1.8 ～ 1.99-2 ～ 3.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL5-50 ～ 80---1.8 ～ 1.99--1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL52 ～ 4.97-39 ～ 80----2 ～ 3.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL52 ～ 4.97-39 ～ 80-----1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL5--39 ～ 80--1.8 ～ 1.99-2 ～ 3.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL5--39 ～ 80--1.8 ～ 1.99--1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL52 ～ 4.97--39 ～ 80---2 ～ 3.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL52 ～ 4.97--39 ～ 80----1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL5---39 ～ 80-1.8 ～ 1.99-2 ～ 3.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL5---39 ～ 80-1.8 ～ 1.99--1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL52 ～ 4.97---39 ～ 80--2 ～ 3.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL52 ～ 4.97---39 ～ 80---1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL5----39 ～ 801.8 ～ 1.99-2 ～ 3.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL5----39 ～ 801.8 ～ 1.99--1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL62 ～ 5.9750 ～ 80-----2 ～ 4.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL62 ～ 5.9750 ～ 80------1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL6-50 ～ 80---1.8 ～ 1.99-2 ～ 4.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL6-50 ～ 80---1.8 ～ 1.99--1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL62 ～ 5.97-39 ～ 80----2 ～ 4.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL62 ～ 5.97-39 ～ 80-----1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL6--39 ～ 80--1.8 ～ 1.99-2 ～ 4.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL6--39 ～ 80--1.8 ～ 1.99--1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL62 ～ 5.97--39 ～ 80---2 ～ 4.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL62 ～ 5.97--39 ～ 80----1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL6---39 ～ 80-1.8 ～ 1.99-2 ～ 4.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL6---39 ～ 80-1.8 ～ 1.99--1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL62 ～ 5.97---39 ～ 80--2 ～ 4.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL62 ～ 5.97---39 ～ 80---1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL6----39 ～ 801.8 ～ 1.99-2 ～ 4.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL6----39 ～ 801.8 ～ 1.99--1.8 ～ 1.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL83 ～ 7.9750 ～ 100-----3 ～ 5.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL83 ～ 7.9750 ～ 100------2.5 ～ 2.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL8-50 ～ 100---2.5 ～ 2.99-3 ～ 5.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL8-50 ～ 100---2.5 ～ 2.99--2.5 ～ 2.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL83 ～ 7.97-33 ～ 100----3 ～ 5.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL83 ～ 7.97-33 ～ 100-----2.5 ～ 2.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL8--33 ～ 100--2.5 ～ 2.99-3 ～ 5.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL8--33 ～ 100--2.5 ～ 2.99--2.5 ～ 2.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL83 ～ 7.97--33 ～ 100---3 ～ 5.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL83 ～ 7.97--33 ～ 100----2.5 ～ 2.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL8---33 ～ 100-2.5 ～ 2.99-3 ～ 5.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL8---33 ～ 100-2.5 ～ 2.99--2.5 ～ 2.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL83 ～ 7.97---33 ～ 100--3 ～ 5.8-
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL83 ～ 7.97---33 ～ 100---2.5 ～ 2.99
1 Preventivo 10Standard typeDPowdered high-speed steelHW coatingL8----33 ～ 1002.5 ～ 2.99-3 ～ 5.8-

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
 

Informazioni di base

Heavy-load punches No Shank type Single-stepped Shank (mounting part) shape Key flat
Shank diameter D tolerance +0.005/0 T (Head thickness/plate thickness)(mm) 5

Configura

Ripristina

2,668Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • Jector

    • Standard type
    • Spring reinforced type

    Ripristina

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Ripristina

  • Surface treatment

    • HW coating
    • WPC

    Ripristina

  • B (Tip length)

    • L
    • S
    • X

    Ripristina

  • D (Shank diameter)(mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25

    Ripristina

  • P (Tip dimension)(mm)

     [1-24.97/0.01mmpezzi]

    Ripristina

  • L (L dimension)(mm)

     [40-100/10mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [32-100/0.1mmpezzi]

    Ripristina

  • LCT (Head thickness tolerance change + Total length alteration)(mm)

     [32-100/0.1mmpezzi]

    Ripristina

  • LMT (Head thickness tolerance change + Total length alteration)(mm)

     [32-100/0.1mmpezzi]

    Ripristina

  • PC (Tip dimension alteration)(mm)

     [1.8-1.99/0.01mmpezzi][2.5-2.99/0.01mmpezzi][5-5.99/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     

    Ripristina

  • W (Tip dimension)(mm)

     [1-22.8/0.01mmpezzi]

    Ripristina

  • WC (Tip dimension alteration)(mm)

     [1.8-1.99/0.01mmpezzi][2.5-2.99/0.01mmpezzi][5-6.99/0.01mmpezzi]

    Ripristina

  • Tipo

    • GHW-PJAL
    • GHW-PJAS
    • GHW-PJDL
    • GHW-PJDS
    • GHW-PJEL
    • GHW-PJES
    • GHW-PJGL
    • GHW-PJGS
    • GHW-PJRL
    • GHW-PJRS
    • GHW-PJVAL
    • GHW-PJVAS
    • GHW-PJVDL
    • GHW-PJVDS
    • GHW-PJVEL
    • GHW-PJVES
    • GHW-PJVGL
    • GHW-PJVGS
    • GHW-PJVRL
    • GHW-PJVRS
    • GW-PJAL
    • GW-PJAS
    • GW-PJDL
    • GW-PJDS
    • GW-PJEL
    • GW-PJES
    • GW-PJGL
    • GW-PJGS
    • GW-PJRL
    • GW-PJRS
    • GW-PJVAL
    • GW-PJVAS
    • GW-PJVDL
    • GW-PJVDS
    • GW-PJVEL
    • GW-PJVES
    • GW-PJVGL
    • GW-PJVGS
    • GW-PJVRL
    • GW-PJVRS
    • GW-SJAL
    • GW-SJAS
    • GW-SJAX
    • GW-SJDL
    • GW-SJDS
    • GW-SJDX
    • GW-SJEL
    • GW-SJES
    • GW-SJEX
    • GW-SJGL
    • GW-SJGS
    • GW-SJGX
    • GW-SJRL
    • GW-SJRS
    • GW-SJRX
    • GW-SJVAL
    • GW-SJVAS
    • GW-SJVAX
    • GW-SJVDL
    • GW-SJVDS
    • GW-SJVDX
    • GW-SJVEL
    • GW-SJVES
    • GW-SJVEX
    • GW-SJVGL
    • GW-SJVGS
    • GW-SJVGX
    • GW-SJVRL
    • GW-SJVRS
    • GW-SJVRX

    Ripristina

  • Tip shape

    • A
    • D
    • R
    • E
    • G

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.